Comair Rotron Patriot x2

Gizmologist · 04-27-2003, 02:26 PM

Model: PD24B2

Comair Rotron Patriot 24V dc. Terminals & ball bearing fans. 235 CFM, 51.2 dBa

Size: 6.75" dia x 2.00" deep (171.5mm x 50.8mm)
Operating Temperature Range: -10°C to +70°C
Storage Temperature Range: -40°C to +85°C
Feathered Edge™ for Lower Noise
Ball Bearings
Weight: 1.84 Lbs. (.84 Kg)

I have 2 of these beasts in excellent working order.

$25 + s/h for both.

Comair Rotron Tarzan:
Tarzan® AC
AC Tubeaxial Fan
FEATURES:
Size: 6.91" x 4.40" deep (176mm x 112mm)
Air Flow: 330 CFM / 65DBA
Voltage: 115 & 230 VAC (50/60 Hz)
Operating Temperature Range: -10°C to +70°C
Storage Temperature Range: -40°C to +85°C
Ball Bearings
Terminal connection
Weight: 5.0 Lbs. (2.27 Kg)

$55

I have parts from a Thermotek T252 Water Chiller I have all but the actual enclosure & the dehumidifier. Both which are not necessary to operate this chiller. It's all working properly but it's been parted out so buyer-beware (some assembly required). I can ship it with everything connected so you know what goes where. It's capable of chilling water to below 5 degrees celsius.

I'm lookin' to get about $150 for it but of course...i'm open to offers etc.

Also have an Iwaki MD-70RLZ 11.4 GPM $175

Thanks for stoppin' by, feel free to ask any questions...if motivated, I could take some pictures.

Oh and I have feedback at heatware & eBay (over 140 positive & no negative...)

ciscokid454 · 04-29-2003, 10:29 AM

shipping and handling to 30066?

Gizmologist · 04-30-2003, 11:20 PM

$12-14 for USPS Priority.

m3_arun · 05-18-2003, 03:19 PM

12v or AC

Gizmologist · 05-18-2003, 03:56 PM

zThey are 24volt AC

m3_arun · 05-19-2003, 01:09 AM

nm sorry

airspirit · 05-20-2003, 01:42 PM

They can be run at 12V. It will keep them nice and quiet ... they like it alot.

04-27-2003, 02:26 PM	#1
Gizmologist Cooling Neophyte Join Date: Apr 2003 Location: Washington D.C. area Posts: 13	FS: Fans, Water Chiller & more Model: PD24B2 Comair Rotron Patriot 24V dc. Terminals & ball bearing fans. 235 CFM, 51.2 dBa Size: 6.75" dia x 2.00" deep (171.5mm x 50.8mm) Operating Temperature Range: -10°C to +70°C Storage Temperature Range: -40°C to +85°C Feathered Edge™ for Lower Noise Ball Bearings Weight: 1.84 Lbs. (.84 Kg) I have 2 of these beasts in excellent working order. $25 + s/h for both. Comair Rotron Tarzan: Tarzan® AC AC Tubeaxial Fan FEATURES: Size: 6.91" x 4.40" deep (176mm x 112mm) Air Flow: 330 CFM / 65DBA Voltage: 115 & 230 VAC (50/60 Hz) Operating Temperature Range: -10°C to +70°C Storage Temperature Range: -40°C to +85°C Ball Bearings Terminal connection Weight: 5.0 Lbs. (2.27 Kg) $55 I have parts from a Thermotek T252 Water Chiller I have all but the actual enclosure & the dehumidifier. Both which are not necessary to operate this chiller. It's all working properly but it's been parted out so buyer-beware (some assembly required). I can ship it with everything connected so you know what goes where. It's capable of chilling water to below 5 degrees celsius. I'm lookin' to get about $150 for it but of course...i'm open to offers etc. Also have an Iwaki MD-70RLZ 11.4 GPM $175 Thanks for stoppin' by, feel free to ask any questions...if motivated, I could take some pictures. Oh and I have feedback at heatware & eBay (over 140 positive & no negative...) Last edited by Brad; 05-25-2003 at 01:54 PM.

04-29-2003, 10:29 AM	#2
ciscokid454 Cooling Savant Join Date: Sep 2002 Location: Fort Worth, TX Posts: 102	shipping and handling to 30066? __________________ yeah, hi, I umm... oh crap this isn't a personal

05-18-2003, 03:19 PM	#4
m3_arun Cooling Neophyte Join Date: Oct 2002 Location: san jose, ca Posts: 91	12v or AC __________________ AthlonXP 1800+ @ 135x11.5 Epox 8k5a2+ Antec SX830 case 256MB Micron PC2400 WC system soon... Iwaki MD-30RZ (getting fittings right now) Cathar WW block #102 (arrived) Heater core (still pondering) (still need to get tubing)

05-19-2003, 01:09 AM	#6
m3_arun Cooling Neophyte Join Date: Oct 2002 Location: san jose, ca Posts: 91	nm sorry __________________ AthlonXP 1800+ @ 135x11.5 Epox 8k5a2+ Antec SX830 case 256MB Micron PC2400 WC system soon... Iwaki MD-30RZ (getting fittings right now) Cathar WW block #102 (arrived) Heater core (still pondering) (still need to get tubing)

05-20-2003, 01:42 PM	#7
airspirit Been /.'d... have you? Join Date: Jul 2002 Location: Moscow, ID Posts: 1,986	They can be run at 12V. It will keep them nice and quiet ... they like it alot. __________________ #!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied

04-30-2003, 11:20 PM	#3
Gizmologist Cooling Neophyte Join Date: Apr 2003 Location: Washington D.C. area Posts: 13	$12-14 for USPS Priority.

05-18-2003, 03:56 PM	#5
Gizmologist Cooling Neophyte Join Date: Apr 2003 Location: Washington D.C. area Posts: 13	zThey are 24volt AC

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)