Updated pics of my w/c setup

Hellion_Prime · 10-16-2001, 08:56 PM

Here are some shots of the newest version of my watercooler. I've put the pump, res tank, and rad in an old AT full tower I have and run lines to my KS188 using 3' lengths of hydraulic hose and 1/2" hydraulic quick connects. They have ball fittings on each end of the fitting, so they seal very tight, with a minimal ammount of fluid loss at dissconect. Here's the pictures. Let me know what y'all think.

--HP

iceheart · 10-17-2001, 01:01 AM

Never mind

[ 10-17-2001: Message edited by: iceheart ]

Kevin · 10-17-2001, 02:34 AM

It seems like a cool implimentation because you can use the AT tower for a lot of cool shit like adding a chiller or extra radiator. The only problem is that it is bulky. Good job though.
-Kevin

Hellion_Prime · 10-17-2001, 10:23 AM

It is bulky, but it's better than having the components spread around on my workbench. Its a temporary measure untill I can upgrade to a cube case after christmas. I have some ideas for it for future projects, however..... =)

--HP

10-16-2001, 08:56 PM	#1
Hellion_Prime Cooling Neophyte Join Date: Nov 2000 Location: Arlington, MA, US Posts: 90	Updated pics of my w/c setup Here are some shots of the newest version of my watercooler. I've put the pump, res tank, and rad in an old AT full tower I have and run lines to my KS188 using 3' lengths of hydraulic hose and 1/2" hydraulic quick connects. They have ball fittings on each end of the fitting, so they seal very tight, with a minimal ammount of fluid loss at dissconect. Here's the pictures. Let me know what y'all think. --HP __________________ That which does not kill me had BETTER do enough damage to keep me from firing back!

10-17-2001, 01:01 AM	#2
iceheart Cooling Savant Join Date: Mar 2001 Location: Yonder Posts: 318	Never mind [ 10-17-2001: Message edited by: iceheart ] __________________ "If the majority is smarter than you, does that make everyone else a geek, or does it make you retarded?" - pHaestus

10-17-2001, 02:34 AM	#3
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	It seems like a cool implimentation because you can use the AT tower for a lot of cool shit like adding a chiller or extra radiator. The only problem is that it is bulky. Good job though. -Kevin __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

10-17-2001, 10:23 AM	#4
Hellion_Prime Cooling Neophyte Join Date: Nov 2000 Location: Arlington, MA, US Posts: 90	It is bulky, but it's better than having the components spread around on my workbench. Its a temporary measure untill I can upgrade to a cube case after christmas. I have some ideas for it for future projects, however..... =) --HP __________________ That which does not kill me had BETTER do enough damage to keep me from firing back!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)