my new waterblock project

ricc · 07-21-2003, 07:01 PM

I go to share my idea of one block that I am wanting to make, I drew established it in whom I searched for the internet on waterblock efficient, with an entrance and two exits, and the part that leans in die that it is of copper the carcass would only be in anodized alminium. I made pictures of block in ms paintbrush, they do not repair the quality, and my English :/

suggestions?

Scurl · 07-23-2003, 12:31 PM

copper + aluminium = NO!

Looks like it will be a nice block. Only i see one problem and thats the battery acid effect thats don't to happen.

hydrogen18 · 07-23-2003, 12:43 PM

scurl read, he said anodized aluminum. This is perfectly fine, Dtek produces blocks like that.

Scurl · 07-23-2003, 12:51 PM

Sorry. I got a perm hangover i think

but its going to be nice... all you have to do after that is give it to me

lol

ricc · 07-23-2003, 03:29 PM

Quote:

Originally posted by hydrogen18
scurl read, he said anodized aluminum. This is perfectly fine, Dtek produces blocks like that.

this exactly

ricc · 07-23-2003, 03:46 PM

more images:

.

new modification:

The Spyder · 07-23-2003, 08:46 PM

its *Copper not cooper

ricc · 07-23-2003, 10:20 PM

i sorry, my english is medium :/

Nuson · 07-27-2003, 02:54 AM

Would it be good to concentrate all the cooling power over the core? It might work better if the heat gets spread out more so that the water will flow over a larger area... or maybe not

Pritorian · 07-27-2003, 07:31 AM

Nice work. Looks very like some of the blocks that JayDee116 have made.

The only problem i see inn the designe, is the size of it

If you are going to have one inlet and two outlet´s it´s gonna be a close call on getting the tubing on the barbs ( nippels ).
i would in fact think that you wouldn´t get it on at all.

Btw what diameter are thoses barbs, they look small?

Looks too me to be a good block just needs som tweaking first

-P-

ricc · 07-27-2003, 09:38 AM

well this drawing is only to have a idea on block, had been made in mspaintbrush, but i will use barbs of 1/2 with distance of 0,5cm between the barbs

Pritorian · 07-27-2003, 03:56 PM

Ok, if so it`s gonna get a bit bigger then what it is on that drawing

07-21-2003, 07:01 PM	#1
ricc Cooling Neophyte Join Date: Dec 2002 Location: Itajaí/SC - Brazil Posts: 8	my new waterblock project I go to share my idea of one block that I am wanting to make, I drew established it in whom I searched for the internet on waterblock efficient, with an entrance and two exits, and the part that leans in die that it is of copper the carcass would only be in anodized alminium. I made pictures of block in ms paintbrush, they do not repair the quality, and my English :/ suggestions? __________________ Abit NF7-S v2.0 (BIOS 1.0) Tbred B 1700+ JIUHB@1?x2?? (1.??v) Extreme Watercooled by RadiatorF1&Innovaclone rev0.1 waterblock 1x256 DDR433 PC3500 PSU Delta DPS-300GB-A REV2 300w +PFC

07-23-2003, 12:31 PM	#2
Scurl Cooling Neophyte Join Date: Jun 2003 Location: Bay Area! Posts: 9	copper + aluminium = NO! Looks like it will be a nice block. Only i see one problem and thats the battery acid effect thats don't to happen. Last edited by Scurl; 07-23-2003 at 12:38 PM.

07-23-2003, 03:46 PM	#6
ricc Cooling Neophyte Join Date: Dec 2002 Location: Itajaí/SC - Brazil Posts: 8	more images: . new modification: __________________ Abit NF7-S v2.0 (BIOS 1.0) Tbred B 1700+ JIUHB@1?x2?? (1.??v) Extreme Watercooled by RadiatorF1&Innovaclone rev0.1 waterblock 1x256 DDR433 PC3500 PSU Delta DPS-300GB-A REV2 300w +PFC Last edited by ricc; 07-24-2003 at 12:46 PM.

07-23-2003, 08:46 PM	#7
The Spyder Cooling Neophyte Join Date: Aug 2002 Location: Oregon- Posts: 43	its *Copper not cooper __________________ So.... how ya doing?

07-23-2003, 10:20 PM	#8
ricc Cooling Neophyte Join Date: Dec 2002 Location: Itajaí/SC - Brazil Posts: 8	i sorry, my english is medium :/ __________________ Abit NF7-S v2.0 (BIOS 1.0) Tbred B 1700+ JIUHB@1?x2?? (1.??v) Extreme Watercooled by RadiatorF1&Innovaclone rev0.1 waterblock 1x256 DDR433 PC3500 PSU Delta DPS-300GB-A REV2 300w +PFC Last edited by ricc; 07-24-2003 at 10:44 AM.

07-23-2003, 12:43 PM	#3
hydrogen18 Cooling Savant Join Date: Feb 2003 Location: USA Posts: 248	scurl read, he said anodized aluminum. This is perfectly fine, Dtek produces blocks like that.

07-23-2003, 12:51 PM	#4
Scurl Cooling Neophyte Join Date: Jun 2003 Location: Bay Area! Posts: 9	Sorry. I got a perm hangover i think but its going to be nice... all you have to do after that is give it to me lol

07-27-2003, 02:54 AM	#9
Nuson Cooling Neophyte Join Date: Jul 2003 Location: USA Posts: 41	Would it be good to concentrate all the cooling power over the core? It might work better if the heat gets spread out more so that the water will flow over a larger area... or maybe not __________________ Frag Out!

07-27-2003, 07:31 AM	#10
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Nice work. Looks very like some of the blocks that JayDee116 have made. The only problem i see inn the designe, is the size of it If you are going to have one inlet and two outlet´s it´s gonna be a close call on getting the tubing on the barbs ( nippels ). i would in fact think that you wouldn´t get it on at all. Btw what diameter are thoses barbs, they look small? Looks too me to be a good block just needs som tweaking first -P- __________________ Boo!

07-27-2003, 09:38 AM	#11
ricc Cooling Neophyte Join Date: Dec 2002 Location: Itajaí/SC - Brazil Posts: 8	well this drawing is only to have a idea on block, had been made in mspaintbrush, but i will use barbs of 1/2 with distance of 0,5cm between the barbs __________________ Abit NF7-S v2.0 (BIOS 1.0) Tbred B 1700+ JIUHB@1?x2?? (1.??v) Extreme Watercooled by RadiatorF1&Innovaclone rev0.1 waterblock 1x256 DDR433 PC3500 PSU Delta DPS-300GB-A REV2 300w +PFC

07-27-2003, 03:56 PM	#12
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Ok, if so it`s gonna get a bit bigger then what it is on that drawing __________________ Boo!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)