Mag drive impeller trick

resago · 05-10-2001, 09:47 AM

could you just use goop at the seam where the impellor touches against the magnet???

magnet/goop on seam/impellor

==|X

this way you could remove it if you wanted to some day

Joe · 05-10-2001, 11:40 AM

Just keep air out of yer lines and you wont have any issues.

the second air bubbles accumulate in the impeller housing is when the impeller starts to chatter and vibrate.

So have a good air removal system in place and you will have no problems

05-10-2001, 09:47 AM	#1
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	Mag drive impeller trick could you just use goop at the seam where the impellor touches against the magnet??? magnet/goop on seam/impellor ==\|X this way you could remove it if you wanted to some day

05-10-2001, 11:40 AM	#2
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Just keep air out of yer lines and you wont have any issues. the second air bubbles accumulate in the impeller housing is when the impeller starts to chatter and vibrate. So have a good air removal system in place and you will have no problems __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)