For Sale

earlmred · 12-30-2000, 08:29 PM

I have the following items for sale:

Western Digital 6GB Caviar Drive $60.00 http://www.westerndigital.com/produc...es/wd64aa.html

Western Digital 2GB Caviar Drive $20.00 http://www.westerndigital.com/produc...s/ac22000.html

Floppy Drive $5.00

A Bunch of Memory Modules (i think EDO)
THis includes a known 8MB and 4MB module, and two others that I am not sure of, but I think they are 4MB and 2MB?? $10.00

486 Motherboard w/ CPU, 10Mbps ethernet card, Video Card, Modem, and ide controller ... has 6 sticks of memory in it ... not sure on the amount. $20.00

PS/2 2-Button Mouse $2.00

Power Cables (3) $5.00

DB25 Female/DB9 Male Adapter (Serial Port Adapter) (there are four of these) $4.00

2 Phone-Line to Parallel Port Adapters $2.00

2 PS/2 to Serial Adapters $2.00

1 PS/2 to AT Adapter $1.00

1 PS/2 Full Size Keyboard $3.00

1 NEC MultiSync 3D (slight burn-in on top of screen, but not really noticeable unless you're in a shell) $50.00 http://www.griffintechnology.com/monitors/NEC04.html

1 ABIT BE6-2 Rev.2.0 (board died on me, but everyone i've talked to thinks it just needs a new BIOS chip ... and i want an ASUS CUV4X anyways) $30.00 (SOLD)

All prices are w/o shipping ... you are to pay actual shipping USPS and packaging if necessary (monitor). To continental US ONLY.

[This message has been edited by earlmred (edited 12-30-2000).]

[This message has been edited by earlmred (edited 12-31-2000).]

Feable · 12-31-2000, 11:40 AM

What happened to make you believe the bios is the problem with the BE6? Did you flash the bios or short something out? Some event must of happened to kill the board and for you to believe that fixing the bios will fix it.

earlmred · 12-31-2000, 01:27 PM

I was overclocking my P3 700 in SoftMenu, and I stepped it down a notch on the FSB since it wasn't stable @ 123MHz, but was at 122, and then it decided not to come up after that.

Feable · 12-31-2000, 06:40 PM

YGM

Feable · 01-01-2001, 11:13 AM

YGMM

Rich W · 01-20-2001, 03:00 PM

Uhm... what do you mean by:
"2 Phone-Line to Parallel Port Adapters"

You mean a RJ45 connector on one side, and a parallel port on the other (ie, network print server??)

If so, I'll take both.

12-30-2000, 08:29 PM	#1
earlmred Cooling Neophyte Join Date: Nov 2000 Location: Ashburn, VA 20147 Posts: 29	For Sale I have the following items for sale: Western Digital 6GB Caviar Drive $60.00 http://www.westerndigital.com/produc...es/wd64aa.html Western Digital 2GB Caviar Drive $20.00 http://www.westerndigital.com/produc...s/ac22000.html Floppy Drive $5.00 A Bunch of Memory Modules (i think EDO) THis includes a known 8MB and 4MB module, and two others that I am not sure of, but I think they are 4MB and 2MB?? $10.00 486 Motherboard w/ CPU, 10Mbps ethernet card, Video Card, Modem, and ide controller ... has 6 sticks of memory in it ... not sure on the amount. $20.00 PS/2 2-Button Mouse $2.00 Power Cables (3) $5.00 DB25 Female/DB9 Male Adapter (Serial Port Adapter) (there are four of these) $4.00 2 Phone-Line to Parallel Port Adapters $2.00 2 PS/2 to Serial Adapters $2.00 1 PS/2 to AT Adapter $1.00 1 PS/2 Full Size Keyboard $3.00 1 NEC MultiSync 3D (slight burn-in on top of screen, but not really noticeable unless you're in a shell) $50.00 http://www.griffintechnology.com/monitors/NEC04.html 1 ABIT BE6-2 Rev.2.0 (board died on me, but everyone i've talked to thinks it just needs a new BIOS chip ... and i want an ASUS CUV4X anyways) $30.00 (SOLD) All prices are w/o shipping ... you are to pay actual shipping USPS and packaging if necessary (monitor). To continental US ONLY. [This message has been edited by earlmred (edited 12-30-2000).] [This message has been edited by earlmred (edited 12-31-2000).]

12-31-2000, 11:40 AM	#2
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	What happened to make you believe the bios is the problem with the BE6? Did you flash the bios or short something out? Some event must of happened to kill the board and for you to believe that fixing the bios will fix it.

12-31-2000, 01:27 PM	#3
earlmred Cooling Neophyte Join Date: Nov 2000 Location: Ashburn, VA 20147 Posts: 29	I was overclocking my P3 700 in SoftMenu, and I stepped it down a notch on the FSB since it wasn't stable @ 123MHz, but was at 122, and then it decided not to come up after that.

12-31-2000, 06:40 PM	#4
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	YGM

01-01-2001, 11:13 AM	#5
Feable Cooling Neophyte Join Date: Nov 2000 Location: Tampa Posts: 31	YGMM

01-20-2001, 03:00 PM	#6
Rich W Cooling Neophyte Join Date: Feb 2000 Posts: 77	Uhm... what do you mean by: "2 Phone-Line to Parallel Port Adapters" You mean a RJ45 connector on one side, and a parallel port on the other (ie, network print server??) If so, I'll take both.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)