MCW50 Compatability

Capt. Nemo · 06-09-2004, 05:41 PM

Does anyone know if the MCW50 fits on the ATI X800 series of video cards and or the new series of NVidia cards?

BillA · 06-09-2004, 08:19 PM

Gabe has been requesting the specs since May 24, still waiting

AngryAlpaca · 06-09-2004, 09:05 PM

"24 Pass Rad. on a Comair Rotron 24V @ 12V 172mm x 150mm Fan" You might want to change this out for something better... Big waste of a great fan.

Capt. Nemo · 06-10-2004, 04:48 PM

Quote:

Originally Posted by AngryAlpaca

"24 Pass Rad. on a Comair Rotron 24V @ 12V 172mm x 150mm Fan" You might want to change this out for something better... Big waste of a great fan.

I seem to be getting really good results from this Rad... I pulled it from an old A/C Referigerant Recovery unit, temps are no higher than 36 C full load. I live in Flodida and its already getting super hot here and I still havent seen it go up farther than that... also the thermister was trimmed and attached to the side of the core of the CPU with AS3 not sure how much more accurate it is though..

Capt. Nemo · 06-10-2004, 04:52 PM

Quote:

Originally Posted by unregistered

Gabe has been requesting the specs since May 24, still waiting

I guess Ill be waiting also..

Anemone · 06-13-2004, 02:26 PM

Me too looking for this as well as whether the 172w tec is needed for the heat load of the newer 16 pipe gpu's..

bmg · 06-13-2004, 08:35 PM

Quote:

Originally Posted by unregistered

Gabe has been requesting the specs since May 24, still waiting

Could you check the outside dimensions of the nvidia adapter plate for the mcw50 block? Using the my mcw50 on my 6800 ultra might be as simple as drilling some new holes, assuming the plate is large enough.

06-09-2004, 05:41 PM	#1
Capt. Nemo Cooling Neophyte Join Date: Feb 2004 Location: Florida Posts: 10	MCW50 Compatability Does anyone know if the MCW50 fits on the ATI X800 series of video cards and or the new series of NVidia cards? __________________ _________________________________________ Athlon XP Mobile 2400+ @ 2.4Ghz @1.75 V. Asus A7V8X Rev 1.04 Swiftech MCW50002 A Swiftech MCW 50 GPU Swiftech MCP 600 Pump 24 Pass Rad. on a Comair Rotron 24V @ 12V 172mm x 150mm Fan 2x256MB Kingston PC2700 Value Ram 1x80GB 8MB 7200RPM Maxtor

06-09-2004, 08:19 PM	#2
BillA CoolingWorks Tech Guy Formerly "Unregistered" Join Date: Dec 2000 Location: Posts: 2,371.493,106 Posts: 4,440	Gabe has been requesting the specs since May 24, still waiting

06-09-2004, 09:05 PM	#3
AngryAlpaca Cooling Savant Join Date: Jan 2004 Location: Alberta Posts: 631	"24 Pass Rad. on a Comair Rotron 24V @ 12V 172mm x 150mm Fan" You might want to change this out for something better... Big waste of a great fan.

06-13-2004, 02:26 PM	#6
Anemone Cooling Neophyte Join Date: Feb 2004 Location: Boston MA area Posts: 48	Me too looking for this as well as whether the 172w tec is needed for the heat load of the newer 16 pipe gpu's..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)