FS: PhaseChange Repair / Mod / Regas Equipment

Marci · 03-22-2005, 05:36 AM

Righty... as all our Prommi work is now done, me n' Fliptone have had a clear out of the garage...

What follows is everything you require to set yourself up repairing, regassing and customising prommies. Only thing missing is time, patience, and the ability to read!

It even comes with a few prommies for you to practice on

All the pix of the stuff below and info you need on what to do and how to use this lot is all in the PhaseChange section of these forums and O-CuK forums(HERE), as well as over at XtremeResources.com / XtremeSystems.org

This will be selling as one complete lot. No splits. Don't ask.

Refrigerants & Oils
All in 10kg bottles
R134a - Small Amount
R404a - full bottle
r507a - 1/2 bottle
R290 - Small Amount
R12 - Small Amount
1 n' a half bottles of Refrigerant Oil (POE)

Vac Pumps
1x Edwards Speedivac TSC150B
1x ROC-R ROA-702BN

nVentiv/ChipCon
1x Empty MkI Chassis, no Fascia, no panels.
1x MkI Complete with LianLi Kit - needs attention (Regas, Reinsulate)
1x MkI Complete with panels but no fascia - needs attention (Braise, Regas, Reinsulate)
1x MkI Condenser - needs braising
1x MkI Compressor & Starter Cap
3x Complete MkI Head Assemblies
1x AMD HeadKit
Sealing String (a few metres)
1x MkI Controller & Power Relay / Distribution Board
2x PAPST 240v 120mm fans
2x Sunon 12v 120mm fans
1x MkII LCD Mounting Kit

Refrigeration Parts
1x Complete set of Refrigeration Guages and Case
3x Spare Hoses for above
1x Flaring and Suaging Kit
1x Digital Thermometer & Probe
1x Refrigerant Detector
4mtrs 3/8" ID Refrigerant Hose (Parker)
2x Vampire Taps
1x Control Valve for above
9x Schraeder Fittings
3x Driers
1x Comparator
1x 3/8" OD Stainless Braid Refrigerant Hose
1x Baker Rev1 CPU Evap Head (Pre-Braised)
1x Pack of Halfords Metal Bonding Adhesive
1 n' a half rolls of 0.028" ID Cap Tube
10 mtrs 3/8" Copper Pipe
1x Small Pipe Cutter
1x Portable Oxy-Acetylene Braising Kit (with 2x Empty Oxygen bottles for recycling)
Assorted Pack of 25 to 30 Braising Rods
2 packs of Flux
LOTS of assorted refrigerant hose fittings, joints, Tee-Pieces, Elbows etc.

Insulation
5x 2mtr lengths of Armaflex Insulation
1x 15mtr Roll Armaflex Tape
1x Bottle Armaflex Adhesive

Miscellaneous
1x DangerDen AMD SockA TDX Waterblock
1x DangerDen AMD SockA RBX Waterblock
1x Swiftech MCW50 GPU Waterblock

Approx Total Value £1500

First £1000 takes the lot
Collect Only, from Wakefield, West Yorkshire, United Kingdom

Payment by Cheque (goods released once cleared) or Cash only.

03-22-2005, 05:36 AM	#1
Marci Cooling Savant Join Date: May 2003 Location: Wakefield, West Yorkshire, UK Posts: 486	FS: PhaseChange Repair / Mod / Regas Equipment Righty... as all our Prommi work is now done, me n' Fliptone have had a clear out of the garage... What follows is everything you require to set yourself up repairing, regassing and customising prommies. Only thing missing is time, patience, and the ability to read! It even comes with a few prommies for you to practice on All the pix of the stuff below and info you need on what to do and how to use this lot is all in the PhaseChange section of these forums and O-CuK forums(HERE), as well as over at XtremeResources.com / XtremeSystems.org This will be selling as one complete lot. No splits. Don't ask. Refrigerants & Oils All in 10kg bottles R134a - Small Amount R404a - full bottle r507a - 1/2 bottle R290 - Small Amount R12 - Small Amount 1 n' a half bottles of Refrigerant Oil (POE) Vac Pumps 1x Edwards Speedivac TSC150B 1x ROC-R ROA-702BN nVentiv/ChipCon 1x Empty MkI Chassis, no Fascia, no panels. 1x MkI Complete with LianLi Kit - needs attention (Regas, Reinsulate) 1x MkI Complete with panels but no fascia - needs attention (Braise, Regas, Reinsulate) 1x MkI Condenser - needs braising 1x MkI Compressor & Starter Cap 3x Complete MkI Head Assemblies 1x AMD HeadKit Sealing String (a few metres) 1x MkI Controller & Power Relay / Distribution Board 2x PAPST 240v 120mm fans 2x Sunon 12v 120mm fans 1x MkII LCD Mounting Kit Refrigeration Parts 1x Complete set of Refrigeration Guages and Case 3x Spare Hoses for above 1x Flaring and Suaging Kit 1x Digital Thermometer & Probe 1x Refrigerant Detector 4mtrs 3/8" ID Refrigerant Hose (Parker) 2x Vampire Taps 1x Control Valve for above 9x Schraeder Fittings 3x Driers 1x Comparator 1x 3/8" OD Stainless Braid Refrigerant Hose 1x Baker Rev1 CPU Evap Head (Pre-Braised) 1x Pack of Halfords Metal Bonding Adhesive 1 n' a half rolls of 0.028" ID Cap Tube 10 mtrs 3/8" Copper Pipe 1x Small Pipe Cutter 1x Portable Oxy-Acetylene Braising Kit (with 2x Empty Oxygen bottles for recycling) Assorted Pack of 25 to 30 Braising Rods 2 packs of Flux LOTS of assorted refrigerant hose fittings, joints, Tee-Pieces, Elbows etc. Insulation 5x 2mtr lengths of Armaflex Insulation 1x 15mtr Roll Armaflex Tape 1x Bottle Armaflex Adhesive Miscellaneous 1x DangerDen AMD SockA TDX Waterblock 1x DangerDen AMD SockA RBX Waterblock 1x Swiftech MCW50 GPU Waterblock Approx Total Value £1500 First £1000 takes the lot Collect Only, from Wakefield, West Yorkshire, United Kingdom Payment by Cheque (goods released once cleared) or Cash only. __________________ www.minimotosidecars.org / www.thermochill.com / www.themusiccollective.co.uk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)