Good temps ?

[dannzig] · 01-08-2002, 01:19 PM

I have just installed my h2o cooling system. My fulload temp is about 27c with seti loaded.

system specs .
duron 800@1000(133), 1.92v ( 1.85 in bios)
kt7a-r , 512mb kingmax pc150, yadda yadday yadda...

cooling:
homemade crossdrilled copperblock with big channels.
hayden tranny radiator ( the biglow pressure drop model from rad test)
eheim 1048.
all this is linked together with nice silicone hose

Butcher · 01-08-2002, 01:26 PM

Looks good, what's your ambient and water temps?

[dannzig] · 01-08-2002, 01:28 PM

i dunno the watertemps im getting as i have no way to control that. ambient temp is 17c right now but fulload temp does not get any higher when it climbs up to 20c (which is normal)

Butcher · 01-08-2002, 01:32 PM

27C on ambient of 20C is good going

I can hit 20C over water temps and water is normally 2-5C over ambient.

decodeddiesel · 01-08-2002, 01:32 PM

Those are fine temps, and a nice setup to boot. You should post some pics of that homemade block

Brad · 01-08-2002, 05:15 PM

7C above ambient for that cpu is very good. What fan is on the rad?

[dannzig] · 01-08-2002, 05:45 PM

a schrouded sunon 83cfm @ 7v ..... casetemp is 19c....

Brad · 01-08-2002, 07:17 PM

damn thats good. I was expecting you to say 100cfm +

that is a seriously great performing setup

[dannzig] · 01-09-2002, 02:06 AM

it has now risen to 28 degrees after about 24 hours of seti....

by the way im using the first version of artic silver between the block and cpu.

Brad · 01-09-2002, 04:48 PM

28C is still damned good, have you tried using cpu burn as well?

jaydee · 01-09-2002, 04:56 PM

My room temp is 23C right now which is about 73F. Water temp is 26.5C or 79F, and CPU is 31C with SETI running.

Yep, those look very good!!! Nice job!!!

[dannzig] · 01-09-2002, 05:37 PM

i will try cpuburn aswell ... last time i tried it it gave me 3-4c higher than seti ( i was using a taisol cobberbase w/ ystech 27cfm)

jaydee · 01-09-2002, 05:45 PM

Quote:

Originally posted by [dannzig]
i will try cpuburn aswell ... last time i tried it it gave me 3-4c higher than seti ( i was using a taisol cobberbase w/ ystech 27cfm)

yeah I ran toast and CPU burn and got about 3C higher than SETI and 2C higher than Folding. That was with the Xp1600@1553mhz 2.05Vcore. One of these days i will see what the Xp can really do.

[dannzig] · 01-09-2002, 06:03 PM

it seems that we both frequent this forum really often

jaydee · 01-09-2002, 06:13 PM

Quote:

Originally posted by [dannzig]
it seems that we both frequent this forum really often

yeah, I should be working on projects though for my site though.

Working on a variable speed fan controller similar to the rheobus. Should have it all posted by the end of tomorrow.

Brad · 01-09-2002, 06:15 PM

prime95 doesn't use 100% of the cpu, it only uses 70% or so. BurnK7 is designed for using 100% of a athlon cpu, and therefore is about the best. CPU Burn, and Toast are good too

[dannzig] · 01-10-2002, 01:56 AM

burnk7 is a bart of cpuburn right ? that is the one i ise when i test my rig... as i said i got 3 degrees higher than with seti. 31 degress after 2 hours.

deeznuts · 01-10-2002, 05:27 AM

Quote:

Originally posted by Brad
prime95 doesn't use 100% of the cpu, it only uses 70% or so. BurnK7 is designed for using 100% of a athlon cpu, and therefore is about the best. CPU Burn, and Toast are good too

then why the os say 100%? are they in cahoots or something?

[dannzig] · 01-10-2002, 10:51 AM

prime doesn´t use the 3dnow parts of the processor i think... or the other extensions.... but hell, what do i know

Brad · 01-10-2002, 04:12 PM

yeah, prime doesn't use all of some part of something in the athlon

burnk7 is designed to use 100% of the entire core in athlons

01-08-2002, 01:19 PM	#1
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	Good temps ? I have just installed my h2o cooling system. My fulload temp is about 27c with seti loaded. system specs . duron 800@1000(133), 1.92v ( 1.85 in bios) kt7a-r , 512mb kingmax pc150, yadda yadday yadda... cooling: homemade crossdrilled copperblock with big channels. hayden tranny radiator ( the biglow pressure drop model from rad test) eheim 1048. all this is linked together with nice silicone hose __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-08-2002, 01:26 PM	#2
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	Looks good, what's your ambient and water temps? __________________ Once upon a time, in a land far far away...

01-08-2002, 01:28 PM	#3
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	i dunno the watertemps im getting as i have no way to control that. ambient temp is 17c right now but fulload temp does not get any higher when it climbs up to 20c (which is normal) __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-08-2002, 01:32 PM	#4
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	27C on ambient of 20C is good going I can hit 20C over water temps and water is normally 2-5C over ambient. __________________ Once upon a time, in a land far far away...

01-08-2002, 05:45 PM	#7
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	a schrouded sunon 83cfm @ 7v ..... casetemp is 19c.... __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-08-2002, 01:32 PM	#5
decodeddiesel Cooling Savant Join Date: Oct 2001 Location: classified Posts: 534	Those are fine temps, and a nice setup to boot. You should post some pics of that homemade block

01-08-2002, 05:15 PM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	7C above ambient for that cpu is very good. What fan is on the rad?

01-08-2002, 07:17 PM	#8
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	damn thats good. I was expecting you to say 100cfm + that is a seriously great performing setup

01-09-2002, 02:06 AM	#9
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	it has now risen to 28 degrees after about 24 hours of seti.... by the way im using the first version of artic silver between the block and cpu. __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-09-2002, 04:48 PM	#10
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	28C is still damned good, have you tried using cpu burn as well?

01-09-2002, 04:56 PM	#11
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	My room temp is 23C right now which is about 73F. Water temp is 26.5C or 79F, and CPU is 31C with SETI running. Yep, those look very good!!! Nice job!!!

01-09-2002, 05:37 PM	#12
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	i will try cpuburn aswell ... last time i tried it it gave me 3-4c higher than seti ( i was using a taisol cobberbase w/ ystech 27cfm) __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200 Last edited by [dannzig]; 01-09-2002 at 05:41 PM.

01-09-2002, 06:03 PM	#14
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	it seems that we both frequent this forum really often __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-09-2002, 06:15 PM	#16
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	prime95 doesn't use 100% of the cpu, it only uses 70% or so. BurnK7 is designed for using 100% of a athlon cpu, and therefore is about the best. CPU Burn, and Toast are good too

01-10-2002, 01:56 AM	#17
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	burnk7 is a bart of cpuburn right ? that is the one i ise when i test my rig... as i said i got 3 degrees higher than with seti. 31 degress after 2 hours. __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-10-2002, 10:51 AM	#19
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	prime doesn´t use the 3dnow parts of the processor i think... or the other extensions.... but hell, what do i know __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

01-10-2002, 04:12 PM	#20
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yeah, prime doesn't use all of some part of something in the athlon burnk7 is designed to use 100% of the entire core in athlons

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)