wtb

tong · 05-13-2005, 01:22 AM

looking for a northbridge water block and a dc waterpump. Funds will be paypal. the fittings on both must be 3/8 to combine with my other blocks. will even take a Do It Yourself block if it looks good. Thanks guys. If i get this i can finaly go water YAY. oh a cylindrical reservoir (temporary till i get my bulelt casing in) too. looking to spend about 70 to 80 bux US.

jman1310 · 05-13-2005, 02:06 AM

i can make a custom cylindrical res for you
it can be as long a 2' (wouldn't go less than 3") and will be made of 1.75" ID acylic tube
i used a 3/4 fitting and a 1/2 fitting and a 3/4 fill port on top
i might have to buy a new tap to cut threads for 3/8 - i will have to check
$40 for the res
in the 2nd photo, you can see the devider between the in and out which speeds the bleeding process
i also have a polar flow NB block (anodized AL) you can have this if you buy the res

tong · 05-13-2005, 10:15 AM

we will defenately talk. short on time right now bu i'll hit u up

Delirious · 05-13-2005, 11:37 AM

I have the the danger den z-chip nb block just sitting around, never really used it. Its setup for a p4 board.

tong · 05-13-2005, 01:28 PM

oh nice the z one, can it be setup for an nforce chipset? That's a nice block.

Ok jman1310, any chance of having one made with like a 2 1/4 to 3 inch id? fill port on top and the two lines on the side? would have to be a total of like 6 to 8 inches tall. Thanks

Delirious · 05-13-2005, 09:30 PM

It the first chipset block danger den made. You would probably have to call them for a replacement top that would work with it. In the end u would be better getting the newer maze4 chipset block. IMHO i think water cooling the nb is a waste of time. Your better of with the swiftech hs.

tong · 05-15-2005, 01:01 PM

jman1310 hit me up, contact info in my profile. Thanks man.

tong · 05-22-2005, 12:11 PM

Ok. found the pump used mcp-600 and made a reservoir--which was neet to do.... still need a nb cooler got about $20 bux left so

/me gets down on knees and cries like a little school girl

pls somone have a nb chipset block for an amd nforce 2 chipset with 3/8 fittings PLS

Vertigo Acid · 05-22-2005, 08:32 PM

I've got the AMD top for a Z-chip for sale in my thread, $10 shipped, LMK if you're interested, pizowned@gmail.com. BTW you can't get them from DD anymore, not listed on their store, I had a helluva time getting the intel top for mine.

05-13-2005, 01:22 AM	#1
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	wtb looking for a northbridge water block and a dc waterpump. Funds will be paypal. the fittings on both must be 3/8 to combine with my other blocks. will even take a Do It Yourself block if it looks good. Thanks guys. If i get this i can finaly go water YAY. oh a cylindrical reservoir (temporary till i get my bulelt casing in) too. looking to spend about 70 to 80 bux US. __________________ My Heatware My Ebay

05-13-2005, 10:15 AM	#3
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	we will defenately talk. short on time right now bu i'll hit u up __________________ My Heatware My Ebay

05-13-2005, 01:28 PM	#5
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	oh nice the z one, can it be setup for an nforce chipset? That's a nice block. Ok jman1310, any chance of having one made with like a 2 1/4 to 3 inch id? fill port on top and the two lines on the side? would have to be a total of like 6 to 8 inches tall. Thanks __________________ My Heatware My Ebay

05-15-2005, 01:01 PM	#7
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	jman1310 hit me up, contact info in my profile. Thanks man. __________________ My Heatware My Ebay

05-22-2005, 12:11 PM	#8
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	Ok. found the pump used mcp-600 and made a reservoir--which was neet to do.... still need a nb cooler got about $20 bux left so /me gets down on knees and cries like a little school girl pls somone have a nb chipset block for an amd nforce 2 chipset with 3/8 fittings PLS __________________ My Heatware My Ebay

05-13-2005, 11:37 AM	#4
Delirious Cooling Savant Join Date: Oct 2004 Location: Twilight Zone Posts: 152	I have the the danger den z-chip nb block just sitting around, never really used it. Its setup for a p4 board.

05-13-2005, 09:30 PM	#6
Delirious Cooling Savant Join Date: Oct 2004 Location: Twilight Zone Posts: 152	It the first chipset block danger den made. You would probably have to call them for a replacement top that would work with it. In the end u would be better getting the newer maze4 chipset block. IMHO i think water cooling the nb is a waste of time. Your better of with the swiftech hs.

05-22-2005, 08:32 PM	#9
Vertigo Acid Cooling Neophyte Join Date: Apr 2005 Location: Vantucky, WA Posts: 9	I've got the AMD top for a Z-chip for sale in my thread, $10 shipped, LMK if you're interested, pizowned@gmail.com. BTW you can't get them from DD anymore, not listed on their store, I had a helluva time getting the intel top for mine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)