What do u thik about this setup

safrout · 03-09-2006, 09:00 AM

i am planning to go W/Cing soon, so after lots fo searching and reading i narrowed the list to those stuff

[1] Rad == Danger Den Double Heatercore OR Swiftech MCR220
planning to install 4 x120mm fans with ~60cfm

[2] Pump == ehiem 1250
http://www.xcsystems.nl/product_info...roducts_id=365

[3] liquid == Swiftech HydrX anti-corrosie/alg UV Groen ==> as said i may not need it anyway
http://www.xcsystems.nl/product_info...products_id=85

[4] VGa Block == Swiftech MCW60
http://www.newegg.com/Product/Produc...82E16835108077

[5] CPU block == i don't know if i should get the APOGEE or the TDX
since i am not sure i can buy the storm cause of availablity issue

so i need ur help to figure out which will be better the TDX or the APOGEE or even the old 6002 block from swiftech ???

also i am planning to use a T bard instead of a Res. and for sure 1/2" fittings

mx · 03-09-2006, 10:21 AM

I suggest that you post this thread over at XS or [H]. It wont get much respons here.

[1] I'd go for a ThermoChill PA160 instead.

[2] I recommend that you buy a DDC-Ultra, Laing D5 or AquaXtrene 50Z instead of the eheim pump. It's big, ugly and runs on AC. For that price you could get a much better pump.

[3] I like Zerex but with only Cu in the loop it doesn't realy matter. (And your link doesn't work.)

[4] The newegg ling don't work but I suggest that you buy the one with ramsinks.

[5] I'd choose Apogee over TDX. But try to get a storm or maybe an Aquaextreme MP-05.

I Prefer t-line with fillport over res. And DD 1/2" PerfectSeal fittings are nice.

Brians256 · 03-09-2006, 04:23 PM

mx has made good suggestions.

03-09-2006, 09:00 AM	#1
safrout Cooling Neophyte Join Date: Dec 2004 Location: Egypt Posts: 15	What do u thik about this setup i am planning to go W/Cing soon, so after lots fo searching and reading i narrowed the list to those stuff [1] Rad == Danger Den Double Heatercore OR Swiftech MCR220 planning to install 4 x120mm fans with ~60cfm [2] Pump == ehiem 1250 http://www.xcsystems.nl/product_info...roducts_id=365 [3] liquid == Swiftech HydrX anti-corrosie/alg UV Groen ==> as said i may not need it anyway http://www.xcsystems.nl/product_info...products_id=85 [4] VGa Block == Swiftech MCW60 http://www.newegg.com/Product/Produc...82E16835108077 [5] CPU block == i don't know if i should get the APOGEE or the TDX since i am not sure i can buy the storm cause of availablity issue so i need ur help to figure out which will be better the TDX or the APOGEE or even the old 6002 block from swiftech ??? also i am planning to use a T bard instead of a Res. and for sure 1/2" fittings

03-09-2006, 10:21 AM	#2
mx Cooling Neophyte Join Date: Oct 2005 Location: Sweden Posts: 73	Re: What do u thik about this setup I suggest that you post this thread over at XS or [H]. It wont get much respons here. [1] I'd go for a ThermoChill PA160 instead. [2] I recommend that you buy a DDC-Ultra, Laing D5 or AquaXtrene 50Z instead of the eheim pump. It's big, ugly and runs on AC. For that price you could get a much better pump. [3] I like Zerex but with only Cu in the loop it doesn't realy matter. (And your link doesn't work.) [4] The newegg ling don't work but I suggest that you buy the one with ramsinks. [5] I'd choose Apogee over TDX. But try to get a storm or maybe an Aquaextreme MP-05. I Prefer t-line with fillport over res. And DD 1/2" PerfectSeal fittings are nice.

03-09-2006, 04:23 PM	#3
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: What do u thik about this setup mx has made good suggestions.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)