Innovaradiator Connections Mod?

crotale · 11-26-2002, 11:19 AM

Is there any way to mod the Innovarad Dual 120
Radiator to 1/2"?
Is the radiator capable of 1/2"? Flowresistance?

g.l.amour · 11-26-2002, 12:42 PM

don't know alot of ppl using that rad here. i know of someone modding his innovatech WB to 1/2.

gmat · 11-26-2002, 04:28 PM

pH is the innovatek man here...

crotale · 11-26-2002, 05:04 PM

.

MadDogMe · 11-27-2002, 04:12 AM

I *think* they will take a 12mm~1/2' sized barb/fitting, but I *think* they have a weird 'NTP' or some~such Metric thread...

crotale · 11-27-2002, 05:22 AM

ok, if it is metric, it's good, because I live in europe...

I'm asking because if innovatek made this rad themself,
and they only use 1/4" in their systems, maybe they
went the cheap way and made a rad with 1/4" from
the beginning...

MadDogMe: Do you have any experiance with these
rads?

MadDogMe · 11-27-2002, 09:21 AM

Nope!, I just remember a previous discussion. do they give the specs' on Innovateks site?, I'd try e~mailing them if no~one can help here...

bytesyzed · 11-27-2002, 10:20 AM

I think they use BST threads (British), not metric.

11-26-2002, 11:19 AM	#1
crotale Cooling Neophyte Join Date: Nov 2002 Location: Sweden Posts: 13	Innovaradiator Connections Mod? Is there any way to mod the Innovarad Dual 120 Radiator to 1/2"? Is the radiator capable of 1/2"? Flowresistance?

11-26-2002, 12:42 PM	#2
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	don't know alot of ppl using that rad here. i know of someone modding his innovatech WB to 1/2. __________________ yo soy un tiburón

11-26-2002, 05:04 PM	#4
crotale Cooling Neophyte Join Date: Nov 2002 Location: Sweden Posts: 13	. Last edited by crotale; 11-26-2002 at 05:19 PM.

11-26-2002, 04:28 PM	#3
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	pH is the innovatek man here...

11-27-2002, 04:12 AM	#5
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	I think they will take a 12mm~1/2' sized barb/fitting, but I think they have a weird 'NTP' or some~such Metric thread...

11-27-2002, 05:22 AM	#6
crotale Cooling Neophyte Join Date: Nov 2002 Location: Sweden Posts: 13	ok, if it is metric, it's good, because I live in europe... I'm asking because if innovatek made this rad themself, and they only use 1/4" in their systems, maybe they went the cheap way and made a rad with 1/4" from the beginning... MadDogMe: Do you have any experiance with these rads?

11-27-2002, 09:21 AM	#7
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	Nope!, I just remember a previous discussion. do they give the specs' on Innovateks site?, I'd try e~mailing them if no~one can help here...

11-27-2002, 10:20 AM	#8
bytesyzed Cooling Neophyte Join Date: Nov 2002 Location: Hell's Kitchen Posts: 23	I think they use BST threads (British), not metric.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)