Radiator Suggestions

Delirious · 10-11-2004, 07:34 PM

Im using this case with two BIX's in series, and was wondering 2 of these would perform better. Im using the Storm and a polarflo gpu block, with a eheim 1250 and 1/2 tubing Im in a basement too so ambient temps never exceed 70 F.

The Dark Hacker · 10-11-2004, 09:24 PM

why not just get a thermochill 120.3 and put it in the front of the case. and ya the d-tek heatercores will perform better

also ever though of getting a more powerful pump like 2 danger den d4 in series or a iwaki. the storm will really shine with a high power pump

Delirious · 10-12-2004, 12:19 AM

well the iwaki's and 2xd4's are kinda expensive, getting new radiators will only cost $80 for two of them, plus im goin to sell the BIX's.

I no longer use the top most 120mm fan hole on that case for a fan, my matrix orbital mx5 no occupies that space. So the thermochill is out of the question, but would it perform better than the two pro cores?

Is the benefit goin to be that much more noticeable?

redleader · 10-12-2004, 01:26 AM

Upgradeing the radiators seems pretty pointless. I dount your coolant is more then a few degrees above ambient unless you have some seriously weak fans. Even then you'd still be scapeing the bottom of the barrel . . .

Flow would be a better place to look. Bigger pump, or less restrictive loop (rads in parallel for instance). Maybe wait for pH's storm review and see what a big pump can do with a block like that before you make up your mind.

Delirious · 10-12-2004, 10:31 AM

I thought radiators in series were better. Not totally sure what a parallel loop would look like. A new pump would be nice i just cant affor and iwaki, the high head models are $169.00 Ouch

10-11-2004, 07:34 PM	#1
Delirious Cooling Savant Join Date: Oct 2004 Location: Twilight Zone Posts: 152	Radiator Suggestions Im using this case with two BIX's in series, and was wondering 2 of these would perform better. Im using the Storm and a polarflo gpu block, with a eheim 1250 and 1/2 tubing Im in a basement too so ambient temps never exceed 70 F. Last edited by Delirious; 10-11-2004 at 07:43 PM.

10-11-2004, 09:24 PM	#2
The Dark Hacker Cooling Neophyte Join Date: Aug 2004 Location: Fort Worth, Texas Posts: 24	why not just get a thermochill 120.3 and put it in the front of the case. and ya the d-tek heatercores will perform better also ever though of getting a more powerful pump like 2 danger den d4 in series or a iwaki. the storm will really shine with a high power pump

10-12-2004, 12:19 AM	#3
Delirious Cooling Savant Join Date: Oct 2004 Location: Twilight Zone Posts: 152	well the iwaki's and 2xd4's are kinda expensive, getting new radiators will only cost $80 for two of them, plus im goin to sell the BIX's. I no longer use the top most 120mm fan hole on that case for a fan, my matrix orbital mx5 no occupies that space. So the thermochill is out of the question, but would it perform better than the two pro cores? Is the benefit goin to be that much more noticeable?

10-12-2004, 01:26 AM	#4
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	Upgradeing the radiators seems pretty pointless. I dount your coolant is more then a few degrees above ambient unless you have some seriously weak fans. Even then you'd still be scapeing the bottom of the barrel . . . Flow would be a better place to look. Bigger pump, or less restrictive loop (rads in parallel for instance). Maybe wait for pH's storm review and see what a big pump can do with a block like that before you make up your mind.

10-12-2004, 10:31 AM	#5
Delirious Cooling Savant Join Date: Oct 2004 Location: Twilight Zone Posts: 152	I thought radiators in series were better. Not totally sure what a parallel loop would look like. A new pump would be nice i just cant affor and iwaki, the high head models are $169.00 Ouch

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)