Online Database for Heatercores - Page 6

bigben2k · 03-21-2006, 04:30 PM

Bob finished uploading all his files:
http://wbta.us/heatercore_database/

Does anyone want to tackle organizing them, and making pages?

bobkoure · 03-22-2006, 11:59 AM

I suspect that, given the current state of made-for-pc-cooling radiators (IMHO very good) there will only be a few folks interested - and those are likely to be fairly hardcore - so maybe just leave it like that, if someone's really interested they'll probably want everything anyway.

All that said, the one HC/shroud combination I prefer is the mercury montego core with a Coolingworks shroud. The shroud makes mounting the combo no harder than a made-for-pc radiator. And the montego core has 1/2" inlet and outlet pipes. They angle a bit, but all you have to do is cut 'em off and smooth off the cut (no soldering or plumbers goop, no ugly 3/4" to 1/2" adapter). I've used 'em with 3/8" ID soft silicone hose, with no problem.

Hmmm... I just did a search for the Coolingworks "chevette" shroud. It doesn't look like any merchants are carrying this. Erik or Bill - got somewhere to point folks at for these? Or has this been discontinued? I bought a few extra the last time I was in a spate of PC building so it's been some while since I looked 'em up...

mrastudent · 03-23-2006, 10:42 AM

Hey guys thanks for the spreadsheets and images, but I wound up buying another 2-302 anyway. I wanted something .5-1 inch shorter, but I will make do with this core because it's so cheap and I know mounting fans to it is a cinch.

bigben2k · 03-24-2006, 05:18 PM

Created thumbnails pages:

Fedco:
http://wbta.us/heatercore_database/fedco/

Stant:
http://wbta.us/heatercore_database/stant/

Transpro-GDI:
http://wbta.us/heatercore_database/transpro-GDI/

Gonna try to create a main index page but in the mean time:
http://wbta.us/heatercore_database/

bigben2k · 03-24-2006, 08:45 PM

All done.
http://wbta.us/heatercore_database/

I'm going to go ahead and merge this thread with the sticky for the HC db.

bobkoure · 03-24-2006, 10:31 PM

Cool!
All this work and air-cooled - so why not actually build a system? You could become "the theoretical heatpipe cooler" or some such...

bigben2k · 03-24-2006, 10:52 PM

I'm working on it, along with a SUSE linux server, SUSE linux workstation, the block testbench (am plumbing the loop now), and the wind tunnel.

I'm off this weekend and Tuesday: hopefully I'll get a few things done.

Right now I'm hoping to get the GPIB controller running, and hooking up some of my instruments (two multimeters, a relay switcher, and a GPIB analyzer) to it. I might have to use the Linux station for that, if I can get it together.

03-21-2006, 04:30 PM	#126
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: The "Heater Core Cross Reference" is down, any alternatives? Bob finished uploading all his files: http://wbta.us/heatercore_database/ Does anyone want to tackle organizing them, and making pages? __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-22-2006, 11:59 AM	#127
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	Re: The "Heater Core Cross Reference" is down, any alternatives? I suspect that, given the current state of made-for-pc-cooling radiators (IMHO very good) there will only be a few folks interested - and those are likely to be fairly hardcore - so maybe just leave it like that, if someone's really interested they'll probably want everything anyway. All that said, the one HC/shroud combination I prefer is the mercury montego core with a Coolingworks shroud. The shroud makes mounting the combo no harder than a made-for-pc radiator. And the montego core has 1/2" inlet and outlet pipes. They angle a bit, but all you have to do is cut 'em off and smooth off the cut (no soldering or plumbers goop, no ugly 3/4" to 1/2" adapter). I've used 'em with 3/8" ID soft silicone hose, with no problem. Hmmm... I just did a search for the Coolingworks "chevette" shroud. It doesn't look like any merchants are carrying this. Erik or Bill - got somewhere to point folks at for these? Or has this been discontinued? I bought a few extra the last time I was in a spate of PC building so it's been some while since I looked 'em up... Last edited by bobkoure; 07-24-2007 at 02:18 PM.

03-23-2006, 10:42 AM	#128
mrastudent Cooling Neophyte Join Date: Apr 2004 Location: San Diego Posts: 8	Re: The "Heater Core Cross Reference" is down, any alternatives? Hey guys thanks for the spreadsheets and images, but I wound up buying another 2-302 anyway. I wanted something .5-1 inch shorter, but I will make do with this core because it's so cheap and I know mounting fans to it is a cinch.

03-24-2006, 05:18 PM	#129
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: The "Heater Core Cross Reference" is down, any alternatives? Created thumbnails pages: Fedco: http://wbta.us/heatercore_database/fedco/ Stant: http://wbta.us/heatercore_database/stant/ Transpro-GDI: http://wbta.us/heatercore_database/transpro-GDI/ Gonna try to create a main index page but in the mean time: http://wbta.us/heatercore_database/ __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-24-2006, 08:45 PM	#130
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: The "Heater Core Cross Reference" is down, any alternatives? All done. http://wbta.us/heatercore_database/ I'm going to go ahead and merge this thread with the sticky for the HC db. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

03-24-2006, 10:31 PM	#131
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	Re: Online Database for Heatercores Cool! All this work and air-cooled - so why not actually build a system? You could become "the theoretical heatpipe cooler" or some such...

03-24-2006, 10:52 PM	#132
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: Online Database for Heatercores I'm working on it, along with a SUSE linux server, SUSE linux workstation, the block testbench (am plumbing the loop now), and the wind tunnel. I'm off this weekend and Tuesday: hopefully I'll get a few things done. Right now I'm hoping to get the GPIB controller running, and hooking up some of my instruments (two multimeters, a relay switcher, and a GPIB analyzer) to it. I might have to use the Linux station for that, if I can get it together. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)