USB watch drive problem

zachjowi · 10-15-2006, 01:48 PM

I bought a 256MB Edge brand watch/flash drive a while back and the part the connects the usb wire to the wach has come unsoldered. I know where to connect them and there are four wires for the usb part. The colors are Green, white, black, and white. I am not sure of what wire goes to what pin on the flash memory board.

http://www.edgetechcorp.com/usb-flas...mbos-watch.asp

here are some pics

flip side

bigben2k · 10-15-2006, 03:42 PM

I also have a watch, very much like that one. The USB cable replacement/repair guide is available here:
http://www.xonixwatch.com/en/faq/MP%...20plug(en).doc
(MS Word document, 492 kb)

Hope it helps.

10-15-2006, 01:48 PM	#1
zachjowi Cooling Savant Join Date: May 2005 Location: US Posts: 123	USB watch drive problem I bought a 256MB Edge brand watch/flash drive a while back and the part the connects the usb wire to the wach has come unsoldered. I know where to connect them and there are four wires for the usb part. The colors are Green, white, black, and white. I am not sure of what wire goes to what pin on the flash memory board. http://www.edgetechcorp.com/usb-flas...mbos-watch.asp here are some pics flip side __________________ Intel is the way to go. Last edited by zachjowi; 10-15-2006 at 02:35 PM.

10-15-2006, 03:42 PM	#2
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: USB watch drive problem I also have a watch, very much like that one. The USB cable replacement/repair guide is available here: http://www.xonixwatch.com/en/faq/MP%...20plug(en).doc (MS Word document, 492 kb) Hope it helps. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)