Mounting hole distances for CPUs - Page 5

p0stman · 04-25-2006, 04:15 AM

Somebody have schemes or distances of the new graphic cards? (ATI x1800/x1900, GF 7800...)
Thanks.

Hande · 06-04-2006, 03:37 AM

does anybody have x1900XTX, x1900CFE and x3200 chipset dimensions

-Hande-

n00b 0f l337 · 06-18-2006, 07:26 PM

^^ Bump

davidzo · 06-19-2006, 03:59 PM

so just take a caliper and measure it on your graphics card.

Hint:
xpress 3200 has different mobovendors and they use different mounting holes. some like asus use the 54.8mm standard holes, some others like ECS and co. biult their boards with standard 58mm holes. but when you plan to watercool your xpress chipset, just give up, it isn't necessary. even with integrated x300 graphics the chipset doesn't even get hot while playing intense games like cmr2005, bf42, SSCT or GTASA. Its not an nvidia nforce4 which is three times as hot. it will stay fine and silent even with the standard passive heatsink even with overclocking.

For the X1800/X1900 series which share the same pcb layout, the diestances are exactly the same as on 6800/7800/7900 series. But 6800/7800/7900 only have very small 2.2mm holes while the x1800 holes measure at least 3.2mm. The distances are 53.5mm*53.5mm measured from the middle of the holes.

p0stman · 06-20-2006, 09:26 AM

Quote:

Originally Posted by davidzo

so just take a caliper and measure it on your graphics card.

Hint:
xpress 3200 has different mobovendors and they use different mounting holes. some like asus use the 54.8mm standard holes, some others like ECS and co. biult their boards with standard 58mm holes. but when you plan to watercool your xpress chipset, just give up, it isn't necessary. even with integrated x300 graphics the chipset doesn't even get hot while playing intense games like cmr2005, bf42, SSCT or GTASA. Its not an nvidia nforce4 which is three times as hot. it will stay fine and silent even with the standard passive heatsink even with overclocking.

For the X1800/X1900 series which share the same pcb layout, the diestances are exactly the same as on 6800/7800/7900 series. But 6800/7800/7900 only have very small 2.2mm holes while the x1800 holes measure at least 3.2mm. The distances are 53.5mm*53.5mm measured from the middle of the holes.

Thank you!

Hande · 06-20-2006, 03:00 PM

Quote:

Originally Posted by p0stman

Thank you!

very friendly thank you. what about position of rams. im planing to make one piece block.

davidzo · 06-20-2006, 04:22 PM

there are ramblocks of 3 bgamodules each at the top and the right approxximately 15mm from the 53*53mm. these blocks measure 55*12mm. their middle is not aligned to the middle of the core. the top ramblock is 3mm more on the left, the right ramblock is 5mm to the bottom. additionally there are two 45° rotated rams at the top of the card to the left and right of the upper bgaramblock. the left one is a little bit lower than the right one.

i am too lazy to make a sketch right now. another thing that hinders me is that i have a small commercial shop in germany for waterblocks, so homebuilt blocks are not directly good for my business. I like homebuilt blocks because mine aren't so different either (cnc-milled but handpolished, blastet, mounted in very small series) but i don't give copies of my plans away for free before i released my waterblock based on these drawings which i measured and made myself

my advice: take a good highres scan of a x1800xt card if you have none to measure with a caliper and scale it to the right 53.5mm between the holes on the screen ans measure there. the accuracy isn't enough for the positions of the holes but its good to see where the rams sits +-1mm. x1900 is the same:
http://www.ixbt.com/video2/images/re...scan-front.jpg
http://www.ixbt.com/video2/images/re...-scan-back.jpg

Captain Slug · 07-31-2006, 06:19 AM

I made this a month or so ago in order to consolidate metric and imperial into one template image. This gives center-to-hole distances which are more useful for machining.
http://www.captainslug.com/modding/mh.gif

Covers sockets 462, 463, 478, LGA775, and 939

majstro · 11-16-2006, 02:57 PM

Hi I need to have the mesurement for AM2 anyone have these

// Micke

majstro · 12-09-2006, 04:01 AM

Can anyone confirm these messurements 96*48mm betwen the mountingholes for AM2

//Micke

mwolfman · 02-20-2007, 08:05 AM

Have anyone seen the blueprint for the 8800 GTS/GTX?
Dont like the blocks that are out so Il figure I do my own...

Oh, and Its time to update my system specs... Got a new pump (L-Ultra) and a NGBig...

davis5 · 04-07-2007, 07:42 AM

does anyone know mounting holes for gigabite 965p ds3 chipset?

JAxen · 01-18-2008, 07:11 AM

Any1 knows the S775 mountings?

Roscal · 01-18-2008, 07:27 AM

A 72 mm square

derelict · 03-17-2008, 09:27 PM

Quote:

Originally Posted by Captain Slug

http://www.captainslug.com/modding/mh.gif

Covers sockets 462, 463, 478, LGA775, and 939

Thanks

mwolfman · 06-29-2008, 04:24 PM

Quote:

Originally Posted by Captain Slug

I made this a month or so ago in order to consolidate metric and imperial into one template image. This gives center-to-hole distances which are more useful for machining.
http://www.captainslug.com/modding/mh.gif

Covers sockets 462, 463, 478, LGA775, and 939

Thanx! Just what I needed!

sejutaluka · 11-22-2009, 09:18 AM

does anyone know mounting holes for AM2 ?

04-25-2006, 04:15 AM	#101
p0stman Registered User Join Date: Feb 2003 Location: undergroundcooling.tk Posts: 15	Re: Mounting hole distances for CPUs Somebody have schemes or distances of the new graphic cards? (ATI x1800/x1900, GF 7800...) Thanks.

06-04-2006, 03:37 AM	#102
Hande Cooling Neophyte Join Date: Nov 2004 Location: Viiala Posts: 4	Re: Mounting hole distances for CPUs does anybody have x1900XTX, x1900CFE and x3200 chipset dimensions -Hande- Last edited by Hande; 06-11-2006 at 04:59 AM.

06-18-2006, 07:26 PM	#103
n00b 0f l337 Cooling Neophyte Join Date: Jun 2005 Location: New Jersey Posts: 38	Re: Mounting hole distances for CPUs ^^ Bump __________________ http://img134.imageshack.us/img134/8558/nol9xq.png

06-19-2006, 03:59 PM	#104
davidzo Cooling Savant Join Date: Mar 2003 Location: Hamburg Posts: 141	Re: Mounting hole distances for CPUs so just take a caliper and measure it on your graphics card. Hint: xpress 3200 has different mobovendors and they use different mounting holes. some like asus use the 54.8mm standard holes, some others like ECS and co. biult their boards with standard 58mm holes. but when you plan to watercool your xpress chipset, just give up, it isn't necessary. even with integrated x300 graphics the chipset doesn't even get hot while playing intense games like cmr2005, bf42, SSCT or GTASA. Its not an nvidia nforce4 which is three times as hot. it will stay fine and silent even with the standard passive heatsink even with overclocking. For the X1800/X1900 series which share the same pcb layout, the diestances are exactly the same as on 6800/7800/7900 series. But 6800/7800/7900 only have very small 2.2mm holes while the x1800 holes measure at least 3.2mm. The distances are 53.5mm*53.5mm measured from the middle of the holes.

06-20-2006, 04:22 PM	#107
davidzo Cooling Savant Join Date: Mar 2003 Location: Hamburg Posts: 141	Re: Mounting hole distances for CPUs there are ramblocks of 3 bgamodules each at the top and the right approxximately 15mm from the 5353mm. these blocks measure 5512mm. their middle is not aligned to the middle of the core. the top ramblock is 3mm more on the left, the right ramblock is 5mm to the bottom. additionally there are two 45° rotated rams at the top of the card to the left and right of the upper bgaramblock. the left one is a little bit lower than the right one. i am too lazy to make a sketch right now. another thing that hinders me is that i have a small commercial shop in germany for waterblocks, so homebuilt blocks are not directly good for my business. I like homebuilt blocks because mine aren't so different either (cnc-milled but handpolished, blastet, mounted in very small series) but i don't give copies of my plans away for free before i released my waterblock based on these drawings which i measured and made myself my advice: take a good highres scan of a x1800xt card if you have none to measure with a caliper and scale it to the right 53.5mm between the holes on the screen ans measure there. the accuracy isn't enough for the positions of the holes but its good to see where the rams sits +-1mm. x1900 is the same: http://www.ixbt.com/video2/images/re...scan-front.jpg http://www.ixbt.com/video2/images/re...-scan-back.jpg Last edited by davidzo; 06-20-2006 at 04:31 PM.

07-31-2006, 06:19 AM	#108
Captain Slug Cooling Savant Join Date: Jan 2006 Location: VA Posts: 129	Re: Mounting hole distances for CPUs I made this a month or so ago in order to consolidate metric and imperial into one template image. This gives center-to-hole distances which are more useful for machining. http://www.captainslug.com/modding/mh.gif Covers sockets 462, 463, 478, LGA775, and 939

11-16-2006, 02:57 PM	#109
majstro Cooling Neophyte Join Date: Nov 2006 Location: Sweden Posts: 2	Re: Mounting hole distances for CPUs Hi I need to have the mesurement for AM2 anyone have these // Micke Last edited by majstro; 11-16-2006 at 05:35 PM.

12-09-2006, 04:01 AM	#110
majstro Cooling Neophyte Join Date: Nov 2006 Location: Sweden Posts: 2	Re: Mounting hole distances for CPUs Can anyone confirm these messurements 96*48mm betwen the mountingholes for AM2 //Micke

02-20-2007, 08:05 AM	#111
mwolfman Cooling Savant Join Date: Jun 2004 Location: Sweden Posts: 152	Re: Mounting hole distances for CPUs Have anyone seen the blueprint for the 8800 GTS/GTX? Dont like the blocks that are out so Il figure I do my own... Oh, and Its time to update my system specs... Got a new pump (L-Ultra) and a NGBig... __________________ Very old specs below, but I keep it for sentimental values :-/ Gigabyte GA-7N400 Pro2, Barton 2500@3200 -11201MHz, X800 XL , 1 GB Cosair 3200 (6-2-2-2) @400MHz in dual channel TurboBlock Rev. 1.0~0,15452756±0,004125251°C/W , HL120.3* with 3 Papst 4412@7volt , Hydor L30II

04-07-2007, 07:42 AM	#112
davis5 Cooling Neophyte Join Date: Jul 2006 Location: israel Posts: 9	Re: Mounting hole distances for CPUs does anyone know mounting holes for gigabite 965p ds3 chipset?

01-18-2008, 07:11 AM	#113
JAxen Cooling Neophyte Join Date: Dec 2005 Location: Sweden Posts: 38	Re: Mounting hole distances for CPUs Any1 knows the S775 mountings?

01-18-2008, 07:27 AM	#114
Roscal Cooling Savant Join Date: Apr 2002 Location: North of France Posts: 198	Re: Mounting hole distances for CPUs A 72 mm square

11-22-2009, 09:18 AM	#117
sejutaluka Cooling Neophyte Join Date: Oct 2009 Location: zimbabwe Posts: 1	Re: Mounting hole distances for CPUs does anyone know mounting holes for AM2 ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)