|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
Thread Tools |
09-28-2012, 03:38 PM | #1 |
Cooling Neophyte
Join Date: Mar 2004
Location: Ozz
Posts: 4
|
Snap 410 possible failed Motherboard
Hello all!
I need some help. I have a 410 with 4 250gb drives in a Raid 5. One day it spontaneously rebooted. I checked the logs and found no errors. Raid was fine and did not rebuild. 24 hours later, it rebooted again. I checked the logs and found no errors, Raid still showed green and did not rebuild. An hour later it froze and stayed that way for 2 hours till I cycled the power. Now I have a green power light, amber status light, and slots 2 and 4 have amber status lights. I powered down and removed all the drives, labeling each one a with slot number. I powered back on, and still have an amber status light, and slots 2 and 4 are still amber. I assume the the raid chip has died. I have about 70% of the data backed up, but would like to recover the remaining 30%. Can I move the drives to another 410? I can get a used one off Ebay. What other options do I have? Thanks! |
09-29-2012, 12:20 PM | #2 | |
Cooling Neophyte
Join Date: Jul 2011
Location: Yoo Kay
Posts: 28
|
Re: Snap 410 possible failed Motherboard
Quote:
They grumble a bit because of server numbers not matching etc but usually after a couple of re-boots and the like they usually settle down. Look at it this way, if there is no better solution offered here then you have nothing to loose because your data is lost anyway. I would wait a while first incase there are some proper solutions offered here. Regarding the failure in the first place, it could be something simple such as failed RAM or bad connections, dirty contacts etc. I think, if you can get hold of a second 410 for a reasonable price then it gives you some options for parts swapping or to replace the faulty unit with later on. The most important thing is the safety of your data, so think wisely first before acting. Ofcourse there are recovery specialists who can recover data from snap servers and raid sets but they are usually very expensive. In the order of thousands not hundreds of bucks. How much is the data worth i guess you have to ask yourself. Sorry to be of so little help, hopefully others may be able to add more? |
|
09-30-2012, 12:55 PM | #3 |
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
Re: Snap 410 possible failed Motherboard
You are joking right? Being able to and doing are two different things around here it seems.
You are sure a lot more optimistic than I am about that.
__________________
~ 6 x Snap 4400 (SATA Converted) 2 x Snap 4500 (SATA Converted) 1 x Snap 110 5 x Snap 410 3 x Snap 520 2 x Sanbloc S50 Drives from 250GB to 2TB (PATA, SATA, and SAS) GOS v5.2.067 All subject to change, day by day...... |
09-30-2012, 01:00 PM | #4 |
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
Re: Snap 410 possible failed Motherboard
Pendarus, you joined 2 years before me, and yet you only have 2 posts. Why should I bother to help you? I see it as a waste of my time to help those who are self centered and won't participate beyond helping themselves.
And BTW, yes, there is an answer to your question and a specific way it has to be done to be sure to save the data. I sure hope one of your other fellow lurkers knows how and steps forward with the information for you. Good luck with that!
__________________
~ 6 x Snap 4400 (SATA Converted) 2 x Snap 4500 (SATA Converted) 1 x Snap 110 5 x Snap 410 3 x Snap 520 2 x Sanbloc S50 Drives from 250GB to 2TB (PATA, SATA, and SAS) GOS v5.2.067 All subject to change, day by day...... |
10-01-2012, 11:15 AM | #5 | |
Cooling Neophyte
Join Date: Mar 2004
Location: Ozz
Posts: 4
|
Re: Snap 410 possible failed Motherboard
Quote:
Considering that my first post was to help someone with a question, and that I was the only person that attempted to help them, I would hope I could get a question answered in return. By the way, I don't lurk here. I found this forum years ago when I bought my first Snap. I wasn't into hacking Snaps so I didn't have anything helpful to add. I answered one question and moved on. |
|
10-03-2012, 11:19 AM | #6 | |
Cooling Neophyte
Join Date: Mar 2004
Location: Ozz
Posts: 4
|
Re: Snap 410 possible failed Motherboard
Quote:
I will doing some more research before I attempt moving the drives. I have a used 410 on the way, should be here on Monday. |
|
10-03-2012, 06:28 PM | #7 | |
Cooling Neophyte
Join Date: Jul 2011
Location: Yoo Kay
Posts: 28
|
Re: Snap 410 possible failed Motherboard
Quote:
I think though that a second unit is always usefull particularly in situations like this so hopefully it will work out ok for you. Goodluck. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|