1.4 Ghz Athlon T-Bird - Needs a Heatsink

bkeating · 04-08-2002, 01:14 AM

Hello,

I recently purchased a 1.4 ghz Athlon T-bird and don't have the time for water-coolng. whats a decent heatsink/fan combo that would run this processor safely?

Thanks

Ben!

Brad · 04-08-2002, 04:11 AM

as I said in the other forum, pal8045 if you have the room, volcano 7+ if you don't

mkosem · 04-08-2002, 05:13 AM

if you get the volcano, you may wanna invest in a new fan. per cfm, that fan seems prety loud.

--Matt

res0r9lm · 06-17-2002, 06:38 PM

I had good results with a swiftech mcxc 370 just use a high cfm fan.

04-08-2002, 01:14 AM	#1
bkeating Cooling Neophyte Join Date: Jan 2002 Location: Eagle, WI Posts: 21	1.4 Ghz Athlon T-Bird - Needs a Heatsink Hello, I recently purchased a 1.4 ghz Athlon T-bird and don't have the time for water-coolng. whats a decent heatsink/fan combo that would run this processor safely? Thanks Ben! __________________ Pentium 233 / Matrox 220 business / 128MB / 6gig Seagate / Garbaged picked Monitor (just had a bad cable!) uptime: 35 days and counting!

04-08-2002, 04:11 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	as I said in the other forum, pal8045 if you have the room, volcano 7+ if you don't __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-08-2002, 05:13 AM	#3
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	if you get the volcano, you may wanna invest in a new fan. per cfm, that fan seems prety loud. --Matt __________________ If you can't cool it, blow it up!! http://www.mattkosem.com

06-17-2002, 06:38 PM	#4
res0r9lm Cooling Neophyte Join Date: Mar 2002 Location: florida Posts: 25	I had good results with a swiftech mcxc 370 just use a high cfm fan.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)