|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
04-07-2002, 09:28 PM | #1 |
Cooling Neophyte
Join Date: Mar 2002
Location: Lehigh Acres , Florida
Posts: 41
|
Psu Testing
I think my PSU died .How would it be possible to check it out with a volt meter?
__________________
Learning is a step in the right direction for those willing to listen. http://www.cabmeister.com |
04-16-2002, 08:39 PM | #2 |
Cooling Savant
Join Date: Mar 2002
Location: Mississippi
Posts: 434
|
http://www.directron.com/directron/tester1.html ive used these in the past....works great
|
04-16-2002, 09:35 PM | #3 |
Cooling Neophyte
Join Date: Mar 2002
Location: Lehigh Acres , Florida
Posts: 41
|
Thanks Haddy . I was lucky enough to bump into an ATX connector
skematic and was able to test that way, everything checked out as it should .So I really don`t know what was going on but the PSU is fine again and re-mounted in the box.Slap me silly for forgetting to post , that i found a solution and I thank you for your time to help . Infact I will be getting hold of one of those testers , seems like a lot less hassle than sticking probes in every which way to get readings.
__________________
Learning is a step in the right direction for those willing to listen. http://www.cabmeister.com |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|