Made some changes to my wc'n setup *Pics*

TheWiz · 01-20-2003, 09:50 PM

After repositiong my rad and shortening the length of my tubing, my temps have dropped dramatically. Comments or critism welcome...

Before temps:

System: 30c
cpu idle: 42c
cpu load:46c

After temps:

System: 28c
cpu idle: 34c
cpu load:38c

Sorry 56kers

m3_arun · 01-20-2003, 11:35 PM

nice.. you know what... you could get a XLR or similar size rad an mount it on top... that might reduce temps more. looks awesome though. how did you get that window?

Pritorian · 01-21-2003, 06:37 AM

Looks real good.

But it looks like å pain to bleed and fill? who do you do that with it not taking a week, hehe....

btw what is the name of that HC? look real good.

-P-

TheWiz · 01-21-2003, 08:10 AM

Quote:

nice.. you know what... you could get a XLR or similar size rad an mount it on top... that might reduce temps more. looks awesome though. how did you get that window?

I would do this...but my pump is a ehiem 1048. It would struggle to get the water that high in the system.
The window was purchased. The whole case side comes pre windowed.

Quote:

But it looks like å pain to bleed and fill? who do you do that with it not taking a week, hehe....

If you look at the last pic....you can almost make out where my "fill/bleed" tube is..it was rather easy to fill. Took about 20 minutes to fill and about an hour to bleed.

Turbokeu · 01-21-2003, 08:17 AM

Nice work.
If I was you I would put a 1" or so shroud between each fan and the HC (should be enough room in your case to do that). Could lower your temps a couple more degrees...

CD

gmat · 01-21-2003, 08:25 AM

Good work, clean and all. A good example of "how it should be done". Shows people that watercooling is nice & easy.

The heatercore is the one sold by D-Tek, or at least it's the exact same model.
TheWiz: you're not using 100% of your heatercore yet. You'll benefit *a lot* from shrouding your fans. My bets go on a few °C down...

01-20-2003, 09:50 PM	#1
TheWiz Cooling Neophyte Join Date: Sep 2002 Location: Iowa Posts: 7	Made some changes to my wc'n setup Pics After repositiong my rad and shortening the length of my tubing, my temps have dropped dramatically. Comments or critism welcome... Before temps: System: 30c cpu idle: 42c cpu load:46c After temps: System: 28c cpu idle: 34c cpu load:38c Sorry 56kers

01-20-2003, 11:35 PM	#2
m3_arun Cooling Neophyte Join Date: Oct 2002 Location: san jose, ca Posts: 91	nice.. you know what... you could get a XLR or similar size rad an mount it on top... that might reduce temps more. looks awesome though. how did you get that window? __________________ AthlonXP 1800+ @ 135x11.5 Epox 8k5a2+ Antec SX830 case 256MB Micron PC2400 WC system soon... Iwaki MD-30RZ (getting fittings right now) Cathar WW block #102 (arrived) Heater core (still pondering) (still need to get tubing)

01-21-2003, 06:37 AM	#3
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Looks real good. But it looks like å pain to bleed and fill? who do you do that with it not taking a week, hehe.... btw what is the name of that HC? look real good. -P- __________________ Boo!

01-21-2003, 08:17 AM	#5
Turbokeu Cooling Savant Join Date: May 2001 Location: Brussels - Belgium Posts: 232	Nice work. If I was you I would put a 1" or so shroud between each fan and the HC (should be enough room in your case to do that). Could lower your temps a couple more degrees... CD __________________ My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be

01-21-2003, 08:25 AM	#6
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	Good work, clean and all. A good example of "how it should be done". Shows people that watercooling is nice & easy. The heatercore is the one sold by D-Tek, or at least it's the exact same model. TheWiz: you're not using 100% of your heatercore yet. You'll benefit a lot from shrouding your fans. My bets go on a few °C down...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)