lookin for Radiator with 1/2" or bigger inlets

ondaedg · 04-30-2001, 05:26 PM

Anyone know of any? I would like to play around a little with flow rate, temperatures, and hose size a little. So if you know of one, drop me a line.

UnaClocker · 04-30-2001, 07:51 PM

Heater cores come with fittings around that size.

ck42 · 05-01-2001, 08:45 AM

Not sure about others, but I do know that OCWC sells BigMama with 1/2" by request.

Not sure if you're looking for something cheaper to play around with tho.

lorry12 · 05-11-2001, 03:07 PM

use an oil cooler from a small car or motorbike, they are easily adapted (once cleaned) and have approx 1/2" bore.

sharpbw · 05-11-2001, 08:14 PM

Lots of pics and stuff here:
http://www.heatercore4u.com/

ondaedg · 05-12-2001, 03:42 AM

thanks for the info guys. Bill, I was lookin at that site last nite. There has to be other heatercore sites online. The better the selection, the better for us.

lorry12 · 05-13-2001, 07:29 AM

just go to a scrap yard ( i believe they are called "junk yards" in the US !

)
you will find oil cooler on a motorbike or small car ( got mine from a mini !!)

good luck

FreakinCold · 05-27-2001, 04:53 AM

Get a hayden 1401 and cut off the ends. They flare down to a 3/8 hose size but the tube is damn close to 1/2". If you cut it right, you'll have plenty of room for the hose clamps. Good luck with your w/c setup.

FrakinCold WWW.FreakinCold.com

04-30-2001, 05:26 PM	#1
ondaedg Cooling Savant Join Date: Nov 2000 Posts: 130	lookin for Radiator with 1/2" or bigger inlets Anyone know of any? I would like to play around a little with flow rate, temperatures, and hose size a little. So if you know of one, drop me a line. __________________ ondaedg@procooling.com

04-30-2001, 07:51 PM	#2
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Heater cores come with fittings around that size. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

05-11-2001, 03:07 PM	#4
lorry12 Cooling Neophyte Join Date: Apr 2001 Posts: 5	use an oil cooler from a small car or motorbike, they are easily adapted (once cleaned) and have approx 1/2" bore. __________________ goat

05-12-2001, 03:42 AM	#6
ondaedg Cooling Savant Join Date: Nov 2000 Posts: 130	thanks for the info guys. Bill, I was lookin at that site last nite. There has to be other heatercore sites online. The better the selection, the better for us. __________________ ondaedg@procooling.com

05-13-2001, 07:29 AM	#7
lorry12 Cooling Neophyte Join Date: Apr 2001 Posts: 5	just go to a scrap yard ( i believe they are called "junk yards" in the US ! ) you will find oil cooler on a motorbike or small car ( got mine from a mini !!) good luck __________________ goat

05-01-2001, 08:45 AM	#3
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Not sure about others, but I do know that OCWC sells BigMama with 1/2" by request. Not sure if you're looking for something cheaper to play around with tho.

05-11-2001, 08:14 PM	#5
sharpbw Cooling Neophyte Join Date: May 2001 Posts: 3	Lots of pics and stuff here: http://www.heatercore4u.com/

05-27-2001, 04:53 AM	#8
FreakinCold Cooling Neophyte Join Date: May 2001 Location: las vegas Posts: 3	Get a hayden 1401 and cut off the ends. They flare down to a 3/8 hose size but the tube is damn close to 1/2". If you cut it right, you'll have plenty of room for the hose clamps. Good luck with your w/c setup. FrakinCold WWW.FreakinCold.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)