Post pictures of your resivors - Page 2

TerraMex · 06-21-2005, 12:28 PM

ghetto res.
more ghetto res (2 loop).
more more ghetto res (eheim fitted).
currently i use a T line, since i switched to a mcp600.

pierreg60 · 06-24-2005, 01:41 PM

my first full cooper

my first full plexiglass

my first cylindrical

5"1/4

& my page (divers realisation)
http://perso.wanadoo.fr/superglide/reservoir.htm

starbuck3733t · 06-24-2005, 03:53 PM

Those are fantastic! you've got really good skills with plexi pierreg60!

and that copper airtrap is dead sexy!

n00b 0f l337 · 06-24-2005, 03:58 PM

Yeah those are good looking.

starbuck3733t · 06-24-2005, 04:05 PM

speaking of which, do you make them for people, or just for fun?

looking around your home page, i got the impression that you may make them for people.

pierreg60 · 06-25-2005, 07:37 AM

Sorry for my bad English I am french..........

thank you for the compliments

I manufacture for forumeurs and also for the fun

Pessimisten · 06-25-2005, 09:28 AM

Great reservoirs everybody.

What type of material/glue do you use for putting plexi together?

pierreg60 · 06-25-2005, 09:35 AM

for PMMA=>PMMA i use chlorophorm
for PMMA =>PMMA XT i use epoxy adhesive 2 composents

Pessimisten · 06-25-2005, 11:47 AM

Quote:

Originally Posted by pierreg60

for PMMA=>PMMA i use chlorophorm
for PMMA =>PMMA XT i use epoxy adhesive 2 composents

Thank you very much for those answers

zachjowi · 06-26-2005, 11:13 PM

pierreg60

how did you make that awsome copper reserivor?

pierreg60 · 06-27-2005, 02:58 PM

a tube of Ø 40mm and dish of copper of 3mm polishing and thats all

(google traduction sorry)

starbuck3733t · 06-28-2005, 09:36 PM

"40mm OD tube of copper and some 3mm copper plate, soldered and polished" I think.

zachjowi · 07-12-2005, 03:42 PM

any other neat reserivors around?

Zax · 07-15-2005, 02:49 PM

Lo all, heres my custom side panel res, posted this up a while back...

zackbass · 07-15-2005, 03:21 PM

I've got one that's a little out of the ordinary. I don't know if any of you have seen it before, I'm not too active on the various forums.

I built the case from stainless steel tubing. The far side of the case is the reservoir and the near side is pressurized for distribution. The pump draws from the bottom of the res, pushes through the radiators and into the pressurized side. All the waterblocks pick up from bungs in the side and return back to the reservoir. I did this one about two years ago, and I'm halfway through the next iteration right now.

zachjowi · 07-18-2005, 10:04 PM

Quote:

Originally Posted by Zax

Lo all, heres my custom side panel res, posted this up a while back...

That is awsome and nice LCD's

Tommy_86 · 07-26-2005, 10:53 AM

here is my res

rcillig · 07-26-2005, 11:20 AM

nice you make that ?

Tommy_86 · 07-26-2005, 11:51 AM

yes I have made that res

pHaestus · 07-26-2005, 12:38 PM

I'm lazy and just use a DD res with hole drilled in the threads for better filling action:

billbartuska · 07-27-2005, 04:14 PM

Not custom, but still high "bling factor.
Note that those are 1/2" barbs, rare for such a small res.
I got it at: www.performance-pcs.com

It works great on an Eheim 1048, but an Iwaki 20RZT overwhelms it. The air goes right through! The inner chamber is only 1-1/4" (D) X 4-3/4" (H).

Dunno · 07-27-2005, 06:38 PM

This 'Res' will contain a small Cistern made from a carburator needle and seet and float. And a Mistmaker.

[IMG]

[/IMG]

More pics here

Will do a Proj Log whent the enclosure plate is cut and bent.

zachjowi · 07-27-2005, 11:52 PM

Quote:

Originally Posted by Tommy_86

here is my res

where did you get the plexi tube?

JFettig · 07-28-2005, 07:36 AM

probably not the same place, but take a look at usplastic.com

Jon

Tommy_86 · 07-28-2005, 09:42 AM

From my dads work

06-21-2005, 12:28 PM	#26
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	ghetto res. more ghetto res (2 loop). more more ghetto res (eheim fitted). currently i use a T line, since i switched to a mcp600. __________________ "we need more cowbell."

06-24-2005, 03:53 PM	#28
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	Those are fantastic! you've got really good skills with plexi pierreg60! and that copper airtrap is dead sexy! __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

06-24-2005, 04:05 PM	#30
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	speaking of which, do you make them for people, or just for fun? looking around your home page, i got the impression that you may make them for people. __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

06-25-2005, 09:28 AM	#32
Pessimisten Cooling Neophyte Join Date: May 2005 Location: Sweden Posts: 13	Great reservoirs everybody. What type of material/glue do you use for putting plexi together? __________________ My english isn't perfect, so sue me!

06-26-2005, 11:13 PM	#35
zachjowi Cooling Savant Join Date: May 2005 Location: US Posts: 123	pierreg60 how did you make that awsome copper reserivor? __________________ Intel is the way to go.

06-24-2005, 01:41 PM	#27
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	my first full cooper my first full plexiglass my first cylindrical 5"1/4 & my page (divers realisation) http://perso.wanadoo.fr/superglide/reservoir.htm

06-24-2005, 03:58 PM	#29
n00b 0f l337 Cooling Neophyte Join Date: Jun 2005 Location: New Jersey Posts: 38	Yeah those are good looking.

06-25-2005, 07:37 AM	#31
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	Sorry for my bad English I am french.......... thank you for the compliments I manufacture for forumeurs and also for the fun

06-25-2005, 09:35 AM	#33
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	for PMMA=>PMMA i use chlorophorm for PMMA =>PMMA XT i use epoxy adhesive 2 composents

06-27-2005, 02:58 PM	#36
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	a tube of Ø 40mm and dish of copper of 3mm polishing and thats all (google traduction sorry)

06-28-2005, 09:36 PM	#37
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	"40mm OD tube of copper and some 3mm copper plate, soldered and polished" I think. __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

07-12-2005, 03:42 PM	#38
zachjowi Cooling Savant Join Date: May 2005 Location: US Posts: 123	any other neat reserivors around? __________________ Intel is the way to go.

07-15-2005, 02:49 PM	#39
Zax Cooling Neophyte Join Date: May 2004 Location: UK Posts: 15	Lo all, heres my custom side panel res, posted this up a while back...

07-15-2005, 03:21 PM	#40
zackbass Cooling Neophyte Join Date: Apr 2005 Location: Rockaway NJ Posts: 11	I've got one that's a little out of the ordinary. I don't know if any of you have seen it before, I'm not too active on the various forums. I built the case from stainless steel tubing. The far side of the case is the reservoir and the near side is pressurized for distribution. The pump draws from the bottom of the res, pushes through the radiators and into the pressurized side. All the waterblocks pick up from bungs in the side and return back to the reservoir. I did this one about two years ago, and I'm halfway through the next iteration right now.

07-26-2005, 10:53 AM	#42
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	here is my res __________________ Im from Sweden so my English is not so god but i try

07-26-2005, 11:20 AM	#43
rcillig Cooling Neophyte Join Date: Jul 2005 Location: Omaha, Nebraska Posts: 3	nice you make that ? __________________ Windows XP Pro SP2 Thermaltake Xaser III Aluminum Case AMD Athlon 2600 Moblie IQYHA 0352 RPMW(217*12) 2.600 @1.80vcore ThermalrightSLK-947U / 92mm Panaflo DFI Lanparty NFII Ultra Rev. B (Hellfire 6-19-04 Rev2) Drivers 4.27 1gig Mushkin PC3200 2-2-2-11@3.3v Antec NEO Power 480 BFG 6800 Ultra OCed 466mhz / 1.18ghz SB Audigy 2 ZS 160 GiG Seagate SATA - 320gig WD SATA - 250gig Maxtor - 60gig Maxtor 17inch Samsung 712n LCD LG DVD Writer - LG DVD/CW Combo Heatware ID

07-26-2005, 11:51 AM	#44
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	yes I have made that res __________________ Im from Sweden so my English is not so god but i try

07-26-2005, 12:38 PM	#45
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	I'm lazy and just use a DD res with hole drilled in the threads for better filling action: __________________ Getting paid like a biker with the best crank... -MF DOOM

07-27-2005, 06:38 PM	#47
Dunno Cooling Neophyte Join Date: Sep 2003 Location: South Africa Posts: 82	This 'Res' will contain a small Cistern made from a carburator needle and seet and float. And a Mistmaker. [IMG][/IMG] More pics here Will do a Proj Log whent the enclosure plate is cut and bent.

07-28-2005, 07:36 AM	#49
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	probably not the same place, but take a look at usplastic.com Jon

07-28-2005, 09:42 AM	#50
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	From my dads work __________________ Im from Sweden so my English is not so god but i try

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)