noob's first thoughts - Page 2

Brad · 05-04-2002, 12:35 AM

yeah, he cut the psu down a bit, but he still use's the top slot in the case.

Crobe · 05-06-2002, 10:30 AM

ECU Pirate, one more question for you. What is your Airtrap mounted too? I was thinking of U bolting it to my power supply (not sure if it's practical I was just thinking about it and I'm at work so I can't take a look at my computer to check) I'd rather not have it connected to the side or top panels though. Thanks for all your help.

ECUPirate · 05-06-2002, 10:35 AM

it's just suspended there... the hose connecting it to the pump is very short, and the other hose helps hold it up too. It can't lean to the side very far, as the hard drives are resting against it. I loosely ziptied it to the top case rail just to be careful. The panels operate normally.

05-04-2002, 12:35 AM	#26
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	yeah, he cut the psu down a bit, but he still use's the top slot in the case. __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-06-2002, 10:35 AM	#28
ECUPirate Hottest Stank of them All Join Date: Mar 2002 Location: Washington, DC area Posts: 533	it's just suspended there... the hose connecting it to the pump is very short, and the other hose helps hold it up too. It can't lean to the side very far, as the hard drives are resting against it. I loosely ziptied it to the top case rail just to be careful. The panels operate normally. __________________ Does a radioactive cat have 18 half lifes? --Kenny my pimpin' rig: ...previously poorly cooled... 486DX-2 66mhz @ 75mhz, 4Mb ram, shared, 256Mb hard drive Onboard VGA, watercooled, of course 16-color monitor, labtec speakers, 28kbs USRobotics modem Windows XP (think about it) Maze 3, DDen GF3 block, Eheim 1250, econoline van HC, 1/2" hose w/ 5/8" fittings Comair 172mm fan

05-06-2002, 10:30 AM	#27
Crobe Cooling Neophyte Join Date: Apr 2002 Location: Springfield MA Posts: 12	ECU Pirate, one more question for you. What is your Airtrap mounted too? I was thinking of U bolting it to my power supply (not sure if it's practical I was just thinking about it and I'm at work so I can't take a look at my computer to check) I'd rather not have it connected to the side or top panels though. Thanks for all your help.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)