barton vs. not-barton? - Page 2

gmat · 03-12-2003, 12:13 PM

Just make sure you pop out the HS, lap the base, remove the pad, and use thermal grease. The original one seldom touches the chip itself.
Active cooling is a necessity, ppl using the HS a passive way found out it climbed to about 60-70°C.
A blorb will do. And for silence afficionados, a waterblock.

iroc409 · 03-12-2003, 04:32 PM

i.e. the zalman with a 120mm delta...

03-12-2003, 04:32 PM	#27
iroc409 Cooling Savant Join Date: Oct 2002 Location: midwest side, yo Posts: 596	i.e. the zalman with a 120mm delta... __________________ :shrug:

03-12-2003, 12:13 PM	#26
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	Just make sure you pop out the HS, lap the base, remove the pad, and use thermal grease. The original one seldom touches the chip itself. Active cooling is a necessity, ppl using the HS a passive way found out it climbed to about 60-70°C. A blorb will do. And for silence afficionados, a waterblock.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)