Post your watercooled pictures - Page 3

Boli · 08-14-2003, 11:54 AM

Now I have cleand it it up it looks very spartan. Behind this nest of fans is two black ice micro (with 4x80mm) and they cool things very nicely indeed... Quite chuffed with them actually... even though i haven't actually SEEN them in months.

NOTE: The fan grill without a fan is to aide ventilation... ok ok I had a spare grill and edging lieing around and I was bored... looks better though

Boli · 08-14-2003, 12:01 PM

And finally the airtrap/res thing. Since there is a thread elsewhere about the perfect airtrap I edited this picy to show what it is clearer.

The entire systems clears up in a few minuites ... that is including the mass of tiny bubbles the pump creates when I'm filling it.

And there you are.. finito.

Puzzdre · 08-14-2003, 12:28 PM

Very nice rig! I like that case, which one is it?

Boli · 08-14-2003, 08:29 PM

Erm... if you are talking to me then thanks

And see my (finally got round to doing one) sig.

siavash_s_s · 08-15-2003, 03:43 AM

i need parts, tools and labour -
anyone up to flying over and making my case better (involves making wc setup and overclocking too)

starbuck3733t · 08-15-2003, 05:36 PM

But that's just stage 1 testing... notice no ram or power hooked up. After the res died (alcohol cracked the plexi top/bottom) I had to rip everything back apart. Delayed for another month or so until I get some more money or break down and use my CC to buy some stuff for it.

leejsmith · 08-15-2003, 05:55 PM

Quote:

Originally posted by starbuck3733t
[IMG]

But that's just stage 1 testing... notice no ram or power hooked up. After the res died (alcohol cracked the plexi top/bottom) I had to rip everything back apart. Delayed for another month or so until I get some more money or break down and use my CC to buy some stuff for it.

is the case a intel sc5000 server chassis ?

it looks like the one i have and keep thinking how much room there is at the front for water cooling stuff.

starbuck3733t · 08-15-2003, 09:07 PM

You hit the nail on the head. it's a hudson (SC5000) chassis all right. things are a bit cramped w\ that heatercore b/c its too wide for the top drive bays, and it's also pretty tall with the shroud. if i had an HC that only took a single 120 instead of 2, there would be lots more breathing room, but as it stands in my testing it cools like a champ... but testing = suckage due to breakdown and corrosion problems b/c im dumb

water idles 2*C of ambient w\ fans on low.

thetruememphis · 08-16-2003, 11:57 PM

my system

dfi lanparty nforce2
amd xp 2600running@2486
kingston pc3500 2x256 hyperx
ati 9700 with vmods
dangerden cpu,gpu,northbridge waterblocks
315ehime waterpump
innovatek res.
lian-li full tower pc71
looking for a mem. mod for the motherboard to let me run volts above 2.7.

WaterPimp · 08-17-2003, 04:35 AM

here is mine

WaterPimp · 08-17-2003, 04:36 AM

And here is the waterblock that I use, DYI is the only way to go!!!

HaloJones · 09-17-2003, 04:54 PM

Rig 1

PC-60, 8RDA+, XP1700B at 2400MHz, SlitEdge, Gold BIX, BeCooling Pump/Res.

Rig 2

ECS K7S5A, XP2100b at 2278MHz (in-socket wire-trick), Little River White Water #095, Chevette Core, hand-made shroud, 1250.

ndtinker · 09-22-2003, 11:12 AM

Lian-Li PC71
AMD Athlon XP 2500 Barton @ 2.3GHz (can do 2.4 but not from cold boot, probably due to my mobo not being able to more than 1.85v (currently 200x11.5)

Corsair XMS PC2700 Low Latency
Asus A7N8X Deluxe Rev. 1.04
Swiftech MCW5000 block
Danner 250gph pump
BayRes
BIX Rad
120gig 8mb WD HDD
Radeon 9700 128MB
blah, blah.

CPU 99*F idle, 102*F load
Case 73*F idle, 77*F load, 72*F ambient.

Sc0rian · 09-22-2003, 07:47 PM

I spent alot of time working on the rad at the top. I cut it out with a jigsaw.

This is it with blue light

Heres a great big pic a great 1

Here is a 600kb file, a very very good pic

Will get apic soon of both lights

GenGoku · 09-22-2003, 07:52 PM

is that mustard in your tubing

Boli · 09-22-2003, 07:59 PM

No... I think he's pleased to see you. ;P

GenGoku · 09-22-2003, 08:01 PM

Quote:

Originally posted by Boli
No... I think he's pleased to see you. ;P

*Runs for the hills*

Sc0rian · 09-23-2003, 03:13 AM

lol

I know. I am changing the colour tonight!

GenGoku · 09-23-2003, 03:19 AM

naw, i was just joking. yellow looks good w/ your black case and yellow mobo and it's pretty unique.

Sc0rian · 09-23-2003, 03:37 AM

hehe thnxs mate

And my 90% bend

When I was building it then

thetruememphis · 09-23-2003, 06:26 AM

looks great

Sc0rian · 09-23-2003, 11:28 AM

hehe thnxs mate

aBo · 10-15-2003, 06:45 PM

Sry to bump up this thread but had to comment on Jackal's rig, that guy has pretty much done something I'm looking forward to do as soon as I get all the parts gathered from here and there =)... and BTW Jackal, you've got mail...

(yes, this is my first post here, I'm more of a reading than posting type=)

kommando · 10-21-2003, 04:00 AM

Nice setup too all. Alot of big freakz here well it is a procooling forum so what do ya expect?

Driver 7 · 10-26-2003, 07:50 AM

08-14-2003, 12:28 PM	#53
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	Very nice rig! I like that case, which one is it? __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

08-14-2003, 08:29 PM	#54
Boli Cooling Savant Join Date: Apr 2003 Location: Blackburn / Dundee Posts: 451	Erm... if you are talking to me then thanks And see my (finally got round to doing one) sig. __________________ 1800+ @ 2247 (214x10.5) - STABLE, 512MB PC3700 TwinX Cosair RAM, NF7-S v2.0, GeForce3 Ti200 Parallel BIM, 120.1 Thermochill, Eheim 1048, Maze 3, Maze4 GPU, "Z" chipset, 1/2" tubing, PC-70: 5x120mm & 9x80mm fans. Internet Server & second machine (folding 24/7): 512MB DDR RAM, XP2000+

08-15-2003, 03:43 AM	#55
siavash_s_s Cooling Savant Join Date: Aug 2003 Location: here n there Posts: 194	i need parts, tools and labour - anyone up to flying over and making my case better (involves making wc setup and overclocking too) __________________ buy me a mill

08-15-2003, 05:36 PM	#56
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	But that's just stage 1 testing... notice no ram or power hooked up. After the res died (alcohol cracked the plexi top/bottom) I had to rip everything back apart. Delayed for another month or so until I get some more money or break down and use my CC to buy some stuff for it. __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

08-15-2003, 09:07 PM	#58
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	You hit the nail on the head. it's a hudson (SC5000) chassis all right. things are a bit cramped w\ that heatercore b/c its too wide for the top drive bays, and it's also pretty tall with the shroud. if i had an HC that only took a single 120 instead of 2, there would be lots more breathing room, but as it stands in my testing it cools like a champ... but testing = suckage due to breakdown and corrosion problems b/c im dumb water idles 2C of ambient w\ fans on low. __________________ Goliath:* 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

08-16-2003, 11:57 PM	#59
thetruememphis Cooling Neophyte Join Date: Jun 2003 Location: romeo, michigan Posts: 15	my system dfi lanparty nforce2 amd xp 2600running@2486 kingston pc3500 2x256 hyperx ati 9700 with vmods dangerden cpu,gpu,northbridge waterblocks 315ehime waterpump innovatek res. lian-li full tower pc71 looking for a mem. mod for the motherboard to let me run volts above 2.7. __________________ Abit nf7s v2. with vmods amd xp 2600 kingston hyper x pc 3500 ati radeon 9700 pro with vmods dangerden waterblocks(but cascade comming soon) 01 score 19025!

09-17-2003, 04:54 PM	#62
HaloJones Cooling Neophyte Join Date: Sep 2003 Location: Moab Posts: 45	Rig 1 PC-60, 8RDA+, XP1700B at 2400MHz, SlitEdge, Gold BIX, BeCooling Pump/Res. Rig 2 ECS K7S5A, XP2100b at 2278MHz (in-socket wire-trick), Little River White Water #095, Chevette Core, hand-made shroud, 1250.

09-22-2003, 11:12 AM	#63
ndtinker Cooling Neophyte Join Date: Jun 2003 Location: Medina, TN Posts: 30	Lian-Li PC71 AMD Athlon XP 2500 Barton @ 2.3GHz (can do 2.4 but not from cold boot, probably due to my mobo not being able to more than 1.85v (currently 200x11.5) Corsair XMS PC2700 Low Latency Asus A7N8X Deluxe Rev. 1.04 Swiftech MCW5000 block Danner 250gph pump BayRes BIX Rad 120gig 8mb WD HDD Radeon 9700 128MB blah, blah. CPU 99F idle, 102F load Case 73F idle, 77F load, 72F ambient. __________________ -=:: Deus Ex Machina ::=- Jackson, TN's ONLY LAN Group http://www.jacksongamingleague.com Last edited by ndtinker; 10-09-2003 at 05:32 PM.*

09-22-2003, 07:47 PM	#64
Sc0rian Cooling Neophyte Join Date: Sep 2003 Location: Suffolk.UK Posts: 92	I spent alot of time working on the rad at the top. I cut it out with a jigsaw. This is it with blue light Heres a great big pic a great 1 Here is a 600kb file, a very very good pic Will get apic soon of both lights

09-22-2003, 07:52 PM	#65
GenGoku Cooling Savant Join Date: Apr 2002 Location: Southern California Posts: 177	is that mustard in your tubing __________________ Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water

09-22-2003, 07:59 PM	#66
Boli Cooling Savant Join Date: Apr 2003 Location: Blackburn / Dundee Posts: 451	No... I think he's pleased to see you. ;P __________________ 1800+ @ 2247 (214x10.5) - STABLE, 512MB PC3700 TwinX Cosair RAM, NF7-S v2.0, GeForce3 Ti200 Parallel BIM, 120.1 Thermochill, Eheim 1048, Maze 3, Maze4 GPU, "Z" chipset, 1/2" tubing, PC-70: 5x120mm & 9x80mm fans. Internet Server & second machine (folding 24/7): 512MB DDR RAM, XP2000+

09-23-2003, 03:13 AM	#68
Sc0rian Cooling Neophyte Join Date: Sep 2003 Location: Suffolk.UK Posts: 92	lol I know. I am changing the colour tonight!

09-23-2003, 03:19 AM	#69
GenGoku Cooling Savant Join Date: Apr 2002 Location: Southern California Posts: 177	naw, i was just joking. yellow looks good w/ your black case and yellow mobo and it's pretty unique. __________________ Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water

09-23-2003, 03:37 AM	#70
Sc0rian Cooling Neophyte Join Date: Sep 2003 Location: Suffolk.UK Posts: 92	hehe thnxs mate And my 90% bend When I was building it then

09-23-2003, 06:26 AM	#71
thetruememphis Cooling Neophyte Join Date: Jun 2003 Location: romeo, michigan Posts: 15	this is my baby looks great __________________ Abit nf7s v2. with vmods amd xp 2600 kingston hyper x pc 3500 ati radeon 9700 pro with vmods dangerden waterblocks(but cascade comming soon) 01 score 19025!

09-23-2003, 11:28 AM	#72
Sc0rian Cooling Neophyte Join Date: Sep 2003 Location: Suffolk.UK Posts: 92	hehe thnxs mate

10-15-2003, 06:45 PM	#73
aBo Cooling Neophyte Join Date: Aug 2003 Location: Finland Posts: 18	Sry to bump up this thread but had to comment on Jackal's rig, that guy has pretty much done something I'm looking forward to do as soon as I get all the parts gathered from here and there =)... and BTW Jackal, you've got mail... (yes, this is my first post here, I'm more of a reading than posting type=)

10-21-2003, 04:00 AM	#74
kommando Cooling Neophyte Join Date: Oct 2003 Location: Brisbane -> St. Lucia Posts: 12	Nice setup too all. Alot of big freakz here well it is a procooling forum so what do ya expect? __________________ Watercooling Setup: Boris Waterblock \|\| Heto 2800 (1200l/h) \|\| '89 Camry Heatercore \|\| Senfu Kink Free Tubing Possible Changes: Silverprop Fusion GPU Block \|\| Sicce 1300 inline pump \|\| Clearfex tubing My Mod: HQ-08=-=Painted \|\| Perspexed \|\| UV goodness

10-26-2003, 07:50 AM	#75
Driver 7 Cooling Neophyte Join Date: Oct 2003 Location: Vancouver, BC Posts: 8	__________________ http://www.towboytigger.com/tigger22.jpg Asus K8V Deluxe, Leadtek FX 5950 , Athlon 64 3200, OCZ PC3200 DDR400, Yamaha F1 cdrw, 3 SERIAL ATA 120 gig Maxtor HD's on 2 on Raid 0, Zalman CPU Waterblock, Innovatek GPU waterblock, Swiftech southbridge waterblock, 2 pumps, 2 rads all placed in a Cool air case, Altec Lancing 5.1 Surround, Thermaltake Xaser III Case, Stealth 470w Power supply, 17"NEC Lcd My Rig

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)