Post pictures of your homebuilt blocks here! - Page 6

Pirs · 05-25-2005, 12:25 PM

DeMolT · 06-25-2005, 05:44 AM

Well hi there new to the forum..
I've been busy with my 1st wc system making everything my self (or with help from my dad

who is an euhm Goldsmith? my english is sucky but anyways)
My wc CPU block is as good as finished just some plugs on it and it's ready.
CPU Block is made of 100% pure silver.
Making a reservoir of PVC pipes with screwable top
and the radiator is made of Copper pipes.
I'm gonna make it external.

Here are some pics to start with:
http://sam.bzandbergen.nl/waterkoeling/100_9578.jpg
http://sam.bzandbergen.nl/waterkoeling/100_9584.jpg

IndianaCouple · 06-27-2005, 07:00 PM

I hope this will work! Sorry for my impatience...

jaydee · 06-27-2005, 07:59 PM

Quote:

Originally Posted by IndianaCouple

I hope this will work! Sorry for my impatience...

Downloaded and extracted but file is unopenable? Maybe try to save as a .dxf and then zipping it?

IndianaCouple · 06-27-2005, 08:30 PM

I'll try .dxf and try to zip, thank you for your patience! I know G and M code and can't seem to figure out this highly complex Winzip! LOL (and it's not in 3, 4, or even 5 axes!) How sad...

IndianaCouple · 06-27-2005, 08:47 PM

That's it!

Can't believe I can't figure this out! Maybe it's the lack of sleep for 36 hours? I don't know....

n00b 0f l337 · 06-28-2005, 12:40 AM

Pirs, that looks like the vga block is going to break the card. You should think about making a pci slot supporter.

mwolfman · 07-02-2005, 11:30 AM

Quote:

Originally Posted by Pirs

do you need all that copper thats in the middel?

coldy81 · 07-12-2005, 08:06 PM

what do u think about this design for a cpu block tested with p4 478 3.0 @3.6

idle 32
load 46
amient temp 30
in cairo

made with copper base depth 14 mm
cover 3 mm copper

Tommy_86 · 07-26-2005, 10:49 AM

Here is my first waterblocks ever.

Any comments are welcome

[

iakovl · 07-26-2005, 12:27 PM

Quote:

Originally Posted by Tommy_86

Here is my first waterblocks ever.

Any comments are welcome

what is the desighn?
how do it look in side?

Tommy_86 · 07-26-2005, 06:10 PM

here is some more pics att my flow indikator made of some acrylic and a old fan

MadHacker · 07-26-2005, 06:21 PM

Quote:

Originally Posted by Tommy_86

here is some more pics att my flow indikator made of some acrylic and a old fan

so the fan blade just floats in the acrylic base?

Tommy_86 · 07-26-2005, 06:36 PM

I cut out the fan from the frame and took out the magnets and stuff in the fan, then just glued it on the acrylic. sorry for my bad english

zachjowi · 08-03-2005, 07:40 PM

Here is an aluminum CPU cooling block that I made for socket 478.

ljohn787 · 08-06-2005, 09:37 AM

As some of you might have read in my thread, the block is finally complete. I'll post some pictures of it here as well.

dnkroz · 09-25-2005, 03:02 AM

Hi. Here, some of my blocks.

First block and system for a AMD K-6 processor.

This

Following block for a AMD Slot A processor.

This

The next, Duraluminium WB.

Photos

Construction

F4.

Photos

Construction

And the last one, Hydrae.

Photos

Construction

dnkroz · 10-26-2005, 12:11 PM

Thank you Breach.

The performance of the F4 and Hydrae are similar to that of some commercial blocks and in any case is sufficient, the Hydrae has the advantage of being very slightly restrictive. Though soon I will prove them with sufficient means, I enjoy more during the construction that with the performance.

Ketchak · 10-27-2005, 07:36 PM

Other more for the collection...

The Octopus:

http://www.devilmaster.org/modules/c...T/DSCN6148.jpg

Pics

Ketchak.
www.devilmaster.org

pierreg60 · 10-29-2005, 09:07 AM

my X waterblock

and link to the construction
http://www.cooling-masters.com/forum...showtopic=2993

Skinny13 · 01-07-2006, 06:12 PM

the old one v3.1

v3.2

v3.3

and the latest version v4.0

and

Qwertyiopisme · 01-25-2006, 03:05 AM

This block is very simple, just a copper slab and a pipe with the bottom half filed away:

VGA block, see farther down for internal design

CPU block, similar internal design as the vga block

Inside the VGA block

The block is CNC'ed (I have ten more at home, the time per piece was only 15 minutes so I made some during some free time at school.

The VGA block is quite restrictive, mainly because of the built in 90degree turns.

Pirs · 01-29-2006, 06:13 AM

JFettig · 03-23-2006, 10:54 AM

Heres my A64 entry

Havent tried it, but it did run on an old AXP and ran the same as hexblox rev1

Jon

pierreg60 · 03-25-2006, 02:44 PM

LRWW top plexi

05-25-2005, 12:25 PM	#126
Pirs Cooling Neophyte Join Date: May 2005 Location: Czech Republic Posts: 2	__________________ www.pirs.vyrobce.cz www.h2o.kvalitne.cz

06-25-2005, 05:44 AM	#127
DeMolT Cooling Neophyte Join Date: Jun 2005 Location: Holland Posts: 1	Silver watercooling (my 1st one) Well hi there new to the forum.. I've been busy with my 1st wc system making everything my self (or with help from my dad who is an euhm Goldsmith? my english is sucky but anyways) My wc CPU block is as good as finished just some plugs on it and it's ready. CPU Block is made of 100% pure silver. Making a reservoir of PVC pipes with screwable top and the radiator is made of Copper pipes. I'm gonna make it external. Here are some pics to start with: http://sam.bzandbergen.nl/waterkoeling/100_9578.jpg http://sam.bzandbergen.nl/waterkoeling/100_9584.jpg

07-26-2005, 10:49 AM	#135
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	Here is my first waterblocks ever. Any comments are welcome [ __________________ Im from Sweden so my English is not so god but i try Last edited by Tommy_86; 07-26-2005 at 10:56 AM.

07-26-2005, 06:10 PM	#137
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	here is some more pics att my flow indikator made of some acrylic and a old fan __________________ Im from Sweden so my English is not so god but i try

07-26-2005, 06:36 PM	#139
Tommy_86 Cooling Neophyte Join Date: Jun 2004 Location: Sweden Posts: 22	I cut out the fan from the frame and took out the magnets and stuff in the fan, then just glued it on the acrylic. sorry for my bad english __________________ Im from Sweden so my English is not so god but i try

06-28-2005, 12:40 AM	#132
n00b 0f l337 Cooling Neophyte Join Date: Jun 2005 Location: New Jersey Posts: 38	Pirs, that looks like the vga block is going to break the card. You should think about making a pci slot supporter.

08-03-2005, 07:40 PM	#140
zachjowi Cooling Savant Join Date: May 2005 Location: US Posts: 123	Here is an aluminum CPU cooling block that I made for socket 478. __________________ Intel is the way to go. Last edited by zachjowi; 08-04-2005 at 11:14 AM.

08-06-2005, 09:37 AM	#141
ljohn787 Cooling Neophyte Join Date: Jul 2005 Location: New Jersey Posts: 35	As some of you might have read in my thread, the block is finally complete. I'll post some pictures of it here as well.

09-25-2005, 03:02 AM	#142
dnkroz Cooling Neophyte Join Date: Jan 2003 Location: Spain Posts: 25	Hi. Here, some of my blocks. First block and system for a AMD K-6 processor. This Following block for a AMD Slot A processor. This The next, Duraluminium WB. Photos Construction F4. Photos Construction And the last one, Hydrae. Photos Construction

10-26-2005, 12:11 PM	#143
dnkroz Cooling Neophyte Join Date: Jan 2003 Location: Spain Posts: 25	Thank you Breach. The performance of the F4 and Hydrae are similar to that of some commercial blocks and in any case is sufficient, the Hydrae has the advantage of being very slightly restrictive. Though soon I will prove them with sufficient means, I enjoy more during the construction that with the performance.

10-27-2005, 07:36 PM	#144
Ketchak Cooling Neophyte Join Date: May 2002 Location: Spain Posts: 30	Ketchak ''Octopus Waterblock'' Other more for the collection... The Octopus: http://www.devilmaster.org/modules/c...T/DSCN6148.jpg Pics Ketchak. www.devilmaster.org

10-29-2005, 09:07 AM	#145
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	my X waterblock and link to the construction http://www.cooling-masters.com/forum...showtopic=2993 __________________ Sorry for my english ........ i am frenchy

01-07-2006, 06:12 PM	#146
Skinny13 Cooling Neophyte Join Date: Feb 2005 Location: Greece Posts: 9	Re: Post pictures of your homebuilt blocks here! the old one v3.1 v3.2 v3.3 and the latest version v4.0 and

01-25-2006, 03:05 AM	#147
Qwertyiopisme Cooling Neophyte Join Date: Dec 2003 Location: Gothenburg, Sweden Posts: 4	Re: Post pictures of your homebuilt blocks here! This block is very simple, just a copper slab and a pipe with the bottom half filed away: VGA block, see farther down for internal design CPU block, similar internal design as the vga block Inside the VGA block The block is CNC'ed (I have ten more at home, the time per piece was only 15 minutes so I made some during some free time at school. The VGA block is quite restrictive, mainly because of the built in 90degree turns.

01-29-2006, 06:13 AM	#148
Pirs Cooling Neophyte Join Date: May 2005 Location: Czech Republic Posts: 2	Re: Post pictures of your homebuilt blocks here! __________________ www.pirs.vyrobce.cz www.h2o.kvalitne.cz

03-25-2006, 02:44 PM	#150
pierreg60 Cooling Neophyte Join Date: Aug 2004 Location: france Posts: 17	Re: Post pictures of your homebuilt blocks here! LRWW top plexi __________________ Sorry for my english ........ i am frenchy

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)