|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
Thread Tools |
03-18-2005, 08:20 AM | #151 | |
Thermophile
Join Date: Sep 2002
Location: Melbourne, Australia
Posts: 2,538
|
Quote:
The tubing that I use, and recommend, is this one: http://www.usplastic.com/catalog/pro...duct%5Fid=7689 Item No: 54047 Really good stuff. Much easier to work with than 1/2" ID tubing, slips over 1/2" OD fittings as noted, bends tighter radii without kinking and with MUCH less effort, does not sacrifice flow-rates if using less than 3 metere of it when slipped over 1/2" OD barbs, and is slimmer and neater looking. |
|
03-18-2005, 08:46 AM | #152 |
Cooling Savant
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
|
Bookmarked, noted, and enquiry e-mail for trade supplies in quantity sent!
|
03-18-2005, 08:49 AM | #153 | |
Cooling Neophyte
Join Date: Dec 2002
Location: Twin Cities
Posts: 67
|
Quote:
Edit: Also consider the EBM/Pabst 7112 available from MPJA for the "Chevette" class of heater cores. Its 150x38mm size matches the 150mm footprint of that class of heater core perfectly. Hoot
__________________
DFI LP UT NF4 Ultra-D 7.04-3 Bios A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore 2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77V Connect 3D x850xt 620/625 2x WD 36GB Raptors in Raid0 DIY Jet Impingement WB on CPU / Pipecap WB on GPU Shrouded Camaro Heater Core / Swiftech MCP655 Pump Antec P-160 Tower / Seasonic S12 600W PSU MAXIM 6658 Thermal Diode Reader Moderator at OCForums Last edited by Hoot; 03-18-2005 at 10:08 AM. |
|
03-18-2005, 10:22 AM | #154 |
Cooling Savant
Join Date: Apr 2003
Location: 4-sided room with an exit going east, and an exit going south
Posts: 392
|
Why can't we delete our own messages?
__________________
My Watercooling Stuff Last edited by JSimmons; 03-18-2005 at 12:48 PM. |
03-19-2005, 09:06 PM | #155 | |
Cooling Savant
Join Date: Dec 2004
Location: Orlando, Florida
Posts: 383
|
Quote:
Any chance the 1/2" tygon would fit over 3/4" fittings? Would this help flow rates if coupled with an appropriate pump (a mag 5 or an Iwaki 20RLT off the top of my head). :shrug: :shrug: :shrug: |
|
03-23-2005, 04:13 PM | #156 | |
Cooling Savant
Join Date: Feb 2004
Location: W. Sussex, UK
Posts: 329
|
Why not use a fan better suited to watercooling - if one exists?
More airflow = more noise.. but as much pressure as you want, not much niose? What if a over rated (in torque) motor was used, but with a resonably low rpm (for a fan). Its the airflow and bearings that seems to make all of the niose, not the motor? The motor wouldnt slow down much with restriction.. giving the same airflow but capable of several times more restriction.. = better cooling..? And fans are cheaper than rads (I think!). What about blower style fans instead of axial? Or am I compleatly wrong about current fans not being perfect? Also, is there any link between fan thickness and presure ability? Quote:
__________________
Waterblocks Last edited by |kbn|; 03-23-2005 at 04:20 PM. |
|
03-23-2005, 05:14 PM | #157 |
Thermophile
Join Date: Sep 2002
Location: Melbourne, Australia
Posts: 2,538
|
Centrif. blowers have a different optimisation point. They also tend to be a lot noisier than axial fans for the same level of air-flow, and they are not exactly things that can be mounted conveniently inside a case.
Keeping in mind that we want sustained air-flow through the radiator that is at least around 43CFM. 43CFM of air-flow has an inherent C/W of 0.04, meaning that a 0.04 C/W is as good as you can get given perfect heat transfer from the radiator into the air flowing through it. If you take a look around the web, you won't find many blowers that can deliver 43CFM against pressure for low noise, where by "low noise", we're talking about ~20dBA noise levels. If you don find one, chances are it's also a fairly large unit, quite costly, and being run at very low speeds. Remember, we're also talking about cost here. Hard to compete against a ultra-low-noise, small, compact, and light $5 fan with a large, heavy, noisier $50 blower, even if you can argue that the blower is better for pure performance. The whole point with making the radiator larger than the 12cm axial fan was to decrease the air-flow resistance to the point that the low-speed low-noise axial fan is operating very high up on its flow curve. i.e. you don't need the pressures provided by a blower to get good performance out of the radiator. Sure, as Hoot say's, if the radiator is now 16x16cm then let's stick a 15 or 16cm fan on it. Yes - you could do that and get better performance, but what I'm talking about here is extracting the most performance possible for the least effort (on the fan's part) and cost and noise. To me, it just feel right that I'm matching a super-quiet, $5, 1W powered fan to a radiator designed to work with its specific traits, that provides cooling performance that matches larger/noisier setups. Yes - of course we can stick a larger/noisier fan on it, but then that's moving away from what I perceive to be the primary design goal. Match the fan/radiator setup with a super-efficient super-quiet 5-10W pump (my other dream - but 15-25W will have to do for now until that day) and we have a setup that kicks anything else in the teeth quite hard in every respect (less power, less noise, low-space, smaller ID tubin, better cooling, moderate cost). Maybe I should move to Europe. |
03-23-2005, 06:04 PM | #158 | |
Cooling Savant
Join Date: Feb 2004
Location: W. Sussex, UK
Posts: 329
|
Quote:
I know very little about fan, radiator, and watercooling design.. Im just suggesting that instead of low restriction rads, to achive the same with as-quiet fans, but much higher restriction, same noise, but also same airflow. Where you say effecient, what do you mean? efficent in fan power? noise? airflow? I think noise is most important, then air flow.. I couldnt really care how much power it takes within a resonably amount.. as long as the noise and performance are both good. Would having less restriction, make the airflow less effective? much like a single large channel in a waterblock i less restrictive but compared to many smaller ones or jet impingement it performs a lot worse aswell. Im currently using 2x200mm heatercores, with airflow in series, with a 172mm fan which is not THAT noisy. Its rated for 12w - 24v 0.55A (which is noisy!) but I have been running it at 7-10v (At a guess ~3-6w = 6-12v?) which is much much reduced niose - but the bearing used in it are crap.. with good bearings it would be almost silent - I think. What causes noise in a fan? Like a water pump, I think its not so much the actual motor but instead the bearings and the flow rate. .'. keep flow the same, use the worlds best bearings, but chose a motor that is LOW RPM (dont want high pitch whine - I think below 1000RPM, maybe down to 500?!) also over-rated enough so it will require a LOT more restriction to slow it down than your going to get from a few rads in series. Might want a bit more power but are you going to hear any difference.. I think the ideal rad would be 180*180*100, much like my two rads together... *but* also with a higher FPI - how much will that affect performance assuming constant air flow? I want the most airflow, for the least possible RPM, with the most possible pressure. I think low rpm is important in reducing noise caused by bearings? edit: Done some quick tests and I have observed a few things which should be obvious... 1) air restriction does not slow down fan that much, instead the air bounces back through the fan So all I can think of really, is a really wide fan, with blades curved so that they give the maximuim flow and pressure - allowing the RPM to be dropped a lot. .. Anyway.. time for me to let this thread get back to where it was..
__________________
Waterblocks Last edited by |kbn|; 03-23-2005 at 06:32 PM. |
|
03-23-2005, 10:59 PM | #159 | ||
Cooling Savant
Join Date: Dec 2004
Location: Orlando, Florida
Posts: 383
|
Quote:
Quote:
|
||
03-24-2005, 04:29 AM | #160 | ||
Cooling Savant
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
|
Half of the noise generated by a fan/rad combi is from the friction of air passing over the fins. You increase the FPI, the noise level increases also. As either FPI or Core Depth increase, a fan with higher pressure is required to penetrate. Most 120mm fans with higher pressure mean higher noise output due to higher CFM. Higher CFM means more air blown over fins means more frictional noise.
Quote:
Quote:
|
||
03-24-2005, 07:28 AM | #161 | |
Thermophile
Join Date: Sep 2002
Location: Melbourne, Australia
Posts: 2,538
|
Quote:
While I'm on my way to Europe, I should pass by India and pick up a few extra pairs of arms and heads (reference to various Indian deities who seem to have the right idea for the modern world with multiple faces and sets of arms). |
|
03-24-2005, 08:09 AM | #162 |
Cooling Savant
Join Date: May 2003
Location: Wakefield, West Yorkshire, UK
Posts: 486
|
No rush d00d... I know yer workload etc will be keeping u snowed under... am still awaiting 40mm shroud at this end. Will start knocking up test bed based on suggestions earlier in thread and start collecting data... and just remembered to update me sig for clarity!
|
03-24-2005, 09:48 AM | #163 | |
Cooling Savant
Join Date: Feb 2003
Location: USA - Boston area
Posts: 798
|
Quote:
Just guessing here - feel free to slap me silly if you've answers rather than my not-very-useful questions... |
|
03-24-2005, 02:08 PM | #164 | |
Cooling Savant
Join Date: Oct 2004
Location: Twilight Zone
Posts: 152
|
Quote:
Its exciting to see that people are working towards water cooling components that are optomized for computers. |
|
03-24-2005, 06:09 PM | #165 | ||
Cooling Savant
Join Date: Feb 2004
Location: W. Sussex, UK
Posts: 329
|
Quote:
Quote:
__________________
Waterblocks Last edited by |kbn|; 03-24-2005 at 06:16 PM. |
||
03-24-2005, 10:00 PM | #166 |
Cooling Neophyte
Join Date: May 2004
Location: USA
Posts: 13
|
I'm getting ready to strap on 4 new Delta 120mm tri-blade hi-pressure fans onto my Weapon shrouds in a push/pull for my 69-72 chev pickup single pass core.
Nice quiet, hi-pressure fans, give them a try. I love them! Sidewinder has them in stock. |
03-25-2005, 08:44 AM | #167 | |
Cooling Savant
Join Date: Feb 2004
Location: W. Sussex, UK
Posts: 329
|
Quote:
push/pull is pointless for that I think... your cfm wont change much with both fans... your rad wont have that much restriction... You would be better having a double size rad either to double/triple the restriction (then doubling up the fans) or doubling the flow (fans in parrelell).
__________________
Waterblocks |
|
03-25-2005, 10:45 AM | #168 |
Cooling Neophyte
Join Date: Jan 2005
Location: Houston
Posts: 34
|
I'm using a 285mm x 280mm x 19mm (13 or 14 fpi) radiator in a box with 4 120mm Yate Loon low-speed fans. I'm still working on slowing the fans a little more to bring them down to near silence. The MCP350 also needs more sound dampening to eliminate it as a noise source, though really that's not an issue for this thread. The only problem with this radiator is that it's a Derale 8000 series transmission cooler made entirely of aluminum (which is why I asked about aluminum issues in a couple of other recent threads). I got tired of looking for a copper one with these dimensions, so I got this one to use until I can find something made entirely of copper. I don't have the equipment to accurately measure the temperature drop across the radiator, or even just the basic water temperature. I tried measuring it with a cheap thermometer, but the difference was so small it didn't register. When I get time I'm planning to measure the actual voltage for each fan to try to estimate the total airflow. Currently this probably isn't too helpful to this discussion due to the lack actual temp data, but practically speaking, this radiator/fan arrangement is very quiet and appears to be coolig the water to near room temperature.
If you'd like to see pictures, etc, I posted it a few days ago on the SPCR watercooling forum. |
03-25-2005, 02:30 PM | #169 | |
Thermophile
Join Date: Sep 2002
Location: Melbourne, Australia
Posts: 2,538
|
Quote:
Let's express this yet again. By "quiet" - we're talking about getting out of bed at 3am when it's dead silent outside and in the house, everything else in the house is turned off, walking to one's computer, turning it on, and apart from the flashing lights and the monitor, not actually hearing any particular change in the noise level of the room. On that score, Delta fans are positively thunderously loud, even when undervolted. eander315 above is someone who is really seeking silence from their PC. His radiator box is much like mine. Every time I have guests over, they remark that they can't hear my PC, but to me it's still noticably noisy. |
|
03-25-2005, 02:45 PM | #170 |
CoolingWorks Tech Guy Formerly "Unregistered"
Join Date: Dec 2000
Location: Posts: 2,371.493,106
Posts: 4,440
|
"Let's express this yet again. By "quiet" - we're talking about getting out of bed at 3am when it's dead silent outside and in the house, everything else in the house is turned off, walking to one's computer, turning it on, and apart from the flashing lights and the monitor, not actually hearing any particular change in the noise level of the room."
very nice, a good functional description; my goal as well but perilously close to fanless, which translates for the psu as airless offtopic: anyone heard of a psu good for still air ? (i.e. no forced circulation) |
03-25-2005, 02:57 PM | #171 | |
Thermophile
Join Date: Sep 2002
Location: Melbourne, Australia
Posts: 2,538
|
Quote:
Okay for still air if not overvolting stuff. If overvolt/clocking, then yeah - will still need a modicum of air-flow, but in this scenario a 5v Yate-Loon fan should do the trick if set up properly. Pricey PSU's though. >$200. That Zalman heat-pipe based totally silent case is now sold commercially if you want to follow that path.... Again, very pricey - ~$1000. |
|
03-25-2005, 05:05 PM | #172 |
Cooling Neophyte
Join Date: Jan 2005
Location: Houston
Posts: 34
|
You could always add the PSU to the loop if you need 400+ W. It looks like a pain in the rear to modify, will add at least a little restriction, and might add enough heat to require a larger radiator, fan, etc., but it looks like the only totally silent way to run a big power supply. They're available commercially in Germany. Must not be a big enough market in the states yet, unless someone is already working on it
|
03-26-2005, 04:55 AM | #173 | |
Cooling Neophyte
Join Date: Jul 2004
Location: San Francisco
Posts: 54
|
Quote:
Silent PC Review has a decent review of the Phantom. Aaron Spink speaking for myself inc. |
|
03-26-2005, 09:41 AM | #174 | |
Cooling Savant
Join Date: Dec 2004
Location: Orlando, Florida
Posts: 383
|
Quote:
Let's put it this way: Your brand X 12cm fan touts that it pushes 50cfm at 22db. Placing one on top of the other will not help airflow (practically speaking). We all know this. HOWEVER, your radiator, regardless of its design, will restrict airflow. If using a 1" core it might drop your airflow rate 30% (ballpark, depends on FPI) meaning that your fan is only pushing 35cfm. If using a 2" core it might drop your airflow by 60% (ballpark again) meaning that your fan is now pushig only 20cfm. If you have one fan that is pushing, adding a second fan to pull will create an area of low pressure on the opposie side of the core. This area of low pressure assists the pushing fan in blowing air through the radiator. Hypothetically, I'll say this reduces the airflow drop by half, meaning that a 2" core will drop your airflow rates by only 30% (ballpark yet again). Clear? :shrug: |
|
03-26-2005, 11:10 AM | #175 |
Cooling Neophyte
Join Date: Jan 2005
Location: Houston
Posts: 34
|
NMB has an engineering page with several whitepapers and other useful documents. In particular, the Fan Engineering 101 .pdf is full of good information (warning: link points directly to a PDF).
Basically, parallel fans are better in low static pressure situations, while fans run in series are better for high static pressure. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|