Daily Update. - Page 8

pHaestus · 08-21-2003, 02:20 PM

Completely different program JayDee. Try this one:

http://users.ev1.net/~redelm/

jaydee · 08-21-2003, 02:33 PM

That would explain the differences. Thanks, I will be using that in my next projects.

jaydee · 08-21-2003, 10:37 PM

Well my A7V333 turned out to be a dud. So in light of that:

Code:

VGA LEADTEK|GF4 MX440 64M W/TV/RTL  1    $39.00 
MB ASUS A7V8X-X/LAN KT400 RTL  1    $45.00 
SWITCH AOPEN AOW605U SOHO SERIES RT 1    $19.00 
CABLE COMPUCABLEBOOTED 25' GY CAT5E 1    $4.00 
        
  Subtotal $107.00 
  Tax $.00 
Shipping and Handling charge
 8.00 
Total $115.00 
 
 
Step 5 of 5

Needed another switch as my 4 port router is full. I figure the A7V8X-X should be a little better than the A7V333 anyway. I also discovered I only have one card with AGP 2.0 compliance and that is in my Abit KD7. So I had to pick up the cheapest decent card I could find as nothing else fits in these newer boards. Well maybe next week I will have the 5th cruncher going....

jaydee · 08-23-2003, 10:32 PM

Looks like we are loosing some output. We were over 6mill for a while and now just over 5mill a day. Still do good non the less.

We are in the top 20 at 19th position. Looks like we can take over a few more spots aswell.

Keep it up. Welcome to the new members aswell! We now gor 42 members with points on the board!

Joe · 08-24-2003, 02:54 AM

well I woulda been up to 2x 2Ghz Bartons running but I burned a barton up today.. so I am on one CPU for now

jaydee · 08-26-2003, 05:43 PM

Hummm, Sneakers had a 1.8 million point dump today to kick us into 20th spot. Looks like we are still doing pretty good non the less though.

jimmy the fish · 08-27-2003, 04:09 AM

Looks like you've snuck back into 19th place

The big dump yesterday was because two members of Sneakers happened to dump stashed structures at the same time, myself and Barson.

Don't get too comfy at 19th, we're coming for you!

Joe · 08-28-2003, 12:19 AM

Dual 2Ghz Barton love... charging forward

so now my count is.:

1x 1.6Ghz P4 Laptop
2x 2Ghz Bartons
2x 1.8Ghz Xeons (4 DF sessions)
1x 2Ghz P4

Not bad at all

Edit: were at #18 and could be at 16 tomorrow

Aardil · 08-28-2003, 07:49 AM

WOOT!!

Finally broke 1 million !!!!!!!!

Aardil

jaydee · 08-28-2003, 09:32 AM

#16 now. AMDMB (my old team) next up!

Joe · 08-28-2003, 09:49 AM

Quote:

Originally posted by jimmy the fish
Looks like you've snuck back into 19th place

The big dump yesterday was because two members of Sneakers happened to dump stashed structures at the same time, myself and Barson.

Don't get too comfy at 19th, we're coming for you!

hehe I dont think so

satanicoo · 08-28-2003, 11:19 AM

where can i see a list of all team, ordered by position?

jaydee · 08-28-2003, 11:50 AM

Quote:

Originally posted by satanicoo
where can i see a list of all team, ordered by position?

Go here: http://stats.zerothelement.com/cgi-b...s.pl?team=1680

and the left hand colum has a link to "All teams page".

Or go here: http://stats.zerothelement.com/cgi-b...ender-teams.pl

jimmy the fish · 08-28-2003, 11:56 AM

Quote:

Originally posted by Joe
hehe I dont think so

Damn! Yeah there are 3-4 teams all hovering round 110,000,000 of which ProCooling currently has the highest output. Sneakers aren't far behind though ...

Gah! Now i'll have to find *more* machines to fold on!

Joe · 08-28-2003, 12:06 PM

Hmm
seems its time to get some more friends on the deal

satanicoo · 08-28-2003, 02:04 PM

http://stats.zerothelement.com/cgi-b...ender-teams.pl

[H] is gaining points already in fase 3 here.
Should we move there or stay?

EDIT:
oh and Bguinto1 from Ars Technica Team Stir Fry is gaining more point than the entire procooling team!!
I wonder how may pcs he has folding...

Joe · 08-28-2003, 02:27 PM

theres some confusion in your post... we arent folding@home incase you didnt realize.

jaydee · 08-28-2003, 02:55 PM

Yeah go to the links I gave above. Those are to the Distributed Folding teams. The one you have there is Folding@Home. Two different projects.

Phant0m51 · 08-28-2003, 02:58 PM

Ars Technica does both Folding@Home and Distributed Folding. The reason that the main person on Ars Technica gets more points than the entire ProCooling team is because he works as the network administrator at a Hospital, so he has all of those computer folding all day and night.

Joe · 08-28-2003, 03:00 PM

hmm
would suck to see a respirator BSOD cause of DF

Phant0m51 · 08-28-2003, 05:44 PM

AHAHAHAHAHAHAHA That would REALLY suck. He probably only puts it on the client computers, like the ones the doctors type on. Not anything that could possibly kill somebody. Unless they are running Linux, which I don't think they are.

Blackeagle · 08-28-2003, 10:29 PM

Well I finally got around to figuring out what was needed to get the network set up between my own a my daughters PCs.

hers has a dead PCI slot which is what kept screwing me over on several other attempts.

Got to the point I'd tried everything else, including buying a second card for her machine thinking perhaps the one used to hook her up to the cable at collage had gone bad.

But hers will be helping now at times at least. It's been on for the last day or so straight while I did some maintenace of differant kinds on it.

But it will be helping off and on from now on.

Can anyone give me some ideas what could have killed a slot on her Soyo board.??? It worked fine last year for her at collage. Thanks

jaydee · 08-28-2003, 11:03 PM

Quote:

Originally posted by Blackeagle

Can anyone give me some ideas what could have killed a slot on her Soyo board.??? It worked fine last year for her at collage. Thanks

Are you sure it is a dead slot and not just an IRQ conflict preventing the card from working?. Only think I can think off.

bigben2k · 08-28-2003, 11:27 PM

I'd ask your daughter what it is that she accidentally spilled in it, then stare at her with a doubtful eye, as she replies: "I didn't spill anything, I swear!".

ftjandra · 08-28-2003, 11:42 PM

Nevermind, figured out the problem...

I just found out, that my firewall has started blocking one of the clients running on one of my dually machines. So here comes a huge upload from me. I still can't figure out why one client is getting blocked, but not the other ones...

--Ferdi

08-21-2003, 10:37 PM	#178
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Well my A7V333 turned out to be a dud. So in light of that: Code: VGA LEADTEK\|GF4 MX440 64M W/TV/RTL 1 $39.00 MB ASUS A7V8X-X/LAN KT400 RTL 1 $45.00 SWITCH AOPEN AOW605U SOHO SERIES RT 1 $19.00 CABLE COMPUCABLEBOOTED 25' GY CAT5E 1 $4.00 Subtotal $107.00 Tax $.00 Shipping and Handling charge 8.00 Total $115.00 Step 5 of 5 Needed another switch as my 4 port router is full. I figure the A7V8X-X should be a little better than the A7V333 anyway. I also discovered I only have one card with AGP 2.0 compliance and that is in my Abit KD7. So I had to pick up the cheapest decent card I could find as nothing else fits in these newer boards. Well maybe next week I will have the 5th cruncher going....

08-24-2003, 02:54 AM	#180
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	well I woulda been up to 2x 2Ghz Bartons running but I burned a barton up today.. so I am on one CPU for now __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-27-2003, 04:09 AM	#182
jimmy the fish Cooling Neophyte Join Date: Aug 2003 Location: London Posts: 2	Looks like you've snuck back into 19th place The big dump yesterday was because two members of Sneakers happened to dump stashed structures at the same time, myself and Barson. Don't get too comfy at 19th, we're coming for you! __________________ Lethal Hardware

08-28-2003, 12:19 AM	#183
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Dual 2Ghz Barton love... charging forward so now my count is.: 1x 1.6Ghz P4 Laptop 2x 2Ghz Bartons 2x 1.8Ghz Xeons (4 DF sessions) 1x 2Ghz P4 Not bad at all Edit: were at #18 and could be at 16 tomorrow __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-28-2003, 12:06 PM	#190
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Hmm seems its time to get some more friends on the deal __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-21-2003, 02:20 PM	#176
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	Completely different program JayDee. Try this one: http://users.ev1.net/~redelm/

08-21-2003, 02:33 PM	#177
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	That would explain the differences. Thanks, I will be using that in my next projects.

08-23-2003, 10:32 PM	#179
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Looks like we are loosing some output. We were over 6mill for a while and now just over 5mill a day. Still do good non the less. We are in the top 20 at 19th position. Looks like we can take over a few more spots aswell. Keep it up. Welcome to the new members aswell! We now gor 42 members with points on the board!

08-26-2003, 05:43 PM	#181
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Hummm, Sneakers had a 1.8 million point dump today to kick us into 20th spot. Looks like we are still doing pretty good non the less though.

08-28-2003, 07:49 AM	#184
Aardil Cooling Savant Join Date: Oct 2002 Location: Louisiana Posts: 174	WOOT!! Finally broke 1 million !!!!!!!! Aardil

08-28-2003, 09:32 AM	#185
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	#16 now. AMDMB (my old team) next up!

08-28-2003, 11:19 AM	#187
satanicoo Cooling Savant Join Date: Nov 2002 Location: portugal Posts: 635	where can i see a list of all team, ordered by position?

08-28-2003, 02:04 PM	#191
satanicoo Cooling Savant Join Date: Nov 2002 Location: portugal Posts: 635	http://stats.zerothelement.com/cgi-b...ender-teams.pl [H] is gaining points already in fase 3 here. Should we move there or stay? EDIT: oh and Bguinto1 from Ars Technica Team Stir Fry is gaining more point than the entire procooling team!! I wonder how may pcs he has folding...

08-28-2003, 02:27 PM	#192
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	theres some confusion in your post... we arent folding@home incase you didnt realize. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-28-2003, 02:55 PM	#193
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Yeah go to the links I gave above. Those are to the Distributed Folding teams. The one you have there is Folding@Home. Two different projects.

08-28-2003, 02:58 PM	#194
Phant0m51 Cooling Savant Join Date: May 2003 Location: Utah Posts: 160	Ars Technica does both Folding@Home and Distributed Folding. The reason that the main person on Ars Technica gets more points than the entire ProCooling team is because he works as the network administrator at a Hospital, so he has all of those computer folding all day and night.

08-28-2003, 03:00 PM	#195
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	hmm would suck to see a respirator BSOD cause of DF __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

08-28-2003, 05:44 PM	#196
Phant0m51 Cooling Savant Join Date: May 2003 Location: Utah Posts: 160	AHAHAHAHAHAHAHA That would REALLY suck. He probably only puts it on the client computers, like the ones the doctors type on. Not anything that could possibly kill somebody. Unless they are running Linux, which I don't think they are.

08-28-2003, 10:29 PM	#197
Blackeagle Thermophile Join Date: Oct 2002 Location: U.S.A = Michigan Posts: 1,243	Well I finally got around to figuring out what was needed to get the network set up between my own a my daughters PCs. hers has a dead PCI slot which is what kept screwing me over on several other attempts. Got to the point I'd tried everything else, including buying a second card for her machine thinking perhaps the one used to hook her up to the cable at collage had gone bad. But hers will be helping now at times at least. It's been on for the last day or so straight while I did some maintenace of differant kinds on it. But it will be helping off and on from now on. Can anyone give me some ideas what could have killed a slot on her Soyo board.??? It worked fine last year for her at collage. Thanks

08-28-2003, 11:27 PM	#199
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	I'd ask your daughter what it is that she accidentally spilled in it, then stare at her with a doubtful eye, as she replies: "I didn't spill anything, I swear!". __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

08-28-2003, 11:42 PM	#200
ftjandra Cooling Neophyte Join Date: Apr 2002 Location: USA Posts: 36	Nevermind, figured out the problem... I just found out, that my firewall has started blocking one of the clients running on one of my dually machines. So here comes a huge upload from me. I still can't figure out why one client is getting blocked, but not the other ones... --Ferdi __________________ Home of My HTPC and My Plexi-Cube Last edited by ftjandra; 08-28-2003 at 11:53 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)