power for pelts

t-dogisdabomb · 05-08-2001, 06:34 PM

i need to know something, with ondaedg's PSU article, when 24 volt is initiated, is the amperes doubled by the two psu's in series? and another thing, i found a page showing voltages for each wire on the ATX connector and i got 24 volts with it, and i wondered one thing, if my regular +12v line is only 8.0 Amps ( feel free to tell me my PSU sucks, im gettin a new one anyways ) would my my 24v line be running hte amperes or would it be cut in half??? thanks alot guys
http://www.7volts.com/atxnotes.htm is the lin kfor the site with the voltages

resago · 05-09-2001, 11:21 AM

series = volts increase
parallel = amps increase

t-dogisdabomb · 05-09-2001, 02:29 PM

thanks alot
i was thinking, how bout two enermax 631 watt PSU's in series???? my own very first 1261 watt PSU...

can anyone say major pelt time????

resago · 05-09-2001, 04:34 PM

If you do that, consider getting some 5v pelts and make a chiller. you'll need a 5v load anyway. Might as well take advantage of the 44amps you'll have on each of the 5v lines.

05-08-2001, 06:34 PM	#1
t-dogisdabomb Cooling Neophyte Join Date: Feb 2001 Posts: 38	power for pelts i need to know something, with ondaedg's PSU article, when 24 volt is initiated, is the amperes doubled by the two psu's in series? and another thing, i found a page showing voltages for each wire on the ATX connector and i got 24 volts with it, and i wondered one thing, if my regular +12v line is only 8.0 Amps ( feel free to tell me my PSU sucks, im gettin a new one anyways ) would my my 24v line be running hte amperes or would it be cut in half??? thanks alot guys http://www.7volts.com/atxnotes.htm is the lin kfor the site with the voltages

05-09-2001, 11:21 AM	#2
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	series = volts increase parallel = amps increase

05-09-2001, 02:29 PM	#3
t-dogisdabomb Cooling Neophyte Join Date: Feb 2001 Posts: 38	thanks alot i was thinking, how bout two enermax 631 watt PSU's in series???? my own very first 1261 watt PSU... can anyone say major pelt time????

05-09-2001, 04:34 PM	#4
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	If you do that, consider getting some 5v pelts and make a chiller. you'll need a 5v load anyway. Might as well take advantage of the 44amps you'll have on each of the 5v lines.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)