Go Back   Pro/Forums > ProCooling Technical Discussions > Overclocking Tech
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

Overclocking Tech Tips/Tricks/Recomendations to help get the last Mhz out of it!

Reply
Thread Tools
Unread 06-27-2007, 04:48 PM   #1
HammerSandwich
Cooling Savant
 
Join Date: Oct 2003
Location: 15143
Posts: 358
Default OC advice

This post is an offshoot from here.

You can find a fuller description of my system at SPCR. The essential components:
  • Opteron 144
  • Asrock 939Dual-SATA2
  • 2x512MB PQI Turbo (TCCD on Brainpower)
  • Seasonic Super Silencer 350 Rev A3
  • Original Storm/G4
  • 10W DDC
  • Fedco 2-333 heater core
  • Yate Loon D12SL
  • Sunbeam Rheobus for both fan & pump

Something hit a wall at an unexpectedly low level. All claims of "stable" are based on hours of Memtest and/or Prime95. I've run other tests, but not at such length.

The current settings run the Opty with its 9x multiplier at 270FSB for 2.43GHz. This is with the voltage maxed out in BIOS at "1.45V" and CnQ enabled. Speedfan reports only 1.41V. If I disable CnQ, Speedfan shows 1.45V and can run 9x280 for 2.52GHz. RAM voltage is "high", with 3-4-4-8 2T timings.

To test for max mobo FSB, I reduced the CPU multiplier to 5x and the RAM with several dividers. These tests indicated stability at 270-280FSB but not 285-290.

Tests were run with various BIOS versions, including the OCWB betas and official Asrock versions. I can't report significant gains with any of them. Currently running 2.20.

I've experimented with greater cooling. OCs were found with pump & fan at top speed. In addition, I opened my case's bezel for a 4C improvement(!). I also added another 120 aimed at the CPU socket area and DIMMs. Neither of these steps added stability at 285FSB.

Okay, what else can I tell you?
__________________
www.procooling.com: It's true we are often a bunch of assholes
HammerSandwich is offline   Reply With Quote
Unread 06-27-2007, 09:10 PM   #2
jaydee
Put up or Shut Up
 
jaydee's Avatar
 
Join Date: Dec 2001
Location: Spokane WA
Posts: 6,506
Default Re: OC advice

Well I am no OC specialist but sounds to me like you need more voltage in either the RAM or the CPU and maybe both. If that board tops out at 1.45V then maybe a volt mod? Is there a RAM voltage adjustment?

If running it cooler dosn't help then I can only think of voltage. Good luck!
jaydee is offline   Reply With Quote
Unread 06-27-2007, 10:05 PM   #3
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: OC advice

Quote:
Originally Posted by HammerSandwich
  • Opteron 144
  • 2x512MB PQI Turbo (TCCD on Brainpower)
Okay, what else can I tell you?
EEEOWWEEE!
That TCCD should be able to do DDR600 at 3-4-4-6, 1T easy.
Like this TCCD: http://valid.x86-secret.com/show_oc?id=112734
What else can you tell us? Well, that you're going to get a MOBO that will do 1.6 Vcore at least. Without that, it ain't gonna happen. Stock Vcore for an Opti 144 is 1.5-1.55 depending on which one you have
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 06-28-2007, 01:06 PM   #4
HammerSandwich
Cooling Savant
 
Join Date: Oct 2003
Location: 15143
Posts: 358
Default Re: OC advice

Actually, my CPU's stock voltage is 1.35V. But I agree that the mobo is the most likely culprit, at least when combined with the 144's low multiplier. The 939Dual is a great choice for upgrading slowly, but it's clearly not a max-effort OCer's board.
__________________
www.procooling.com: It's true we are often a bunch of assholes
HammerSandwich is offline   Reply With Quote
Unread 06-28-2007, 03:59 PM   #5
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: OC advice

Quote:
Originally Posted by HammerSandwich
Actually, my CPU's stock voltage is 1.35V. But I agree that the mobo is the most likely culprit, at least when combined with the 144's low multiplier. The 939Dual is a great choice for upgrading slowly, but it's clearly not a max-effort OCer's board.
Well, have fun and play nice.
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 06-28-2007, 07:14 PM   #6
HammerSandwich
Cooling Savant
 
Join Date: Oct 2003
Location: 15143
Posts: 358
Default Re: OC advice

Will do. Thanks for the advice. I'll report back in a few months when I build a new rig.
__________________
www.procooling.com: It's true we are often a bunch of assholes
HammerSandwich is offline   Reply With Quote
Unread 01-07-2009, 04:08 AM   #7
spikegomez
Cooling Neophyte
 
Join Date: Jan 2009
Location: Phil
Posts: 1
Default Re: OC advice

Quote:
Originally Posted by HammerSandwich View Post
This post is an offshoot from here.

You can find a fuller description of my system at SPCR. The essential components:
  • Opteron 144
  • Asrock 939Dual-SATA2
  • 2x512MB PQI Turbo (TCCD on Brainpower)
  • Seasonic Super Silencer 350 Rev A3
  • Original Storm/G4
  • 10W DDC
  • Fedco 2-333 heater core
  • Yate Loon D12SL
  • Sunbeam Rheobus for both fan & pump
That is greater that mine... 2x512MB PQI Turbo (TCCD on Brainpower) is their a 1G of this now?





_________________
A cool idea from SEO Test
spikegomez is offline   Reply With Quote
Unread 01-07-2009, 07:09 PM   #8
billbartuska
Cooling Savant
 
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
Default Re: OC advice

Hey!

This thread is over a year and a half old.
__________________
My new rig....
Intel SE440BX-3, PIII 550 (@ 680)
MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180)
Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors
billbartuska is offline   Reply With Quote
Unread 01-07-2009, 08:11 PM   #9
ben333
Uber Pro/Mods
 
ben333's Avatar
 
Join Date: Aug 2007
Location: New Hampshire (USA) Posts: Two hundred somethin
Posts: 432
Default Re: OC advice

Yeah but things are slow man... Though these overclocking tips are probably in less demand now

Bill, its time for some new threads. I'll be posting my recent upgrades soon...
__________________
Pro Slacker
ben333 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:19 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...