New setup (sanity check)

[billbartuska]

Originally Posted by ulairi

On a separate topic - any suggestions on the fill & bleed procedures? Tricks worth knowing? I figure I'll have to do some tilting and flipping of the whole rig (while the pump is off, of course) to dislodge the large pockets. The small stuff - therein lie the trickier stuff, so any help would be appreciated.

Leak test, that will get alot of the air out. Then do th tipping and stuff with the pump on.

[ulairi]

Originally Posted by billbartuska

Leak test, that will get alot of the air out. Then do the tipping and stuff with the pump on.

Makes sense. I suspect there will be some trial & error type stuff with which I'll have to play.