hey LOOK! athlon oc`ed to 1873mhz

spyizme · 03-15-2001, 09:26 AM

http://www16.big.or.jp/~bunnywk/

if im correct they are running the voltage at 2.8v.

damn how can i get the voltage that high.

can someone take a look and explain.

------------------
overclock everything

Squishyface · 03-15-2001, 09:09 PM

The last benchmark they have in that article quotes the cpu memory bandwidth as 903 MB/s?
I guess they are using ddr memory...as far as sdram goes, thats way too high to be realistic...as least i think so.
And I think ddr is much harder to overclock using the fsb. Its much less forgiving than sdr because it oc's 2 Hz for every 1 Hz overclock. Oh well..i guess its possible...but did they cool the memory with liquid nitro too?....Thats the only way i think they could have pulled that off.
The dude's pci slots must have been at 47??...lol. Anything is possible :P

------------------
1.2Tbird @1352 air cooled. Soon to be watercooled :P

Cryonosis · 03-16-2001, 09:24 AM

first off, I'm going to tell you to take any extreme overclock with a grain of salt. There's a thread in the general forum about this stuff.

next, have you heard about the voltage mod for some of the motherboards out there? just soldier a resistor in and you can bump than voltage higher than normal right? wel if you use a lower value resistor you will have a higher end voltage, but a ton of heat to dissapate.

------------------
©×××××§===============
»»»»»»»»Cryonosis«««««««««
©×××××§===============
moderator for Broken Pixel http://www.brokenpixel.com
webmaster of the Kingdom of Ys http://cryonosis.8m.com

spyizme · 03-16-2001, 11:05 AM

yeah there would be alot of heat but if youslap a 172watt pelt and water cool it that should be enough to cool it down.

Joe · 03-16-2001, 11:12 AM

I am just gunna go and buy a Miller Electric Arc welder.. I figure 150Amp should be about enough to power the 1.5ghz Athlon

nutndun · 03-16-2001, 05:30 PM

Quote:

Originally posted by Joe:
I am just gunna go and buy a Miller Electric Arc welder.. I figure 150Amp should be about enough to power the 1.5ghz Athlon

LOL! that would definately power it, and probably the house too! Gave me a chuckle since I stick weld pretty often.

------------------
AMD TB 1Ghz@1310
MSI pro2a
Mushkin Rev2 256mb
Creative Gforce GTS
Watercooled

Spdoe · 03-20-2001, 12:07 AM

certainly is DDR ram! I think that site known for real overclocks pretty good. I am pretty sure this is a "flash overclocker" i.e it probably won't last 5 minutes.

Cryonosis · 03-20-2001, 01:12 PM

you guys didn't read what used to overclock did you? he claims he results are from liquid nitrogen cooling. so the overclock is believable and very much a flash overclock. heh, would like to see him get that computer to run for 24hrs straight, cost a fortune there.

Mobius · 04-17-2001, 01:27 PM

Did you also notice they are pouring the liquid nitrogen into the styrofoam cup while *barefoot*. I would be wearing my Mighty Insulated Boots (tm)

This was a flash overclock, they ran the benchmarks in the 10 minutes the system stayed under -20 C.

Mobius

03-15-2001, 09:26 AM	#1
spyizme Cooling Neophyte Join Date: Mar 2001 Location: new york, new york, usa Posts: 30	hey LOOK! athlon oc`ed to 1873mhz http://www16.big.or.jp/~bunnywk/ if im correct they are running the voltage at 2.8v. damn how can i get the voltage that high. can someone take a look and explain. ------------------ overclock everything

03-20-2001, 12:07 AM	#7
Spdoe Cooling Neophyte Join Date: Mar 2001 Location: UK Posts: 1	certainly is DDR ram! I think that site known for real overclocks pretty good. I am pretty sure this is a "flash overclocker" i.e it probably won't last 5 minutes. __________________ <A HREF="http://www.spodesabode.com " TARGET=_blank>http://www.spodesabode.com </A> "Why, oh WHY didn't I take the BLUE pill"

03-20-2001, 01:12 PM	#8
Cryonosis Cooling Savant Join Date: Nov 2000 Location: Idaho, and that's all your gonna get : ) Posts: 101	you guys didn't read what used to overclock did you? he claims he results are from liquid nitrogen cooling. so the overclock is believable and very much a flash overclock. heh, would like to see him get that computer to run for 24hrs straight, cost a fortune there. __________________ ©×××××§=============== »»»»»»»»Cryonosis««««««««« ©×××××§=============== moderator for Broken Pixel http://www.brokenpixel.com webmaster of the Kingdom of Ys http://cryonosis.8m.com

03-15-2001, 09:09 PM	#2
Squishyface Cooling Neophyte Join Date: Feb 2001 Location: columbus, Ohio, USA Posts: 54	The last benchmark they have in that article quotes the cpu memory bandwidth as 903 MB/s? I guess they are using ddr memory...as far as sdram goes, thats way too high to be realistic...as least i think so. And I think ddr is much harder to overclock using the fsb. Its much less forgiving than sdr because it oc's 2 Hz for every 1 Hz overclock. Oh well..i guess its possible...but did they cool the memory with liquid nitro too?....Thats the only way i think they could have pulled that off. The dude's pci slots must have been at 47??...lol. Anything is possible :P ------------------ 1.2Tbird @1352 air cooled. Soon to be watercooled :P

03-16-2001, 09:24 AM	#3
Cryonosis Cooling Savant Join Date: Nov 2000 Location: Idaho, and that's all your gonna get : ) Posts: 101	first off, I'm going to tell you to take any extreme overclock with a grain of salt. There's a thread in the general forum about this stuff. next, have you heard about the voltage mod for some of the motherboards out there? just soldier a resistor in and you can bump than voltage higher than normal right? wel if you use a lower value resistor you will have a higher end voltage, but a ton of heat to dissapate. ------------------ ©×××××§=============== »»»»»»»»Cryonosis««««««««« ©×××××§=============== moderator for Broken Pixel http://www.brokenpixel.com webmaster of the Kingdom of Ys http://cryonosis.8m.com

03-16-2001, 11:05 AM	#4
spyizme Cooling Neophyte Join Date: Mar 2001 Location: new york, new york, usa Posts: 30	yeah there would be alot of heat but if youslap a 172watt pelt and water cool it that should be enough to cool it down.

03-16-2001, 11:12 AM	#5
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	I am just gunna go and buy a Miller Electric Arc welder.. I figure 150Amp should be about enough to power the 1.5ghz Athlon

04-17-2001, 01:27 PM	#9
Mobius Cooling Neophyte Join Date: Apr 2001 Posts: 1	Did you also notice they are pouring the liquid nitrogen into the styrofoam cup while barefoot. I would be wearing my Mighty Insulated Boots (tm) This was a flash overclock, they ran the benchmarks in the 10 minutes the system stayed under -20 C. Mobius

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)