New to Water/Liquid Cooling, Help with Set-up

bodyrocka03 · 07-25-2010, 02:28 PM

Hey everyone! I’m new to the forums here so forgive me if I’m posting incorrectly. I haven’t built a rig in about 5 years so I’m a little slow when it comes to the new tech in some areas. Hence the reason why I have a few questions about liquid cooling and my set-up I have en-route. First off, my rig consists of the following:

CASE: HAF 932
MOBO: MSI Big Bang X-Power X58
CPU: Intel Core i7 930
MEM: G.SKILL PI + Turbulence II 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) 6-9-6-24
HDD: WD Black 1TB 7200RPM 64MB Cache SATA 6.0gbs (SSD in the near future for boot)
GPU: EVGA GTX 480 Super Clocked
OPTICAL: LG Black 10X Blu-ray Burner SATA
PSU: Corsair TX850W
LIQUID COOLING:
CPU BLOCK: XSPC Delta V3 (Acetal)
GPU BLOCK: EK-FC480 GTX
RES and PUMP: X2O 750 Dual 5.25” Bay Reservoir Pump (750 ml/hr)
RAD: Black Ice GTX 480 Extreme
OTHER: NZXT Sentry LX Fan Controller (controls 5 fans, will do each fan in case individually controlled, then all 4 rad fans on one)

My question is, will this setup be sufficient to cool both the CPU and GPU? I planned on the rotation being set up like so: pump/res cpugpuradpump/res. Any other suggestions? Also, does anyone have any mounting solutions to this huge friggin rad? I work in metal fabrication so I thought about making a stand where I can mount the rad on the bottom, or possibly fabricate a mount for the back of the case.

Any help would be great!!!

jaydee · 07-27-2010, 11:48 PM

Air cooling would have been sufficient.

I think you have the setup pretty well figured out and it should cool it all off just fine. As for rad placement I don't like the back of the computer because the PSU and case fans outlet there and you have all your connectors plugged in there (unless you can mount it sideways). Rads a the hardest part to fit. Good luck.

07-25-2010, 02:28 PM	#1
bodyrocka03 Cooling Neophyte Join Date: Jul 2010 Location: Keller, TX Posts: 1	New to Water/Liquid Cooling, Help with Set-up Hey everyone! I’m new to the forums here so forgive me if I’m posting incorrectly. I haven’t built a rig in about 5 years so I’m a little slow when it comes to the new tech in some areas. Hence the reason why I have a few questions about liquid cooling and my set-up I have en-route. First off, my rig consists of the following: CASE: HAF 932 MOBO: MSI Big Bang X-Power X58 CPU: Intel Core i7 930 MEM: G.SKILL PI + Turbulence II 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) 6-9-6-24 HDD: WD Black 1TB 7200RPM 64MB Cache SATA 6.0gbs (SSD in the near future for boot) GPU: EVGA GTX 480 Super Clocked OPTICAL: LG Black 10X Blu-ray Burner SATA PSU: Corsair TX850W LIQUID COOLING: CPU BLOCK: XSPC Delta V3 (Acetal) GPU BLOCK: EK-FC480 GTX RES and PUMP: X2O 750 Dual 5.25” Bay Reservoir Pump (750 ml/hr) RAD: Black Ice GTX 480 Extreme OTHER: NZXT Sentry LX Fan Controller (controls 5 fans, will do each fan in case individually controlled, then all 4 rad fans on one) My question is, will this setup be sufficient to cool both the CPU and GPU? I planned on the rotation being set up like so: pump/res cpugpuradpump/res. Any other suggestions? Also, does anyone have any mounting solutions to this huge friggin rad? I work in metal fabrication so I thought about making a stand where I can mount the rad on the bottom, or possibly fabricate a mount for the back of the case. Any help would be great!!!

07-27-2010, 11:48 PM	#2
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Re: New to Water/Liquid Cooling, Help with Set-up Air cooling would have been sufficient. I think you have the setup pretty well figured out and it should cool it all off just fine. As for rad placement I don't like the back of the computer because the PSU and case fans outlet there and you have all your connectors plugged in there (unless you can mount it sideways). Rads a the hardest part to fit. Good luck.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)