Will this setup work?

gyllerman@gmail · 07-21-2008, 04:36 PM

-

ben333 · 07-21-2008, 07:34 PM

Does it cool your CPU and GPU fanlessly already? Thats pretty impressive, what temps are you getting? I wouldn't waste my money on a steel harddrive block... You can't overclock a hard drive and they usually don't get too hot in a well vented case so I wouldn't bother watercooling it. If the pumps have different flow ratings I think its possible they can damage something so you'd probobly want to replace the one you have or add an identical one. For quiet and powerful I'd recommend a mcp655 but they are a bit pricey.

billbartuska · 07-22-2008, 03:59 AM

Quote:

Originally Posted by gyllerman@gmail

Zalman Reserator 2 hooked up that cools my CPU and GPU ...and (8800Ultra).

Yes, I too am very curious about what temps you are seeing with a heavy load (Orthos, small FFT) on your system.

I think THIS will do the trick...

Be aware that HDDs dissipate most of their heat through the sides, not the top/bottom.And some recent testing (on very large server systems) has indicated that, so long as temps are within the manufacturer's spec, higher temps result in longer HDD life.

...because I will have a 120mm fan blowing some fresh air on it.

Why would you want a fan blowing on a watercooled component. I think that would be kind of useless.

So what I had in mind now was to add in an extra pump. Just a very small one,

Be aware that all pumps add heat. You'd be better off just replacing the existing Zalman with a larger pump. There are many posts on many watercooling forums about modding the Zalman Reserator.

Zalman > CPU > GPU > New Small Pump > HDD > HDD >

When you add a pump in series with an existing pump, where in the loop you place it has no effect. Put it anywhere you like.

...and welcome to Procooling

gyllerman@gmail · 07-22-2008, 05:17 AM

-

HammerSandwich · 07-22-2008, 07:56 AM

Measure your current water temps before you spend $100+ on HD blocks.

gyllerman@gmail · 08-04-2008, 01:02 PM

-

07-21-2008, 04:36 PM	#1
gyllerman@gmail Cooling Neophyte Join Date: Jul 2008 Location: Space Posts: 3	Will this setup work? - Last edited by gyllerman@gmail; 01-05-2010 at 08:22 PM.

07-21-2008, 07:34 PM	#2
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Will this setup work? Does it cool your CPU and GPU fanlessly already? Thats pretty impressive, what temps are you getting? I wouldn't waste my money on a steel harddrive block... You can't overclock a hard drive and they usually don't get too hot in a well vented case so I wouldn't bother watercooling it. If the pumps have different flow ratings I think its possible they can damage something so you'd probobly want to replace the one you have or add an identical one. For quiet and powerful I'd recommend a mcp655 but they are a bit pricey. __________________ Pro Slacker

07-22-2008, 05:17 AM	#4
gyllerman@gmail Cooling Neophyte Join Date: Jul 2008 Location: Space Posts: 3	Re: Will this setup work? - Last edited by gyllerman@gmail; 01-05-2010 at 08:22 PM.

07-22-2008, 07:56 AM	#5
HammerSandwich Cooling Savant Join Date: Oct 2003 Location: 15143 Posts: 358	Re: Will this setup work? Measure your current water temps before you spend $100+ on HD blocks. __________________ www.procooling.com: It's true we are often a bunch of assholes

08-04-2008, 01:02 PM	#6
gyllerman@gmail Cooling Neophyte Join Date: Jul 2008 Location: Space Posts: 3	Re: Will this setup work? - Last edited by gyllerman@gmail; 01-05-2010 at 08:22 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)