Peltiers vs. water cooling

GJTM8 · 10-04-2000, 06:56 PM

I now have a 72w peltier running -6 Idle
and 60 under full load,temps are Farenheit.
Can anybody give me an idea how much colder a
peltier w/ water cooling would be.
Rough estimate is fine.

Joe · 10-05-2000, 04:36 PM

Your performance would blow away what any HSF can do.

H2O rigs really rock with pelts, they arent too much better in a just cpu to waterblock setup. But in a CPU to Pelt(s) to Waterblock they rock. a H2O kit can scale to pull easily 10x the heat away from a hot component then a HSF.

I would say you could keepit at a steady 10 - 15 at full load, and prolly -10 to -20+ at idle. Pelts + Watercooling = Real Cooling system. it all depends on the components you use in yer rig. Overclock-watercool.com has a ton of some of the most impressive gear I have used.

------------------
C-ya
Joe

GJTM8 · 10-07-2000, 08:30 AM

Thanx, I guess I have no choice!

------------------

10-29-2000, 02:40 PM

as an example of what active liquid cooling will give you when properly matched with TEC's consider this picture....

rather extreme, i have to admit, but then I would not want it any other way

Kevin · 11-27-2000, 01:00 AM

Your temps under load should be around zero w/ H2O cooling. What kind of hsf are you using now? Alpha?

Freakyfrank · 02-09-2001, 02:41 PM

hey rotor

youre the same as 3rotor????

------------------
OC'ing is my middlename

10-04-2000, 06:56 PM	#1
GJTM8 Cooling Neophyte Join Date: Oct 2000 Location: TAYLORS SC USA Posts: 2	Peltiers vs. water cooling I now have a 72w peltier running -6 Idle and 60 under full load,temps are Farenheit. Can anybody give me an idea how much colder a peltier w/ water cooling would be. Rough estimate is fine.

10-05-2000, 04:36 PM	#2
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Your performance would blow away what any HSF can do. H2O rigs really rock with pelts, they arent too much better in a just cpu to waterblock setup. But in a CPU to Pelt(s) to Waterblock they rock. a H2O kit can scale to pull easily 10x the heat away from a hot component then a HSF. I would say you could keepit at a steady 10 - 15 at full load, and prolly -10 to -20+ at idle. Pelts + Watercooling = Real Cooling system. it all depends on the components you use in yer rig. Overclock-watercool.com has a ton of some of the most impressive gear I have used. ------------------ C-ya Joe

10-07-2000, 08:30 AM	#3
GJTM8 Cooling Neophyte Join Date: Oct 2000 Location: TAYLORS SC USA Posts: 2	Thanx, I guess I have no choice! ------------------

10-29-2000, 02:40 PM	#4
#Rotor Guest Posts: n/a	as an example of what active liquid cooling will give you when properly matched with TEC's consider this picture.... rather extreme, i have to admit, but then I would not want it any other way

11-27-2000, 01:00 AM	#5
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Your temps under load should be around zero w/ H2O cooling. What kind of hsf are you using now? Alpha?

02-09-2001, 02:41 PM	#6
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	hey rotor youre the same as 3rotor???? ------------------ OC'ing is my middlename

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)