Dry Ice, first steps

Loquillo · 02-10-2006, 12:18 PM

This thread is just to show you our first experiment with dry ice.

First results

We used a SanDiego 3700+. Unfortunately, we didn’t achieve the overclock level that we expected. This was our best result

http://valid.x86-secret.com/show_oc?id=67602

since the processor turned out to be very unstable with a higher fsb.

Anyway, we feel quite happy with what we got ( –49° in a hot summer day, with a room temperature of 36.5° C). This is a good incentive for us to get a better processor and see how far we can go.
After more than 7 hours, there was no condensation anywhere, so we’re pretty satisfied about this too.

If you want to see how this pot was built, go here

http://www.tortugahard.com/foro/view...er=asc&start=0

We’d like to know your comments and opinions, as we don’t have much experience on this matter.

Brians256 · 02-10-2006, 02:53 PM

No condensation? I would have expected some condensation on the motherboard just because of heat conduction through the copper traces.

BGP Spook · 02-10-2006, 03:45 PM

Buenos Aires is on (or near?) the coast as well. Wouldn't it be humid?

Loquillo · 02-10-2006, 09:40 PM

Yes, Buenos Aires is on the coast. Usually, it´s very humid. I can´t remember how humid it was that day, though.

02-10-2006, 12:18 PM	#1
Loquillo Cooling Neophyte Join Date: Feb 2004 Location: www.tortugahard.com Posts: 11	Dry Ice, first steps This thread is just to show you our first experiment with dry ice. First results We used a SanDiego 3700+. Unfortunately, we didn’t achieve the overclock level that we expected. This was our best result http://valid.x86-secret.com/show_oc?id=67602 since the processor turned out to be very unstable with a higher fsb. Anyway, we feel quite happy with what we got ( –49° in a hot summer day, with a room temperature of 36.5° C). This is a good incentive for us to get a better processor and see how far we can go. After more than 7 hours, there was no condensation anywhere, so we’re pretty satisfied about this too. If you want to see how this pot was built, go here http://www.tortugahard.com/foro/view...er=asc&start=0 We’d like to know your comments and opinions, as we don’t have much experience on this matter. __________________ www.tortugahard.com Last edited by Loquillo; 06-28-2007 at 01:50 PM.

02-10-2006, 02:53 PM	#2
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: Dry Ice, first steps No condensation? I would have expected some condensation on the motherboard just because of heat conduction through the copper traces.

02-10-2006, 03:45 PM	#3
BGP Spook Cooling Savant Join Date: Sep 2005 Location: Virginia Posts: 153	Re: Dry Ice, first steps Buenos Aires is on (or near?) the coast as well. Wouldn't it be humid? __________________ I can't spell, but I am working on it.

02-10-2006, 09:40 PM	#4
Loquillo Cooling Neophyte Join Date: Feb 2004 Location: www.tortugahard.com Posts: 11	Re: Dry Ice, first steps Yes, Buenos Aires is on the coast. Usually, it´s very humid. I can´t remember how humid it was that day, though. __________________ www.tortugahard.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)