Watercool temp

derraa · 02-15-2002, 09:19 PM

I was wondering, do you guys think I am getting good enough results? I get 29.5C Idle, 32.3 Load, on a tbird1000@1333 1.85v ambient 21.3. These temps are with my DD5. My radiator is an aquacoil with a delta 130cfm running at 7v. thanks

Brad · 02-15-2002, 10:05 PM

those are good temps, but I do think they are optimistic, I guess you are using an onboard temp probe?

derraa · 02-15-2002, 10:09 PM

I am using a digidoc thermal probe next to the core. It is an Ice flow prototype block.

02-15-2002, 09:19 PM	#1
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	Watercool temp I was wondering, do you guys think I am getting good enough results? I get 29.5C Idle, 32.3 Load, on a tbird1000@1333 1.85v ambient 21.3. These temps are with my DD5. My radiator is an aquacoil with a delta 130cfm running at 7v. thanks

02-15-2002, 10:05 PM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	those are good temps, but I do think they are optimistic, I guess you are using an onboard temp probe? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-15-2002, 10:09 PM	#3
derraa Cooling Neophyte Join Date: Jan 2002 Location: RI (no, we are not part of NY) Posts: 95	I am using a digidoc thermal probe next to the core. It is an Ice flow prototype block.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)