View Single Post
Unread 08-18-2012, 01:35 PM   #9
blue68f100
Thermophile
 
blue68f100's Avatar
 
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
Default Re: Introduction & A Few Questions

If you only have 512 meg of ram that's way to low for the current GOS. It was fine for version 3 and older. You need a min of 1gig, and it's preferred to have the same mfg and size in all used slots.

Your transfer speeds should be a min of 30 like Andy said.

Make sure you don't have some old hardware knocking your buss speed down on your network. Some old switches do not like adding a 10/100 to the works.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5,
1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5,
1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy

Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820
blue68f100 is offline   Reply With Quote