First go here:
http://forums.procooling.com/vbb/showthread.php?t=13820
Post #1
FAQ's for Specific Models
1x00 FAQ
2. My HD has failed. How do I replace it?
A. The 1000v1 has the OS stored in flash ram, just install the hd. It takes about 10 min before you can connect to the web interface.
B. If you have a 1000v2 or 1100 you must transfer the boot tracks from a working unit or by the use of image files. There are 2 different image files used to recover from a failed drive in the 1x00's.
C. The 1000's normally use a 1000 image file, but if you get a 1 x 2 LED blinking pattern it requires the 2200.img file.
D. The 1000v2 & 1100 requires an image file to be copied to the new drive. (Normally the 2200 image file)
Note: You need to reinstall the OS after doing an image file recovery to replace any missing OS files.
Then go here:
http://forums.procooling.com/vbb/showthread.php?t=15648
regards...