Finally finished my WC setup

Inaba · 12-09-2004, 12:41 AM

I finally finished my Water cooling setup. I'm pretty pleased with how it came out. Let me know what ya'll think:

DD TDX
Liang D4
Silverprop HL
Tygon 3/8"
Black Ice eXtreme III
Panaflo's on the radiator
Generic fans on the case

The rest of the pics can be found here:

http://www.dctournament.com/wcpc/firstpc/index.html

Etacovda · 12-09-2004, 01:28 AM

Nice, but im really not a fan of the round window.

MadHacker · 12-09-2004, 03:07 AM

Quote:

Originally Posted by Etacovda

Nice, but im really not a fan of the round window.

That's ok... you realy don't need to have one in your pc.
but others can enjoy them.

What kind of case is that?

XTATDSM · 12-09-2004, 05:35 AM

looking good bro

superart · 12-09-2004, 06:12 AM

Nice loking setup.

The voltage globe looks cool, but doesnt it obstruct the incoming airflow?

What case is that? It looks really unique with the PSU on the bottom and seems like it has a lot of room in there.

Thanks.

Inaba · 12-09-2004, 09:44 AM

Yeah, I'm not happy with how that round window came out. If I had it to do over, I would have made it a bit smaller and repositioned it so you just see the plasma globe. I basically screwed up on that is the bottom line.

The case is a Lian-Li 1200B. Since that zone only has the hard drives generating heat (there is no air path to anything other than the HD's and the PS, which has it's own fans), the fan doesn't do a whole lot, and only turns on briefly if the hard drives get too hot, otherwise it's 99% idle.

The rear fan in the case has never turned on since there's no heat geration in the case to speak of and any small amount of heat is sucked out of the power supply and exhausted in the back. The radiator fans are pulling, so they handle pretty much any excess heat build up in the case and push it out the sides/back/front.

Ruiner · 12-09-2004, 09:58 AM

Very nice bling factor.
What panaflo fans are those and at what voltage?
What's the overall noise level like?

12-09-2004, 01:28 AM	#2
Etacovda Cooling Savant Join Date: Feb 2004 Location: Dunedin NZ Posts: 735	Nice, but im really not a fan of the round window. __________________ Hypocritical Signature I tried to delete: Procooling: where scientific principles are ignored because big corporations are immune to mistakes and oversights.

12-09-2004, 06:12 AM	#5
superart Cooling Savant Join Date: Mar 2002 Location: FL Posts: 787	Nice loking setup. The voltage globe looks cool, but doesnt it obstruct the incoming airflow? What case is that? It looks really unique with the PSU on the bottom and seems like it has a lot of room in there. Thanks. __________________ When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer.

12-09-2004, 05:35 AM	#4
XTATDSM Cooling Neophyte Join Date: Nov 2004 Location: UAE Posts: 26	looking good bro

12-09-2004, 09:44 AM	#6
Inaba Cooling Neophyte Join Date: Sep 2004 Location: Kansas Posts: 9	Yeah, I'm not happy with how that round window came out. If I had it to do over, I would have made it a bit smaller and repositioned it so you just see the plasma globe. I basically screwed up on that is the bottom line. The case is a Lian-Li 1200B. Since that zone only has the hard drives generating heat (there is no air path to anything other than the HD's and the PS, which has it's own fans), the fan doesn't do a whole lot, and only turns on briefly if the hard drives get too hot, otherwise it's 99% idle. The rear fan in the case has never turned on since there's no heat geration in the case to speak of and any small amount of heat is sucked out of the power supply and exhausted in the back. The radiator fans are pulling, so they handle pretty much any excess heat build up in the case and push it out the sides/back/front.

12-09-2004, 09:58 AM	#7
Ruiner Cooling Savant Join Date: May 2003 Location: New Smyrna, FL Posts: 258	Very nice bling factor. What panaflo fans are those and at what voltage? What's the overall noise level like?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)