suggestions plz on this waterr loop

coldy81 · 01-02-2006, 12:05 PM

please give me suggestions or modifications enabling me to optimize this loop.
thanks

bigben2k · 01-02-2006, 12:20 PM

You ought to try running all the blocks in series (i.e. one loop); with a Hydor L30, you have enough pumping power to do it, and it'll probably run a bit better.

Get rid of the elbow at the pump intake; it's restricting.

gmat · 01-03-2006, 05:28 AM

yes dont put an elbow there
and try to keep the rad below the res level, or else your actual reservoir will be your rad (meaning trapped air, the need to tip over your case when bleeding / refilling..)

coldy81 · 01-03-2006, 07:15 AM

thanks a lot guys

coldy81 · 01-03-2006, 11:53 AM

here is the real pics

01-02-2006, 12:20 PM	#2
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Re: suggestions plz on this waterr loop You ought to try running all the blocks in series (i.e. one loop); with a Hydor L30, you have enough pumping power to do it, and it'll probably run a bit better. Get rid of the elbow at the pump intake; it's restricting. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

01-03-2006, 05:28 AM	#3
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	Re: suggestions plz on this waterr loop yes dont put an elbow there and try to keep the rad below the res level, or else your actual reservoir will be your rad (meaning trapped air, the need to tip over your case when bleeding / refilling..)

01-03-2006, 07:15 AM	#4
coldy81 Cooling Neophyte Join Date: Jun 2005 Location: cairo Posts: 11	Re: suggestions plz on this waterr loop thanks a lot guys

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)