the waterblock i'v been workin on!

maskedgeek · 05-03-2002, 09:34 AM

this block is milled with a cnc at my school(that thing is TINY) but heres some pics, dont have it finished yet, i mite hafta wait till monday to finish it

maskedgeek · 05-03-2002, 09:35 AM

another

i can see myself!

maskedgeek · 05-03-2002, 09:36 AM

heres what it looks like from the top(better view)

im also gonna revize the design and make an aluminum one(copper SUCKS to mill!)

webmedic · 05-03-2002, 10:05 AM

Who let you out of the cage at overclockers?

maskedgeek · 05-03-2002, 10:17 AM

lol, im still there,

webmedic · 05-03-2002, 10:20 AM

So how does that thing perform?

maskedgeek · 05-03-2002, 10:40 AM

like i said, ill finish monday, i gotta cut the top on the bansaw and drill some holes on the drill press

Cyco-Dude · 05-03-2002, 11:13 AM

looks sweet do0d. how wide / deep are the channels tho? how thick is the base?

finish that bastard and post some numbers

(a comparison to a maze2 / 3 would be sweet).

maskedgeek · 05-03-2002, 11:22 AM

well the base is .25in thick the channel is .25deep and the width of the channels is 3/16in

i cant get it finished till monday need drillpress....and bansaw

jag_e_fattig · 05-03-2002, 11:28 AM

looks good, hope it works good

Brad · 05-03-2002, 04:47 PM

looks nice, are you a bit afraid that a lot of the water will go through the outer channel and not to the centre of the block?

Fixittt · 05-03-2002, 08:18 PM

why not show us the mill it was machined on as well, at least I would be interested in seeing it.

jaydee · 05-03-2002, 08:47 PM

Quote:

Originally posted by Fixittt
why not show us the mill it was machined on as well, at least I would be interested in seeing it.

Likewise, I bet it is bigger than mine!!!

Cyco-Dude · 05-03-2002, 09:52 PM

brad, look at the path again. it goes in the mid, splits into 2 separate channels, then meets up again @ the other end

maskedgeek, it doesnt look like there will be room for the fittings. what size fittings are you planning on using anyway?

maskedgeek · 05-03-2002, 11:40 PM

Quote:

Originally posted by Fixittt
why not show us the mill it was machined on as well, at least I would be interested in seeing it.

the mill looks similar to yours, but its encased in a box type thing and i think its called "spectralight" yea thats the name

i was gonna get a pic or 2 but noone had their digi cam with that day, and the pics i tried to get the other day, for some reason didnt go, but when i mill a aluminum one ill try to get pics!

and the fittings, actually they are very far apart.....
thats the wood i tested the design on.... and i didnte get around to milling that middle section out...

Brad · 05-03-2002, 11:41 PM

see the red one has a much much much longer and more restrictive path

maskedgeek · 05-03-2002, 11:45 PM

TURBULENCE

(sp?)heh

Cyco-Dude · 05-04-2002, 12:16 AM

i wouldnt mill the center out...id leave it the way it is (might make the channels bigger / deeper in increase flowrate tho)

to Brad, im still not understanding what youre talking about lol. what about the red part? the red part leads to the green part; its a continuous channel. im confoozed :shrug:

maskedgeek · 05-04-2002, 12:21 AM

on the second one i do, im gonna make that island a little smaller, and increase the width of them walls(not the wide ones) becuase they are SOOOOO THIN!

Brad · 05-04-2002, 12:27 AM

now that I've seen the pic that masked geek uploaded, I get the idea of where he will be putting the barbs, not in the places I had guessed

Cyco-Dude · 05-04-2002, 12:39 AM

yeah, some of those wall look very thin (too thin). maybe make the island thinner, but leave it intact? or just do a buttload of different styles (if you're making em outta aluminum now) and see what works best.

oh, what are the outter dimensions of the block? (L, W, H)

maskedgeek · 05-04-2002, 09:14 AM

oooh that block is 2x3x.5in the channel is .25in deep,(except were the mill cough and snapped off(around.375))

and yes, the inner island is .25in wide, itll be like 1/8 or so and the walls near that will be as thick as the other ones hopefully

maskedgeek · 05-07-2002, 07:53 AM

well guys, my wb blew the gemini off the chart! (or got in first)

i have 21c water and 27c cpu wow! its now .09 c/w but last nite it was .125c/w

ok maby something is rong, this is full load also! i did put a thermister next to my core and thats were im getting the 27c and a soil probe in my water wich is were i get the 21c so maby it is rite!

EDIT: Hoot from ocforums lives near me, and he is gonna test it and compare it to the rest of the top dog blocks(gemini, maze 2 swiftech z4.....)

maskedgeek · 05-09-2002, 08:27 PM

well guys, i reseated my wb and made the probe not touch the wb, so it only touches the core, and im still getting the same results! .1 c/w!

maskedgeek · 05-09-2002, 08:29 PM

oh i havent posted pics of the finished product!

ill be getting some awesome pics tomoro of it in my system and my system.......

05-03-2002, 10:05 AM	#4
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	Who let you out of the cage at overclockers? __________________ www.water-cool.com

05-03-2002, 10:20 AM	#6
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	So how does that thing perform? __________________ www.water-cool.com

05-03-2002, 11:28 AM	#10
jag_e_fattig Cooling Savant Join Date: Mar 2002 Location: SoCal, formerly Sweden. Posts: 110	looks good, hope it works good __________________ Tearing it up AER - 05/29/87-10/26/03, I'll never forget.

05-03-2002, 04:47 PM	#11
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,176	looks nice, are you a bit afraid that a lot of the water will go through the outer channel and not to the centre of the block? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-03-2002, 08:18 PM	#12
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	why not show us the mill it was machined on as well, at least I would be interested in seeing it. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

05-03-2002, 10:17 AM	#5
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	lol, im still there,

05-03-2002, 10:40 AM	#7
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	like i said, ill finish monday, i gotta cut the top on the bansaw and drill some holes on the drill press

05-03-2002, 11:13 AM	#8
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	looks sweet do0d. how wide / deep are the channels tho? how thick is the base? finish that bastard and post some numbers (a comparison to a maze2 / 3 would be sweet).

05-03-2002, 11:22 AM	#9
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	well the base is .25in thick the channel is .25deep and the width of the channels is 3/16in i cant get it finished till monday need drillpress....and bansaw

05-03-2002, 09:52 PM	#14
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	brad, look at the path again. it goes in the mid, splits into 2 separate channels, then meets up again @ the other end maskedgeek, it doesnt look like there will be room for the fittings. what size fittings are you planning on using anyway? Last edited by Cyco-Dude; 05-03-2002 at 09:54 PM.

05-03-2002, 11:45 PM	#17
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	TURBULENCE (sp?)heh

05-04-2002, 12:16 AM	#18
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	i wouldnt mill the center out...id leave it the way it is (might make the channels bigger / deeper in increase flowrate tho) to Brad, im still not understanding what youre talking about lol. what about the red part? the red part leads to the green part; its a continuous channel. im confoozed :shrug:

05-04-2002, 12:21 AM	#19
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	on the second one i do, im gonna make that island a little smaller, and increase the width of them walls(not the wide ones) becuase they are SOOOOO THIN!

05-04-2002, 12:27 AM	#20
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,176	now that I've seen the pic that masked geek uploaded, I get the idea of where he will be putting the barbs, not in the places I had guessed __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-04-2002, 12:39 AM	#21
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	yeah, some of those wall look very thin (too thin). maybe make the island thinner, but leave it intact? or just do a buttload of different styles (if you're making em outta aluminum now) and see what works best. oh, what are the outter dimensions of the block? (L, W, H)

05-04-2002, 09:14 AM	#22
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	oooh that block is 2x3x.5in the channel is .25in deep,(except were the mill cough and snapped off(around.375)) and yes, the inner island is .25in wide, itll be like 1/8 or so and the walls near that will be as thick as the other ones hopefully

05-07-2002, 07:53 AM	#23
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	well guys, my wb blew the gemini off the chart! (or got in first) i have 21c water and 27c cpu wow! its now .09 c/w but last nite it was .125c/w ok maby something is rong, this is full load also! i did put a thermister next to my core and thats were im getting the 27c and a soil probe in my water wich is were i get the 21c so maby it is rite! EDIT: Hoot from ocforums lives near me, and he is gonna test it and compare it to the rest of the top dog blocks(gemini, maze 2 swiftech z4.....)

05-09-2002, 08:27 PM	#24
maskedgeek Registered User Join Date: May 2002 Location: poop Posts: 145	well guys, i reseated my wb and made the probe not touch the wb, so it only touches the core, and im still getting the same results! .1 c/w!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)