Revised MARKII Pics

kibbler · 05-20-2002, 06:16 PM

My earlier post

http://forums.procooling.com/vbb/showthread.php?threadid=3019

Whee!! New Pics!

kibbler · 05-20-2002, 06:17 PM

Stupid, forgot to attach...

kibbler · 05-20-2002, 06:19 PM

The fan I mounted to the bottom of my PSU

kibbler · 05-20-2002, 06:20 PM

The pump switch...(used to be an power socket)

kibbler · 05-20-2002, 06:22 PM

Moved the pump power cord to the back of the motherboard tray. I'll have to check the earlier thread, but whoever's suggestion that was, thanx a bunch, it worked very well. Oh yeah, the pump's turned around, too

Brad · 05-21-2002, 03:06 AM

nice, the pump switch looks particularly professional, the wire at the back of the board is cool too

Cyco-Dude · 05-21-2002, 05:23 AM

Quote:

Originally posted by kibbler
Moved the pump power cord to the back of the motherboard tray. I'll have to check the earlier thread, but whoever's suggestion that was, thanx a bunch, it worked very well. Oh yeah, the pump's turned around, too

that would be me

im planning on doing the same thing with my power cord and IDE cables to reduce the mess around my MoBo. damn i gotta finish my rig and get some pics up LOL!!

anyhow, looks nice

kibbler · 05-21-2002, 06:08 PM

One question, what do you guys do to isolate your pumps from vibration and such? The Eheim is very quiet, but if I remove it from my case, and simply hold it in my hand while it's running, it's completely silent! I'd like a way to keep the pump attached fairly securely to the case, with as much rubber/foam/sponge as possible, I suppose. Any other ideas?

Cyco-Dude · 05-22-2002, 04:18 AM

i tested a few things i had lying around (bubble wrap, white foam, mousepad, etc.), and for me the white foam was the best; it completely isolated the pumps vibration.

05-20-2002, 06:16 PM	#1
kibbler Cooling Savant Join Date: Jan 2002 Posts: 107	Revised MARKII Pics My earlier post http://forums.procooling.com/vbb/showthread.php?threadid=3019 Whee!! New Pics!

05-21-2002, 03:06 AM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	nice, the pump switch looks particularly professional, the wire at the back of the board is cool too __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

05-21-2002, 06:08 PM	#8
kibbler Cooling Savant Join Date: Jan 2002 Posts: 107	One question, what do you guys do to isolate your pumps from vibration and such? The Eheim is very quiet, but if I remove it from my case, and simply hold it in my hand while it's running, it's completely silent! I'd like a way to keep the pump attached fairly securely to the case, with as much rubber/foam/sponge as possible, I suppose. Any other ideas?

05-22-2002, 04:18 AM	#9
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	i tested a few things i had lying around (bubble wrap, white foam, mousepad, etc.), and for me the white foam was the best; it completely isolated the pumps vibration.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)