![]() | ||
|
|
Water Block Design / Construction Building your own block? Need info on designing one? Heres where to do it |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Aug 2002
Location: Pa - USA
Posts: 264
|
![]()
I've been trying to find vendors for the better AL & CU alloys in bar stock.
Aluminum in 1199-H18 (240 W/m-K) or 1199-O (243 W/m-K) and Copper in the Oxygen-free high conductivity types, C102 ,etc... 391-392 W/m-K Searching now, but if anyone already knows any, it would help ![]() Last edited by Can O' Beans; 09-04-2002 at 06:06 AM. |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: May 2001
Location: West Springfield, MA
Posts: 160
|
![]() |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Aug 2002
Location: Pa - USA
Posts: 264
|
![]()
Nope, those places carry the poorer grades.
![]() |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Feb 2002
Location: Dione, sector 4s1256
Posts: 852
|
![]()
look for an electrical contracting company close to you, they usually have what's called "bus-bar" in all shapes and thicknesses.... i'm not 100% on it, but I think that is the good stuff, better than what can be had through a metals shop...
__________________
There is no Spoon.... |
![]() |
![]() |
![]() |
#5 |
Cooling Savant
Join Date: May 2002
Location: Rathdrum, ID
Posts: 380
|
![]()
Cu: 99.9%, O: 0.04%. This is a bad thing? I'm going to be building my own block soon and didn't even think of this.
__________________
**This space for rent** |
![]() |
![]() |
![]() |
#6 |
Cooling Savant
Join Date: Aug 2002
Location: Pa - USA
Posts: 264
|
![]()
Did a google search on copper bus bar, found a few places but theyr'e both "call for info"
![]() I'll try to find local vendor next week. Frag, that copper looks to be good(without a chart at hand..). The C11000 stuff & similar is the one I'm looking for. All are the high conductivity/ oxy free types. |
![]() |
![]() |
![]() |
#7 |
Cooling Savant
Join Date: Feb 2002
Location: Dione, sector 4s1256
Posts: 852
|
![]() the good stuff.....
__________________
There is no Spoon.... |
![]() |
![]() |
![]() |
#8 |
Cooling Savant
Join Date: Aug 2002
Location: Croatia
Posts: 969
|
![]()
and the used stuff...
![]()
__________________
'Out of cheese error... ...please reboot the universe (press the GBL to continue)' |
![]() |
![]() |
![]() |
#9 |
Cooling Savant
Join Date: Sep 2001
Location: Slovenia
Posts: 468
|
![]()
He, he #Rotor, you buy copper by meter
![]() Here in Slovenia there is a company where I can get Cu/Al precutted to whatever I want from standard bars which are in almost all dimensions, and the place is only 6km away so I'm pretty regular there ![]()
__________________
[My ftp, with lots of pics, hope to be home page someday ![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|