My Drill block Design

V12|V12 · 11-20-2002, 07:39 PM

Hey, I was surfing around in here and saw someone post a drill block idea, so I got to working on and idea for a custom one for myself... what do ya think? Of course things would have to be "finished" off with a dremel or something etc...

Peace.

Albigger · 11-20-2002, 09:03 PM

might be me but seems the three drill holes in the upper right and the three in the lower left won't be getting much flow and might be useless.

just a suggestion that it might not need those pathways to function effectively = less work on your part.

utabintarbo · 11-20-2002, 09:03 PM

Looks kinda restrictive. Check out #Rotor's blocks for the ultimate in drill press goodness.

Bob

BTW, Michigan WILL ruin your Saturday. Best not to watch.

Hail to the Victors!

Albigger · 11-20-2002, 09:28 PM

Quote:

Originally posted by utabintarbo

BTW, Michigan WILL ruin your Saturday. Best not to watch. Hail to the Victors!

the only thing that'll be ruined after saturday is Michigan's football season

Can O' Beans · 11-20-2002, 11:18 PM

I agree about the top-right & bottom-left 3 holes won't see any water movement.

The center area looks ok, but are you going to angle it in, kinda like a pyramid, to not restrict the water?

utabintarbo · 11-21-2002, 07:07 AM

Quote:

Originally posted by Albigger
the only thing that'll be ruined after saturday is Michigan's football season

What's to ruin?

Enough threadjacking. If you wish to discuss the relative merits of our football programs, or even why Ohio State grads can only find jobs at Taco Bell, we should move this to the Random Nonsense forum. This would be appropriate given OSU's usual game plan vs. Michigan!

Bob

V12|V12 · 11-24-2002, 05:39 PM

Thanks for the advice on the block folks...

oh yeah and... FIESTA BOWL.... NOW WHAT? haha M = Go home Ivy wanna be's.

11-20-2002, 09:03 PM	#3
utabintarbo Cooling Savant Join Date: Jul 2002 Location: Sterling Hts., MI Posts: 496	Looks kinda restrictive. Check out #Rotor's blocks for the ultimate in drill press goodness. Bob BTW, Michigan WILL ruin your Saturday. Best not to watch. Hail to the Victors! __________________ Sarcasm is yet another of the free services we offer!

11-24-2002, 05:39 PM	#7
V12\|V12 Cooling Savant Join Date: May 2002 Location: Ohio-State! <--Money Hussle! SUCKS Posts: 292	Thanks for the advice on the block folks... oh yeah and... FIESTA BOWL.... NOW WHAT? haha M = Go home Ivy wanna be's. __________________ XP 1600+ AGOIA-Y (GreenLabel, UNLOCKED!@/ NF7-S 2.0/ PC 2700 DDR 10.5*172FSB(1806/ 1991 high), Vcore 1.792...@84.95Watts --86' Chevette Heater Core --1/2" Vinyl tubes --Via1300-Stealth Mod(QUIET!) ---Home made copper-tube block ---PVC small internal res

11-20-2002, 09:03 PM	#2
Albigger Cooling Savant Join Date: Sep 2002 Location: ohio Posts: 140	might be me but seems the three drill holes in the upper right and the three in the lower left won't be getting much flow and might be useless. just a suggestion that it might not need those pathways to function effectively = less work on your part.

11-20-2002, 11:18 PM	#5
Can O' Beans Cooling Savant Join Date: Aug 2002 Location: Pa - USA Posts: 264	I agree about the top-right & bottom-left 3 holes won't see any water movement. The center area looks ok, but are you going to angle it in, kinda like a pyramid, to not restrict the water?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)