Celeron 2 600 (cc0) on Asus P3B-F

cipher769900 · 12-07-2000, 11:52 PM

Using 512mb PC-100 memory at 3-3-3, I can get my C2 600 at 992 rock solid. I want that 18Mhz extra (112FSB). I can get it to boot and run great at 1010Mhz, but it wont post after that. I think my Promise ATA-66 card might be holding me back, but I'm not giving it up for a 18Mhz boost. Does anyone have any suggestions that might help me keep both?

Kevin · 12-08-2000, 12:08 AM

I'm a little unclear about what you are saying... It is rock solid at 992, but it can run great at 1010 mhz... Is it stable @ 1010? And are you sure it isn't the memory? Cas3 PC100 may be hitting its limit around there...

cipher769900 · 12-08-2000, 08:27 AM

I've had the same memory with a p3 800 at 115 and 120 before. My AGP bus is what started giving me trouble at 120. I dont think the memory is a problem.

------------------
Reality Is Irrelevant
http://home.cfl.rr.com/pheenix

cipher769900 · 12-08-2000, 08:28 AM

When it did boot at 1010, it took everything I threw at it. After I powered it down, it would not post.

Joe · 12-08-2000, 09:28 AM

hmmmm weird...

I have an Athlon machine that does that. runs fine but is a beyatch to reboot.

------------------
C-ya
Joe - Owner/Editor
www.ProCooling.com
Where the Completely Addicted Come to Cool Off

Somebody set up us the bomb.

cipher769900 · 12-08-2000, 09:52 AM

I'm tempted to crank it up to 1.95v to see if that helps, but I'm a little nervous about trying it. It's peltier/pep66 cooled and runs about 28 to 32C under load at 992 so cooling isnt a concern

cipher769900 · 12-08-2000, 01:51 PM

Unfortunately 1.95v doesnt help

------------------
Reality Is Irrelevant
http://home.cfl.rr.com/pheenix

Freakyfrank · 12-19-2000, 11:59 AM

i got a slightly older one..
also celII-600
rockstable at 900(maybe 930) at 2.0v
running a few weeks now..
but mine wont even think about booting at 112FSB

tried putting your HD on UDMA33??
and AGP.. bwah.. 124fsb and tnt2ultra says CU.. only a FULL win install will solve it
( its a cheap brand.. thats why)

------------------
OC'ing is my middlename

Freakyfrank · 12-19-2000, 12:01 PM

forgot to tell
1.5v is normal; so a 33% increase!

cipher769900 · 12-19-2000, 12:01 PM

1010 rock solid...w00t

Freakyfrank · 12-24-2000, 08:52 AM

2.0v? or just some burning in
or thrown the promise66 out of the window..

[This message has been edited by Freakyfrank (edited 12-24-2000).]

cipher769900 · 12-24-2000, 09:26 AM

Quote:

Originally posted by Kevin:
I'm a little unclear about what you are saying... It is rock solid at 992, but it can run great at 1010 mhz... Is it stable @ 1010? And are you sure it isn't the memory? Cas3 PC100 may be hitting its limit around there...

Oh yeah, I've had this memory up at 115 and 120Mhz before with no probs

------------------
Reality Is Irrelevant
http://home.cfl.rr.com/pheenix

cipher769900 · 12-24-2000, 09:27 AM

FreakyFrank....I had to mod the voltage on the slotket....I've been at 1010 for well over a week with 0 probs.

------------------
Reality Is Irrelevant
http://home.cfl.rr.com/pheenix

12-07-2000, 11:52 PM	#1
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	Celeron 2 600 (cc0) on Asus P3B-F Using 512mb PC-100 memory at 3-3-3, I can get my C2 600 at 992 rock solid. I want that 18Mhz extra (112FSB). I can get it to boot and run great at 1010Mhz, but it wont post after that. I think my Promise ATA-66 card might be holding me back, but I'm not giving it up for a 18Mhz boost. Does anyone have any suggestions that might help me keep both?

12-08-2000, 12:08 AM	#2
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	I'm a little unclear about what you are saying... It is rock solid at 992, but it can run great at 1010 mhz... Is it stable @ 1010? And are you sure it isn't the memory? Cas3 PC100 may be hitting its limit around there...

12-08-2000, 08:27 AM	#3
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	I've had the same memory with a p3 800 at 115 and 120 before. My AGP bus is what started giving me trouble at 120. I dont think the memory is a problem. ------------------ Reality Is Irrelevant http://home.cfl.rr.com/pheenix

12-08-2000, 08:28 AM	#4
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	When it did boot at 1010, it took everything I threw at it. After I powered it down, it would not post.

12-08-2000, 09:28 AM	#5
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	hmmmm weird... I have an Athlon machine that does that. runs fine but is a beyatch to reboot. ------------------ C-ya Joe - Owner/Editor www.ProCooling.com Where the Completely Addicted Come to Cool Off Somebody set up us the bomb.

12-08-2000, 09:52 AM	#6
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	I'm tempted to crank it up to 1.95v to see if that helps, but I'm a little nervous about trying it. It's peltier/pep66 cooled and runs about 28 to 32C under load at 992 so cooling isnt a concern

12-08-2000, 01:51 PM	#7
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	Unfortunately 1.95v doesnt help ------------------ Reality Is Irrelevant http://home.cfl.rr.com/pheenix

12-19-2000, 11:59 AM	#8
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	i got a slightly older one.. also celII-600 rockstable at 900(maybe 930) at 2.0v running a few weeks now.. but mine wont even think about booting at 112FSB tried putting your HD on UDMA33?? and AGP.. bwah.. 124fsb and tnt2ultra says CU.. only a FULL win install will solve it ( its a cheap brand.. thats why) ------------------ OC'ing is my middlename

12-19-2000, 12:01 PM	#9
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	forgot to tell 1.5v is normal; so a 33% increase!

12-24-2000, 08:52 AM	#11
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	2.0v? or just some burning in or thrown the promise66 out of the window.. [This message has been edited by Freakyfrank (edited 12-24-2000).]

12-24-2000, 09:27 AM	#13
cipher769900 Cooling Neophyte Join Date: Nov 2000 Location: Melbourne, FL, USA Posts: 18	FreakyFrank....I had to mod the voltage on the slotket....I've been at 1010 for well over a week with 0 probs. ------------------ Reality Is Irrelevant http://home.cfl.rr.com/pheenix

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)