|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
Thread Tools |
09-16-2006, 11:39 PM | #1 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Snap 4200 VOL0 won't mount
We had a power outage (while not home) and it lasted longer than the UPS, so down went the server. Now...the server boots and I can connect to it via web admin, but it states that Vol0 is inactive. How can I mount the Volume? I have reset the server to no avail. I have gone into debug.cgi but cannot figure out how to force the mount. The commands that work on my 4000 don't seem to be recognized. Help! It is running Guardian 3.2.026 with 4 80GB drives in raid 5.
Name RAID Set Size Mount Point Status Quotas VOL0 md0 175.44 GB /hd/vol_mnt0 Not mounted Disabled Here's something in the logfile that caught my eye: EXT2-fs warning: checktime reached, running e2fsck is recommended
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 01:05 AM | #2 |
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
Re: Snap 4200 VOL0 won't mount
Is it just me, or are we starting to see more of the Guardian OS units round these parts? Time to stock up on information...
Sorry cianwill, I do not have much of a suggestion here. The only thing I can think of is that maybe the drive got corrupted when the power went out (that does happen to drives sometimes when power is killed). Meaning, maybe you will have to reinitialize the drive(s). But before you go that drastic, let's see what David or some of the others have to suggest... |
09-17-2006, 04:24 AM | #3 |
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: Snap 4200 VOL0 won't mount
Give us a Guardian unit to play with?
Its very hard for us to do much more than guess, or pass on information discovered from these machines with non/few of us having a machine or access to one The Snap OS is based on BSD, whereas Guardian is based on the mainstream linux kernel..... Can you do '?' or whatever it is on the snap to give us a list of debug commands? If so, that could really help us out!
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
09-17-2006, 07:10 AM | #4 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
GNU bash, version 2.04.25(1)-release (i386-quantum-linux-gnu)
These shell commands are defined internally. Type `help' to see this list. Type `help name' to find out more about the function `name'. Use `info bash' to find out more about the shell in general. A star (*) next to a name means that the command is disabled. %[DIGITS | WORD] [&] . filename : [ arg... ] alias [-p] [name[=value] ... ] bg [job_spec] bind [-lpvsPVS] [-m keymap] [-f fi break [n] builtin [shell-builtin [arg ...]] case WORD in [PATTERN [| PATTERN]. cd [-PL] [dir] command [-pVv] command [arg ...] compgen [-abcdefjkvu] [-A action] complete [-abcdefjkvu] [-pr] [-A a continue [n] declare [-afFrxi] [-p] name[=value dirs [-clpv] [+N] [-N] disown [-h] [-ar] [jobspec ...] echo [-neE] [arg ...] enable [-pnds] [-a] [-f filename] eval [arg ...] exec [-cl] [-a name] file [redirec exit [n] export [-nf] [name ...] or export false fc [-e ename] [-nlr] [first] [last fg [job_spec] for NAME [in WORDS ... ;] do COMMA function NAME { COMMANDS ; } or NA getopts optstring name [arg] hash [-r] [-p pathname] [name ...] help [-s] [pattern ...] history [-c] [-d offset] [n] or hi if COMMANDS; then COMMANDS; [ elif jobs [-lnprs] [jobspec ...] or job kill [-s sigspec | -n signum | -si let arg [arg ...] local name[=value] ... logout popd [+N | -N] [-n] printf format [arguments] pushd [dir | +N | -N] [-n] pwd [-PL] read [-ers] [-t timeout] [-p promp readonly [-anf] [name ...] or read return [n] select NAME [in WORDS ... ;] do CO set [--abefhkmnptuvxBCHP] [-o opti shift [n] shopt [-pqsu] [-o long-option] opt source filename suspend [-f] test [expr] time [-p] PIPELINE times trap [arg] [signal_spec ...] or tr true type [-apt] name [name ...] typeset [-afFrxi] [-p] name[=value ulimit [-SHacdflmnpstuv] [limit] umask [-p] [-S] [mode] unalias [-a] [name ...] unset [-f] [-v] [name ...] until COMMANDS; do COMMANDS; done variables - Some variable names an wait [n] while COMMANDS; do COMMANDS; done { COMMANDS ; }
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 07:19 AM | #5 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Above is what I get by going into http://SNAP/admin/debug.cgi
Whether or not this is the correct debug menu, I have no clue. I am running off of the same info that I would use to TS my older Snap OS's Any help would be greatly apperciated, I need that data off the 4200.
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 09:25 AM | #6 |
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: Snap 4200 VOL0 won't mount
Hmm
That looks more like a modified shell on a linux box... Hmm
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
09-17-2006, 11:23 AM | #7 | |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Quote:
And do you have access to the maintance section??? I'm going to look at the Gentoo forums and see if they have any thing of interest. The snap OS cmd will not work on the Grardian os. Built of of different platforms.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
|
09-17-2006, 11:39 AM | #8 | ||
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Found this on Gentoo site. they were refering to the -f flag,
Quote:
Quote:
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 09-17-2006 at 11:50 AM. |
||
09-17-2006, 11:43 AM | #9 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Well,
I have tried to run e2fsck....but i don't think it is working. Maintenace section? Hmmm, well the drives themselves are showing a status of OK. dev info does not work, but I will go into the logfile and see if there is something about the drives...I will past in what info I can find.
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 11:46 AM | #10 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Here is some of the logfile:
XFS: log mount failed kernel Sep 16 03:10:28 XFS: log mount/recovery failed kernel Sep 16 03:10:28 XFS: failed to locate log tail kernel Sep 16 03:10:28 XFS: extended permissions ON kernel Sep 16 03:10:28 XFS: log mount failed kernel Sep 16 03:10:28 XFS: log mount/recovery failed kernel Sep 16 03:10:28 XFS: failed to locate log tail kernel Sep 16 03:10:28 XFS: extended permissions ON kernel Sep 16 03:10:28 disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdg4 kernel Sep 16 03:10:28 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde4 kernel Sep 16 03:10:28 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc4 kernel Sep 16 03:10:28 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda4 kernel Sep 16 03:10:28 --- rd:4 wd:4 fd:0 kernel Sep 16 03:10:28 RAID5 conf printout: kernel Sep 16 03:10:28 disk 3, s:0, o:1, n:3 rd:3 us:1 dev:hdg4 kernel Sep 16 03:10:28 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hde4 kernel Sep 16 03:10:28 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdc4 kernel Sep 16 03:10:28 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hda4
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 11:57 AM | #11 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Here is what I get when trying fsck.ext2 -fcyv /dev/hda4
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 fsck.ext2Couldn't find ext2 superblock, trying backup blocks... : Bad magic number in super-block while trying to open /dev/hda4 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 12:24 PM | #12 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Geading on Gentoo forums, This error will show when you have a drive failure.
Try the -b 8193 superblock option. ls will do a dir list df -h will give you file system usage You may want to try the other drives too fsck.ext2 -fcyv /dev/hdc4 fsck.ext2 -fcyv /dev/hde4 fsck.ext2 -fcyv /dev/hdg4
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
09-17-2006, 12:32 PM | #13 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Command: fsck.ext2 -b 8139
Usage: fsck.ext2 [-panyrcdfvstFSV] [-b superblock] [-B blocksize] [-I inode_buffer_blocks] [-P process_inode_size] [-l|-L bad_blocks_file] [-C fd] device Emergency help: -p Automatic repair (no questions) -n Make no changes to the filesystem -y Assume "yes" to all questions -c Check for bad blocks -f Force checking even if filesystem is marked clean -v Be verbose -b superblock Use alternative superblock -B blocksize Force blocksize when looking for superblock -l bad_blocks_file Add to badblocks list -L bad_blocks_file Set badblocks list Not sure if I am doing this correctly
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 12:34 PM | #14 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Th is what I get with df -h
Filesystem Size Used Avail Use% Mounted on /dev/md100root 529M 265M 264M 50% /
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 12:42 PM | #15 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Here is the drive status:
RAID Set Name: md0 Type: RAID 5 (checksummed) RAID Size: 219.25 GB RAID Status: OK Location Model Size Status Actions Drive 1 80 GB Maxtor-6Y080L0 73.10 GB OK Drive 2 80 GB Maxtor-6Y080L0 73.10 GB OK Drive 3 80 GB Maxtor-6Y080L0 73.10 GB OK Drive 4 80 GB Maxtor-6Y080L0 73.10 GB OK
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 12:55 PM | #16 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Looks like every thing is back to normal.
I would to a shut down then restart and see if it comes up now.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
09-17-2006, 12:56 PM | #17 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
ok, just ran fsck /dev hd1 and got this:
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 e2fsck: need terminal for interactive repairs So, does this mean I need something hooked up to the snap server?
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 01:01 PM | #18 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
The drives have always shown a status of ok...it's the volume that won't mount. Which means my shares don't work...arghhh I have raid 5 for keeping data safe and now I can't even use it.
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 01:44 PM | #19 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
The 4200 has a svga and ps2 port for monitor and keyboard. I thinks it is telling you that you need a direct connection to do the repairs.
Use the -f flag and see if it fixes the problem. If you have the gsu file for your version of OS you may want to re-install it if nothing else works. I'm surprised it not a option when in maintance mode. Have you searched Adpatec (Snap Appliance) knowledge base ????
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
09-17-2006, 02:35 PM | #20 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
Thanks, I'll try to hook up a monitor and KB.
These are my only options in Maintenance: OS Update Upgrade the server's operating system. Factory Defaults Reset the server to factory defaults. Disaster Recovery Prepare for and recover from server failure. Add-on Features Manage Add-on Features Host File Editor Identify your backup server to the Snap Server. Shutdown or Reboot Restart or power down the server. I am digging through Adaptec now...
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 03:48 PM | #21 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Try Disaster recovery
It would be my first choice.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
09-17-2006, 08:05 PM | #22 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
unfortunately, I don't have any images to recover from. I never got that far...
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
09-17-2006, 08:23 PM | #23 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
Give this a try.
fsck.ext2 -b 8139 -fcyv You may have to break down and give Adaptec a Call Or locate the other guy that just came here earlier looking for the Guardian OS. And see if he can help you. sopymattw? Go to gentoo.org forum and ask for help.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 Last edited by blue68f100; 09-17-2006 at 08:40 PM. |
09-17-2006, 08:45 PM | #24 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Snap 4200 VOL0 won't mount
How big was your UPS and was it a network type or std desktop pc type. I want to know if I need to upgrade my UPS units.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
09-17-2006, 10:18 PM | #25 |
Cooling Neophyte
Join Date: Jun 2006
Location: Manassas, VA
Posts: 49
|
Re: Snap 4200 VOL0 won't mount
APC 1100 desktop type - power must have been out for more than 30-40 minutes.
Now i need to figure out how to view the devices like I can on my other snaps (config devices info) because I may have a HD going bad. The log file has a line stating that there is a bad drive (raid1: Disk failure on hdg2, disabling device. ) However, when I look at the HD's in Storage they look fine. So if I need to replace one I need to be absolutely sure which one it is. Thanks for the advice, I'll look on Gentoo. I did not find anything on Adaptec.
__________________
4200 x4 80 GB RAID 5 M4100 x4 160 GB RAID 5 4000 x4 320 GB RAID 5 1100 x1 80 GB 1100 x 1 40 GB |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|