Swiftech 6002-A64 installed...

infinity9 · 07-16-2004, 12:56 AM

Here's a few shots of my new Swiftech 6002-64 installed on a AMD Mobile Athlon 64 3200+. I'm getting the same temps as with the cascade (A64 top cracked

) but with 1C lower idle (not too confident on this yet). So far have been really impressed. I haven't hooked up any temperature sensors this time so depending on MBM, ahhhh! Temps are 40-42 load at 2400 MHz 1.65vcore.

I was planning on upgrading to a 2-342 but honestly I don't think it will do alot for me. My flow rate is very high, when I added the HydrX it was racing through the system immediately. Very impressed with Swiftech stuff. I really love my Cascade but I can't help but feel a little more comfortable with the 6002 in there.

Techmasta · 07-16-2004, 08:15 AM

Nice. That looks just like how my setup used to look. What are going/did you do with the cascade?

How does that soundmat work? Worth the money?

infinity9 · 07-16-2004, 09:14 AM

Well I only have an AMD top left, so I may sell it, dunno though. The soundmat definately helped some. The floor of a case causes alot of the system noise. It's usually an empty metal floor which will reflect noise easy. The spire stuff is cheaper than the Akasa stuff, not alot though. They are both under $15 though.

Techmasta · 07-16-2004, 09:17 AM

Thanks! I may try some of that stuff out. I hate noise.

HammerSandwich · 07-16-2004, 10:38 AM

Infinity, what rad and fan are you using?

infinity9 · 07-16-2004, 11:25 AM

chevette hc + top motor 86cfm fan. works pretty well. i had an aoc alum fan but it started making some vibration causing some bad noise, dunno why, maybe bad bearing. the top motor seems to pull more air at low setting. it does make more noise though.

infinity9 · 08-08-2004, 12:01 AM

updated pics with laing d4. temps are incredible with the d4. load is around 42-43 running at 2470 @ 1.75vcore. its about 7-8c hotter in my room than when original temps were posted.

quicksilverXP · 08-10-2004, 12:43 AM

the real question is.... how much louder is the d4?

msv · 08-10-2004, 01:12 AM

Hmm. I didn´t get it that the Swiftech WB was so flow sensitive. What pump did You use before the D4?
regards
Mikael S.

black_dante · 08-10-2004, 07:45 PM

What motherboard are you using to overclock? and do you recommend the mobile a64 for better overclocks?

infinity9 · 08-10-2004, 08:42 PM

msv - was using the mcp600 before

black dante - its a msi k8n neo plat. the mobile are all cg core to my knowledge which is why i bought it. ive tried another cg desktop but it didnt overclock well at all so cg core doesnt mean much. i just got lucky. the mobiles dont have a heatspreader though which will help with cooling.

trodas · 10-02-2004, 12:05 PM

That's quite sweet WC setup, thumbs up for the work

Temps are kinda amazing too, definitively one of the better ones - with bigger rad they might be even better

MaxxxRacer · 10-07-2004, 04:19 AM

trodas remember temps reported by on die or thermal probes are horribly inaccurate. they are ony relevant to your computer with the same mobo and same cpu....

things are really annoying that way.

07-16-2004, 12:56 AM	#1
infinity9 Cooling Neophyte Join Date: May 2004 Location: NC Posts: 47	Swiftech 6002-A64 installed... Here's a few shots of my new Swiftech 6002-64 installed on a AMD Mobile Athlon 64 3200+. I'm getting the same temps as with the cascade (A64 top cracked ) but with 1C lower idle (not too confident on this yet). So far have been really impressed. I haven't hooked up any temperature sensors this time so depending on MBM, ahhhh! Temps are 40-42 load at 2400 MHz 1.65vcore. I was planning on upgrading to a 2-342 but honestly I don't think it will do alot for me. My flow rate is very high, when I added the HydrX it was racing through the system immediately. Very impressed with Swiftech stuff. I really love my Cascade but I can't help but feel a little more comfortable with the 6002 in there. Last edited by infinity9; 08-07-2004 at 11:55 PM.

07-16-2004, 10:38 AM	#5
HammerSandwich Cooling Savant Join Date: Oct 2003 Location: 15143 Posts: 358	Infinity, what rad and fan are you using? __________________ www.procooling.com: It's true we are often a bunch of assholes

08-10-2004, 01:12 AM	#9
msv Cooling Savant Join Date: Dec 2002 Location: Sweden Posts: 336	Hmm. I didn´t get it that the Swiftech WB was so flow sensitive. What pump did You use before the D4? regards Mikael S. __________________ The only constant factor in all Your failures is You. Catapultam habeo. Nisi pecuniam omnen mihi habis, ad caput tuum saxum immane mittam.

10-02-2004, 12:05 PM	#12
trodas Cooling Neophyte Join Date: Sep 2004 Location: Czech republic Posts: 22	That's quite sweet WC setup, thumbs up for the work Temps are kinda amazing too, definitively one of the better ones - with bigger rad they might be even better __________________ "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire ...just keep folding, just keep folding... my config - my caps

10-07-2004, 04:19 AM	#13
MaxxxRacer Cooling Savant Join Date: Sep 2004 Location: Los Angeles, Ca Posts: 310	trodas remember temps reported by on die or thermal probes are horribly inaccurate. they are ony relevant to your computer with the same mobo and same cpu.... things are really annoying that way. __________________ Excuse me, I believe you have my stapler.

07-16-2004, 08:15 AM	#2
Techmasta Cooling Neophyte Join Date: Sep 2003 Location: USA Posts: 74	Nice. That looks just like how my setup used to look. What are going/did you do with the cascade? How does that soundmat work? Worth the money?

07-16-2004, 09:14 AM	#3
infinity9 Cooling Neophyte Join Date: May 2004 Location: NC Posts: 47	Well I only have an AMD top left, so I may sell it, dunno though. The soundmat definately helped some. The floor of a case causes alot of the system noise. It's usually an empty metal floor which will reflect noise easy. The spire stuff is cheaper than the Akasa stuff, not alot though. They are both under $15 though.

07-16-2004, 09:17 AM	#4
Techmasta Cooling Neophyte Join Date: Sep 2003 Location: USA Posts: 74	Thanks! I may try some of that stuff out. I hate noise.

07-16-2004, 11:25 AM	#6
infinity9 Cooling Neophyte Join Date: May 2004 Location: NC Posts: 47	chevette hc + top motor 86cfm fan. works pretty well. i had an aoc alum fan but it started making some vibration causing some bad noise, dunno why, maybe bad bearing. the top motor seems to pull more air at low setting. it does make more noise though.

08-08-2004, 12:01 AM	#7
infinity9 Cooling Neophyte Join Date: May 2004 Location: NC Posts: 47	updated pics with laing d4. temps are incredible with the d4. load is around 42-43 running at 2470 @ 1.75vcore. its about 7-8c hotter in my room than when original temps were posted.

08-10-2004, 12:43 AM	#8
quicksilverXP Cooling Neophyte Join Date: Jun 2004 Location: Irvine Posts: 58	the real question is.... how much louder is the d4?

08-10-2004, 07:45 PM	#10
black_dante Cooling Neophyte Join Date: Aug 2004 Location: nyc Posts: 48	What motherboard are you using to overclock? and do you recommend the mobile a64 for better overclocks?

08-10-2004, 08:42 PM	#11
infinity9 Cooling Neophyte Join Date: May 2004 Location: NC Posts: 47	msv - was using the mcp600 before black dante - its a msi k8n neo plat. the mobile are all cg core to my knowledge which is why i bought it. ive tried another cg desktop but it didnt overclock well at all so cg core doesnt mean much. i just got lucky. the mobiles dont have a heatspreader though which will help with cooling.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)