1100 with no hard drive
 

I have a 1100 with no hard drive. I want to install a hard drive.
Does the OS for the 1100 reside on the drive or on the motherboard?
Anyone know how I can install a hard drive to work in the 1100?

Thanks for all the replies.

Re: 1100 with no hard drive
 

First go here:
http://forums.procooling.com/vbb/showthread.php?t=13820
Post #1
FAQ's for Specific Models
1x00 FAQ
2. My HD has failed. How do I replace it?
A. The 1000v1 has the OS stored in flash ram, just install the hd. It takes about 10 min before you can connect to the web interface.
B. If you have a 1000v2 or 1100 you must transfer the boot tracks from a working unit or by the use of image files. There are 2 different image files used to recover from a failed drive in the 1x00's.
C. The 1000's normally use a 1000 image file, but if you get a 1 x 2 LED blinking pattern it requires the 2200.img file.
D. The 1000v2 & 1100 requires an image file to be copied to the new drive. (Normally the 2200 image file)
Note: You need to reinstall the OS after doing an image file recovery to replace any missing OS files.

Then go here:
http://forums.procooling.com/vbb/showthread.php?t=15648

regards...

Re: 1100 with no hard drive
 

I have a disk from a 1000. When I install it, the system led blinks once with the Disk LED and then the disk LED blinks separately while the system LED is on. Is the 1000 HDD compatible?

Re: 1100 with no hard drive
 

Only one way to find out? Can you find it and access it?

Re: 1100 with no hard drive
 

I tried to access it http://snap######/config. Nothing. Is there another way to access it?

Any idea what that LED pattern is? System 1x, Disk 2x, repeat.

Re: 1100 with no hard drive
 

Read the FAQ's, I have something on the 1 x 2 pattern.

Re: 1100 with no hard drive
 

OK, I have some work to do on this SNAP.
I'll get it done as time permits and I'll report back on the results.
Thanks!