A bit confused here. Have used 2 ATX psu's before with success in a pc setup but had to tie the "power good" and "power on" to ground on one psu while using the other psu to power up the pc (athlonoc.com, o/c co.uk show how), the first psu powered the pelt. The article does not mention this requirement. Is this only necessary with ATX boxes? Also the above websites tie these signals to ground but I'm hearing that in truth they should be tied to +5v dc. Is this so? Anybody help me out here as 172 watt peltage is definitely a desire.
__________________
Rig 1
Epox 8KHA+ XP1600 AGNGA-Y 1936MHz @2.08v, 176x11. NEW Swiftech MCW462UT-H (226W tec) rover (uk) hcore. Winbond 5ns mem. Leadtek Ti200. SBLive5.1. Maxtor D740 20Gb HD. WXP Pro, . Heavily modded Yeong Yang cube with all fans powered off the PC psu through Papst fan controllers.
Rigs+mbike
Rig 2
SUPER (YES!! WITH WINXP) XP333R BACK (8K3A+ STOLEN BY UNI CONSCRIPT). TBird (unlocked)1200@1400, TwinMOS/samsung 5ns mem. Modded GW802 case with 12v/7v cpu/case fans
|