Pro/Forums - View Single Post

blue68f100 · 02-16-2006, 08:29 AM

Have you let it set over night to see if it continues. Rebuilding arrars can be slow. It has to read the data on all other drives to generate the bit that is missing.

Make sure the cpu and all cables are seated good. Received an email from one user that the cpu was not seated properly on a PV705. Not having a 4100 can not confirm.

Don't give up yet. There still hope.

02-16-2006, 08:29 AM	#8
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Error Message Have you let it set over night to see if it continues. Rebuilding arrars can be slow. It has to read the data on all other drives to generate the bit that is missing. Make sure the cpu and all cables are seated good. Received an email from one user that the cpu was not seated properly on a PV705. Not having a 4100 can not confirm. Don't give up yet. There still hope. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820